[U-Boot] [PATCH 0/3] sunxi: Yones Toptech BD1078 support

[Paul Kocialkowski]

Le lundi 23 mars 2015 à 17:26 +0100, Hans de Goede a écrit :
> Hi,
> 
> p.s.
> 
> 
> On 22-03-15 18:12, Paul Kocialkowski wrote:
> > This series goes on top of my previous series that concludes with Ainol AW1
> > support.
> >
> > Also, if you're interested by the idea of using sunxi_name_to_gpio_bank, this
> > could be extended for UART as well, where *many* different pin mux setups are
> > possible. We are just lucky that hardware designers usually use the ports that
> > U-Boot selects, but there is no fundamental reason for that.
> 
> I'm not really interested in making the #ifdeffery for the uart setup even
> more complicated, eventually we should get all this info, including all the
> pinmux stuff from a dtb (shared with the kernel) appended to the u-boot binary,
> and then this will use standard devicetree pinmux stuff, until we get there
> I would like to keep this as simple as possible.

Understood. There was a real need for mmc as the previous setups were
just wrong for platforms != (sun4i || sun7i), but in the case of UART,
it just remains minimalistic, which is fine.

-- 
Paul Kocialkowski, Replicant developer

Replicant is a fully free Android distribution running on several
devices, a free software mobile operating system putting the emphasis on
freedom and privacy/security.

Website: http://www.replicant.us/
Blog: http://blog.replicant.us/
Wiki/tracker/forums: http://redmine.replicant.us/

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150323/f594977d/attachment.sig>