[U-Boot] [PATCH v3 08/17] dm: regulator: add regulator command
Przemyslaw Marczak
p.marczak at samsung.com
Tue Mar 24 21:30:42 CET 2015
This command is based on driver model regulator api.
User interface features:
- list - list UCLASS regulator devices
- regulator dev [id] - show or [set] operating regulator device
- regulator [info] - print constraints info
- regulator [status] - print operating status
- regulator [value] [-f] - print/[set] voltage value [uV] (force)
- regulator [current] - print/[set] current value [uA]
- regulator [mode_id] - print/[set] operating mode id
- regulator [enable] - enable the regulator output
- regulator [disable] - disable the regulator output
The 'force' option can be used for setting the value which exceeds the limits,
which are found in device-tree and are keept in regulators info structure.
Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
---
Changes v3:
- new file
- Kconfig entry
---
common/Kconfig | 22 +++
common/Makefile | 1 +
common/cmd_regulator.c | 385 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 408 insertions(+)
create mode 100644 common/cmd_regulator.c
diff --git a/common/Kconfig b/common/Kconfig
index 1125e6d..48f360f 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -348,5 +348,27 @@ config DM_PMIC_CMD
- pmic read address - read byte of register at address
- pmic write address - write byte to register at address
The only one change for this command is 'dev' subcommand.
+
+config DM_REGULATOR_CMD
+ bool "Enable Driver Model REGULATOR command"
+ depends on DM_REGULATOR
+ help
+ This command is based on driver model regulator api.
+ User interface features:
+ - list - list UCLASS regulator devices
+ - regulator dev [id] - show or [set] operating regulator device
+ - regulator [info] - print constraints info
+ - regulator [status] - print operating status
+ - regulator [value] [-f] - print/[set] voltage value [uV] (force)
+ - regulator [current] - print/[set] current value [uA]
+ - regulator [mode_id] - print/[set] operating mode id
+ - regulator [enable] - enable the regulator output
+ - regulator [disable] - disable the regulator output
+
+ The 'force' option can be used for setting the value which exceeds
+ the limit which are found in device-tree and are keept in regulators
+ info structure.
+
endmenu
+
endmenu
diff --git a/common/Makefile b/common/Makefile
index d908851..d63fe12 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -211,6 +211,7 @@ obj-$(CONFIG_CMD_GPT) += cmd_gpt.o
# Power
obj-$(CONFIG_DM_PMIC_CMD) += cmd_pmic.o
+obj-$(CONFIG_DM_REGULATOR_CMD) += cmd_regulator.o
endif
ifdef CONFIG_SPL_BUILD
diff --git a/common/cmd_regulator.c b/common/cmd_regulator.c
new file mode 100644
index 0000000..d388b14
--- /dev/null
+++ b/common/cmd_regulator.c
@@ -0,0 +1,385 @@
+/*
+ * Copyright (C) 2014-2015 Samsung Electronics
+ * Przemyslaw Marczak <p.marczak at samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <fdtdec.h>
+#include <dm.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+#include <dm/root.h>
+#include <dm/lists.h>
+#include <i2c.h>
+#include <compiler.h>
+#include <errno.h>
+
+#define LIMIT_SEQ 3
+#define LIMIT_DEVNAME 20
+#define LIMIT_OFNAME 20
+#define LIMIT_INFO 12
+
+static struct udevice *reg_curr;
+
+static int failed(const char *getset, const char *thing,
+ const char *for_dev, int ret)
+{
+ printf("Can't %s %s %s.\nError: %d (%s)\n", getset, thing, for_dev,
+ ret, errno_str(ret));
+ return CMD_RET_FAILURE;
+}
+
+static int do_dev(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct dm_regulator_info *info;
+ int seq, ret = CMD_RET_FAILURE;
+
+ switch (argc) {
+ case 2:
+ seq = simple_strtoul(argv[1], NULL, 0);
+ uclass_get_device_by_seq(UCLASS_REGULATOR, seq, ®_curr);
+ case 1:
+ ret = regulator_info(reg_curr, &info);
+ if (ret)
+ return failed("get", "the", "device", ret);
+
+ printf("dev: %d @ %s\n", reg_curr->seq, info->name);
+ }
+
+ return CMD_RET_SUCCESS;
+}
+
+static int get_curr_dev_and_info(struct udevice **devp,
+ struct dm_regulator_info **infop)
+{
+ int ret = -ENODEV;
+
+ *devp = reg_curr;
+ if (!*devp)
+ return failed("get", "current", "device", ret);
+
