[U-Boot] [PATCH 0/3] sunxi: Yones Toptech BD1078 support

[Hans de Goede]

Hi,

p.s.


On 22-03-15 18:12, Paul Kocialkowski wrote:
> This series goes on top of my previous series that concludes with Ainol AW1
> support.
>
> Also, if you're interested by the idea of using sunxi_name_to_gpio_bank, this
> could be extended for UART as well, where *many* different pin mux setups are
> possible. We are just lucky that hardware designers usually use the ports that
> U-Boot selects, but there is no fundamental reason for that.

I'm not really interested in making the #ifdeffery for the uart setup even
more complicated, eventually we should get all this info, including all the
pinmux stuff from a dtb (shared with the kernel) appended to the u-boot binary,
and then this will use standard devicetree pinmux stuff, until we get there
I would like to keep this as simple as possible.

Regards,

Hans