[U-Boot] [PATCH v3 08/17] dm: regulator: add regulator command
Simon Glass
sjg at chromium.org
Sun Mar 29 15:07:59 CEST 2015
Hi Przemyslaw,
On 24 March 2015 at 14:30, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
> This command is based on driver model regulator api.
> User interface features:
> - list - list UCLASS regulator devices
> - regulator dev [id] - show or [set] operating regulator device
> - regulator [info] - print constraints info
> - regulator [status] - print operating status
> - regulator [value] [-f] - print/[set] voltage value [uV] (force)
> - regulator [current] - print/[set] current value [uA]
> - regulator [mode_id] - print/[set] operating mode id
> - regulator [enable] - enable the regulator output
> - regulator [disable] - disable the regulator output
>
> The 'force' option can be used for setting the value which exceeds the limits,
> which are found in device-tree and are keept in regulators info structure.
>
> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
>
> ---
> Changes v3:
> - new file
> - Kconfig entry
> ---
> common/Kconfig | 22 +++
> common/Makefile | 1 +
> common/cmd_regulator.c | 385 +++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 408 insertions(+)
> create mode 100644 common/cmd_regulator.c
>
> diff --git a/common/Kconfig b/common/Kconfig
> index 1125e6d..48f360f 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -348,5 +348,27 @@ config DM_PMIC_CMD
> - pmic read address - read byte of register at address
> - pmic write address - write byte to register at address
> The only one change for this command is 'dev' subcommand.
> +
> +config DM_REGULATOR_CMD
CMD_DM_REGULATOR
> + bool "Enable Driver Model REGULATOR command"
> + depends on DM_REGULATOR
> + help
> + This command is based on driver model regulator api.
> + User interface features:
> + - list - list UCLASS regulator devices
Do you need 'UCLASS" in there? What does it mean?
> + - regulator dev [id] - show or [set] operating regulator device
> + - regulator [info] - print constraints info
> + - regulator [status] - print operating status
> + - regulator [value] [-f] - print/[set] voltage value [uV] (force)
> + - regulator [current] - print/[set] current value [uA]
> + - regulator [mode_id] - print/[set] operating mode id
> + - regulator [enable] - enable the regulator output
> + - regulator [disable] - disable the regulator output
I don't think the sub-commands should be in [].
> +
> + The 'force' option can be used for setting the value which exceeds
> + the limit which are found in device-tree and are keept in regulators
> + info structure.
> +
> endmenu
> +
> endmenu
> diff --git a/common/Makefile b/common/Makefile
> index d908851..d63fe12 100644
> --- a/common/Makefile
> +++ b/common/Makefile
> @@ -211,6 +211,7 @@ obj-$(CONFIG_CMD_GPT) += cmd_gpt.o
>
> # Power
> obj-$(CONFIG_DM_PMIC_CMD) += cmd_pmic.o
> +obj-$(CONFIG_DM_REGULATOR_CMD) += cmd_regulator.o
> endif
>
> ifdef CONFIG_SPL_BUILD
> diff --git a/common/cmd_regulator.c b/common/cmd_regulator.c
> new file mode 100644
> index 0000000..d388b14
> --- /dev/null
> +++ b/common/cmd_regulator.c
> @@ -0,0 +1,385 @@
> +/*
> + * Copyright (C) 2014-2015 Samsung Electronics
> + * Przemyslaw Marczak <p.marczak at samsung.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +#include <common.h>
> +#include <linux/types.h>
> +#include <linux/ctype.h>
> +#include <fdtdec.h>
> +#include <dm.h>
> +#include <power/pmic.h>
> +#include <power/regulator.h>
> +#include <dm/device-internal.h>
> +#include <dm/uclass-internal.h>
> +#include <dm/root.h>
> +#include <dm/lists.h>
> +#include <i2c.h>
> +#include <compiler.h>
> +#include <errno.h>
> +
> +#define LIMIT_SEQ 3
> +#define LIMIT_DEVNAME 20
> +#define LIMIT_OFNAME 20
> +#define LIMIT_INFO 12
> +
> +static struct udevice *reg_curr;
> +
> +static int failed(const char *getset, const char *thing,
> + const char *for_dev, int ret)
> +{
> + printf("Can't %s %s %s.\nError: %d (%s)\n", getset, thing, for_dev,
> + ret, errno_str(ret));
> + return CMD_RET_FAILURE;
> +}
> +
> +static int do_dev(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + struct dm_regulator_info *info;
> + int seq, ret = CMD_RET_FAILURE;
> +
> + switch (argc) {
> + case 2:
> + seq = simple_strtoul(argv[1], NULL, 0);
> + uclass_get_device_by_seq(UCLASS_REGULATOR, seq, ®_curr);
This can return an error.