+ ret = regulator_info(*devp, infop);
+ if (ret)
+ return failed("get", reg_curr->name, "info", ret);
+
+ return CMD_RET_SUCCESS;
+}
+
+static int do_list(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct dm_regulator_info *info;
+ const char *parent_uc;
+ struct udevice *dev;
+ int ret;
+
+ printf("|%*s | %*.*s @ %-*.*s| %s @ %s\n",
+ LIMIT_SEQ, "Seq",
+ LIMIT_DEVNAME, LIMIT_DEVNAME, "Name",
+ LIMIT_OFNAME, LIMIT_OFNAME, "fdtname",
+ "Parent", "uclass");
+
+ for (ret = uclass_first_device(UCLASS_REGULATOR, &dev); dev;
+ ret = uclass_next_device(&dev)) {
+ if (regulator_info(dev, &info)) {
+ printf("(null) info for: %s\n", dev->name);
+ continue;
+ }
+
+ /* Parent uclass name*/
+ parent_uc = dev->parent->uclass->uc_drv->name;
+
+ printf("|%*d | %*.*s @ %-*.*s| %s @ %s\n",
+ LIMIT_SEQ, dev->seq,
+ LIMIT_DEVNAME, LIMIT_DEVNAME, dev->name,
+ LIMIT_OFNAME, LIMIT_OFNAME, info->name,
+ dev->parent->name, parent_uc);
+ }
+
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ return CMD_RET_SUCCESS;
+}
+
+static int do_info(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct udevice *dev;
+ struct dm_regulator_info *info;
+ struct dm_regulator_mode *modes;
+ const char *parent_uc;
+ int mode_count;
+ int ret;
+ int i;
+
+ ret = get_curr_dev_and_info(&dev, &info);
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ parent_uc = dev->parent->uclass->uc_drv->name;
+
+ printf("Uclass regulator dev %d info:\n", dev->seq);
+ printf("%-*s %s @ %s\n%-*s %s\n%-*s %s\n",
+ LIMIT_INFO, "* parent:", dev->parent->name, parent_uc,
+ LIMIT_INFO, "* dev name:", dev->name,
+ LIMIT_INFO, "* fdt name:", info->name);
+
+ printf("%-*s %d\n%-*s %d\n%-*s %d\n%-*s %d\n%-*s %s\n%-*s %s\n",
+ LIMIT_INFO, "* min uV:", info->min_uV,
+ LIMIT_INFO, "* max uV:", info->max_uV,
+ LIMIT_INFO, "* min uA:", info->min_uA,
+ LIMIT_INFO, "* max uA:", info->max_uA,
+ LIMIT_INFO, "* always on:", info->always_on ? "true" : "false",
+ LIMIT_INFO, "* boot on:", info->boot_on ? "true" : "false");
+
+ mode_count = regulator_mode(dev, &modes);
+ if (!mode_count)
+ return failed("get mode", "for mode", "null count", -EPERM);
+
+ if (mode_count < 0)
+ return failed("get", info->name, "mode count", mode_count);
+
+ printf("* operation modes:\n");
+ for (i = 0; i < mode_count; i++, modes++)
+ printf(" - mode %d (%s)\n", modes->id, modes->name);
+
+ return CMD_RET_SUCCESS;
+}
+
+static const char *get_mode_name(struct dm_regulator_mode *mode,
+ int mode_count,
+ int mode_id)
+{
+ while (mode_count--) {
+ if (mode->id == mode_id)
+ return mode->name;
+ mode++;
+ }
+
+ return NULL;
+}
+
+static int do_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct udevice *dev;
+ struct dm_regulator_info *info;
+ const char *mode_name;
+ int value, mode, ret;
+ bool enabled;
+
+ ret = get_curr_dev_and_info(&dev, &info);
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ /* Value is mandatory */
+ value = regulator_get_value(dev);
+ if (value < 0)
+ return failed("get", info->name, "voltage value", value);
+
+ mode = regulator_get_mode(dev);
+ mode_name = get_mode_name(info->mode, info->mode_count, mode);
+ enabled = regulator_get_enable(dev);
+
+ printf("Regulator seq %d status:\n", dev->seq);
+ printf("%-*s %d\n%-*s %d (%s)\n%-*s %s\n",
+ LIMIT_INFO, " * value:", value,
+ LIMIT_INFO, " * mode:", mode, mode_name,
+ LIMIT_INFO, " * enabled:", enabled ? "true" : "false");
+
+ return CMD_RET_SUCCESS;
+}
+
+static int do_value(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct udevice *dev;
+ struct dm_regulator_info *info;
+ int value;
+ int force;
+ int ret;
+
+ ret = get_curr_dev_and_info(&dev, &info);
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ if (argc == 1) {
+ value = regulator_get_value(dev);
+ if (value < 0)
+ return failed("get", info->name, "voltage", value);
+
+ printf("%d uV\n", value);
+ return CMD_RET_SUCCESS;
+ }
+
+ if (info->type == REGULATOR_TYPE_FIXED) {
+ printf("Fixed regulator value change not allowed.\n");
+ return CMD_RET_SUCCESS;
+ }
+
+ if (argc == 3)
+ force = !strcmp("-f", argv[2]);
+ else
+ force = 0;
+
+ value = simple_strtoul(argv[1], NULL, 0);
+ if ((value < info->min_uV || value > info->max_uV) && !force) {
