[U-Boot] [PATCH 2/2] tegra: seaboard: Correct the gpio_request() call

[Simon Glass]

Hi Tom,

On 9 March 2015 at 19:16, Simon Glass <sjg at chromium.org> wrote:
> Let's try this:
>
> Reported-by: Stephen Warren <swarren at nvidia.com>
>
>
> On 9 March 2015 at 19:12, Simon Glass <sjg at chromium.org> wrote:
>> Requesting a GPIO without a name is not supposed anymore. This causes the
>> request to fail. Add a name so that the serial console works on seaboard.
>>
>> Signed-off-by: Simon Glass <sjg at chromium.org>

Can you please apply this fix?

>> ---
>>
>>  board/nvidia/seaboard/seaboard.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
>> index 25480e4..2d07001 100644
>> --- a/board/nvidia/seaboard/seaboard.c
>> +++ b/board/nvidia/seaboard/seaboard.c
>> @@ -20,7 +20,7 @@
>>  void gpio_early_init_uart(void)
>>  {
>>         /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
>> -       gpio_request(GPIO_PI3, NULL);
>> +       gpio_request(GPIO_PI3, "uart_en");
>>         gpio_direction_output(GPIO_PI3, 0);
>>  }
>>  #endif
>> --
>> 2.2.0.rc0.207.ga3a616c
>>

Regards,
Simon