+ printf("Value exceeds regulator constraint limits\n");
+ return CMD_RET_FAILURE;
+ }
+
+ ret = regulator_set_value(dev, value);
+ if (ret)
+ return failed("set", info->name, "voltage value", ret);
+
+ return CMD_RET_SUCCESS;
+}
+
+static int do_current(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct udevice *dev;
+ struct dm_regulator_info *info;
+ int current;
+ int ret;
+
+ ret = get_curr_dev_and_info(&dev, &info);
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ if (argc == 1) {
+ current = regulator_get_current(dev);
+ if (current < 0)
+ return failed("get", info->name, "current", current);
+
+ printf("%d uA\n", current);
+ return CMD_RET_SUCCESS;
+ }
+
+ if (info->type == REGULATOR_TYPE_FIXED) {
+ printf("Fixed regulator current change not allowed.\n");
+ return CMD_RET_SUCCESS;
+ }
+
+ current = simple_strtoul(argv[1], NULL, 0);
+ if (current < info->min_uA || current > info->max_uA) {
+ printf("Current exceeds regulator constraint limits\n");
+ return CMD_RET_FAILURE;
+ }
+
+ ret = regulator_set_current(dev, current);
+ if (ret)
+ return failed("set", info->name, "current value", ret);
+
+ return CMD_RET_SUCCESS;
+}
+
+static int do_mode(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct udevice *dev;
+ struct dm_regulator_info *info;
+ int new_mode;
+ int mode;
+ int ret;
+
+ ret = get_curr_dev_and_info(&dev, &info);
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ if (info->type == REGULATOR_TYPE_FIXED) {
+ printf("Fixed regulator mode option not allowed.\n");
+ return CMD_RET_SUCCESS;
+ }
+
+ if (argc == 1) {
+ mode = regulator_get_mode(dev);
+ if (mode < 0)
+ return failed("get", info->name, "mode", ret);
+
+ printf("mode id: %d\n", mode);
+ return CMD_RET_SUCCESS;
+ }
+
+ new_mode = simple_strtoul(argv[1], NULL, 0);
+
+ ret = regulator_set_mode(dev, new_mode);
+ if (ret)
+ return failed("set", info->name, "mode", ret);
+
+ return CMD_RET_SUCCESS;
+}
+
+static int do_enable(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct udevice *dev;
+ struct dm_regulator_info *info;
+ int ret;
+
+ ret = get_curr_dev_and_info(&dev, &info);
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ ret = regulator_set_enable(dev, true);
+ if (ret)
+ return failed("enable", "regulator", info->name, ret);
+
+ return CMD_RET_SUCCESS;
+}
+
+static int do_disable(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct udevice *dev;
+ struct dm_regulator_info *info;
+ int ret;
+
+ ret = get_curr_dev_and_info(&dev, &info);
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ ret = regulator_set_enable(dev, false);
+ if (ret)
+ return failed("disable", "regulator", info->name, ret);
+
+ return CMD_RET_SUCCESS;
+}
+
+static cmd_tbl_t subcmd[] = {
+ U_BOOT_CMD_MKENT(dev, 2, 1, do_dev, "", ""),
+ U_BOOT_CMD_MKENT(list, 1, 1, do_list, "", ""),
+ U_BOOT_CMD_MKENT(info, 2, 1, do_info, "", ""),
+ U_BOOT_CMD_MKENT(status, 2, 1, do_status, "", ""),
+ U_BOOT_CMD_MKENT(value, 3, 1, do_value, "", ""),
+ U_BOOT_CMD_MKENT(current, 3, 1, do_current, "", ""),
+ U_BOOT_CMD_MKENT(mode, 2, 1, do_mode, "", ""),
+ U_BOOT_CMD_MKENT(enable, 1, 1, do_enable, "", ""),
+ U_BOOT_CMD_MKENT(disable, 1, 1, do_disable, "", ""),
+};
+
+static int do_regulator(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ cmd_tbl_t *cmd;
+
+ argc--;
+ argv++;
+
+ cmd = find_cmd_tbl(argv[0], subcmd, ARRAY_SIZE(subcmd));
+ if (cmd == NULL || argc > cmd->maxargs)
+ return CMD_RET_USAGE;
+
+ return cmd->cmd(cmdtp, flag, argc, argv);
+}
+
+U_BOOT_CMD(regulator, CONFIG_SYS_MAXARGS, 1, do_regulator,
+ "uclass operations",
+ "list - list UCLASS regulator devices\n"
+ "regulator dev [id] - show or [set] operating regulator device\n"
+ "regulator [info] - print constraints info\n"
+ "regulator [status] - print operating status\n"
+ "regulator [value] [-f] - print/[set] voltage value [uV] (force)\n"
+ "regulator [current] - print/[set] current value [uA]\n"
+ "regulator [mode_id] - print/[set] operating mode id\n"
+ "regulator [enable] - enable the regulator output\n"
+ "regulator [disable] - disable the regulator output\n"
+);
--
1.9.1
More information about the U-Boot
mailing list