> + case 1:
> + ret = regulator_info(reg_curr, &info);
> + if (ret)
> + return failed("get", "the", "device", ret);
> +
> + printf("dev: %d @ %s\n", reg_curr->seq, info->name);
> + }
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +static int get_curr_dev_and_info(struct udevice **devp,
> + struct dm_regulator_info **infop)
> +{
> + int ret = -ENODEV;
> +
> + *devp = reg_curr;
> + if (!*devp)
> + return failed("get", "current", "device", ret);
> +
> + ret = regulator_info(*devp, infop);
> + if (ret)
> + return failed("get", reg_curr->name, "info", ret);
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +static int do_list(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + struct dm_regulator_info *info;
> + const char *parent_uc;
> + struct udevice *dev;
> + int ret;
> +
> + printf("|%*s | %*.*s @ %-*.*s| %s @ %s\n",
> + LIMIT_SEQ, "Seq",
> + LIMIT_DEVNAME, LIMIT_DEVNAME, "Name",
> + LIMIT_OFNAME, LIMIT_OFNAME, "fdtname",
> + "Parent", "uclass");
> +
> + for (ret = uclass_first_device(UCLASS_REGULATOR, &dev); dev;
> + ret = uclass_next_device(&dev)) {
> + if (regulator_info(dev, &info)) {
> + printf("(null) info for: %s\n", dev->name);
> + continue;
> + }
> +
> + /* Parent uclass name*/
> + parent_uc = dev->parent->uclass->uc_drv->name;
> +
> + printf("|%*d | %*.*s @ %-*.*s| %s @ %s\n",
> + LIMIT_SEQ, dev->seq,
> + LIMIT_DEVNAME, LIMIT_DEVNAME, dev->name,
> + LIMIT_OFNAME, LIMIT_OFNAME, info->name,
> + dev->parent->name, parent_uc);
> + }
> +
> + if (ret)
> + return CMD_RET_FAILURE;
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +static int do_info(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + struct udevice *dev;
> + struct dm_regulator_info *info;
> + struct dm_regulator_mode *modes;
> + const char *parent_uc;
> + int mode_count;
> + int ret;
> + int i;
> +
> + ret = get_curr_dev_and_info(&dev, &info);
> + if (ret)
> + return CMD_RET_FAILURE;
> +
> + parent_uc = dev->parent->uclass->uc_drv->name;
> +
> + printf("Uclass regulator dev %d info:\n", dev->seq);
> + printf("%-*s %s @ %s\n%-*s %s\n%-*s %s\n",
> + LIMIT_INFO, "* parent:", dev->parent->name, parent_uc,
> + LIMIT_INFO, "* dev name:", dev->name,
> + LIMIT_INFO, "* fdt name:", info->name);
> +
> + printf("%-*s %d\n%-*s %d\n%-*s %d\n%-*s %d\n%-*s %s\n%-*s %s\n",
> + LIMIT_INFO, "* min uV:", info->min_uV,
> + LIMIT_INFO, "* max uV:", info->max_uV,
> + LIMIT_INFO, "* min uA:", info->min_uA,
> + LIMIT_INFO, "* max uA:", info->max_uA,
> + LIMIT_INFO, "* always on:", info->always_on ? "true" : "false",
> + LIMIT_INFO, "* boot on:", info->boot_on ? "true" : "false");
> +
> + mode_count = regulator_mode(dev, &modes);
> + if (!mode_count)
> + return failed("get mode", "for mode", "null count", -EPERM);
> +
> + if (mode_count < 0)
> + return failed("get", info->name, "mode count", mode_count);
> +
> + printf("* operation modes:\n");
> + for (i = 0; i < mode_count; i++, modes++)
> + printf(" - mode %d (%s)\n", modes->id, modes->name);
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +static const char *get_mode_name(struct dm_regulator_mode *mode,
> + int mode_count,
> + int mode_id)
> +{
> + while (mode_count--) {
> + if (mode->id == mode_id)
> + return mode->name;
> + mode++;
> + }
> +
> + return NULL;
> +}
> +
> +static int do_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + struct udevice *dev;
> + struct dm_regulator_info *info;
> + const char *mode_name;
> + int value, mode, ret;
> + bool enabled;
> +
> + ret = get_curr_dev_and_info(&dev, &info);
> + if (ret)
> + return CMD_RET_FAILURE;
> +
> + /* Value is mandatory */
> + value = regulator_get_value(dev);
> + if (value < 0)
> + return failed("get", info->name, "voltage value", value);
> +
> + mode = regulator_get_mode(dev);
> + mode_name = get_mode_name(info->mode, info->mode_count, mode);
> + enabled = regulator_get_enable(dev);
> +
> + printf("Regulator seq %d status:\n", dev->seq);
> + printf("%-*s %d\n%-*s %d (%s)\n%-*s %s\n",
> + LIMIT_INFO, " * value:", value,
> + LIMIT_INFO, " * mode:", mode, mode_name,
> + LIMIT_INFO, " * enabled:", enabled ? "true" : "false");
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +static int do_value(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + struct udevice *dev;
> + struct dm_regulator_info *info;
> + int value;
> + int force;
> + int ret;
> +
> + ret = get_curr_dev_and_info(&dev, &info);
> + if (ret)
> + return CMD_RET_FAILURE;
> +
> + if (argc == 1) {
> + value = regulator_get_value(dev);
> + if (value < 0)
> + return failed("get", info->name, "voltage", value);
> +
> + printf("%d uV\n", value);
> + return CMD_RET_SUCCESS;
> + }
> +
> + if (info->type == REGULATOR_TYPE_FIXED) {
> + printf("Fixed regulator value change not allowed.\n");
> + return CMD_RET_SUCCESS;
> + }
> +
> + if (argc == 3)
> + force = !strcmp("-f", argv[2]);
> + else
> + force = 0;
> +
> + value = simple_strtoul(argv[1], NULL, 0);
> + if ((value < info->min_uV || value > info->max_uV) && !force) {
> + printf("Value exceeds regulator constraint limits\n");
> + return CMD_RET_FAILURE;
> + }
> +
> + ret = regulator_set_value(dev, value);
> + if (ret)
> + return failed("set", info->name, "voltage value", ret);
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +static int do_current(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + struct udevice *dev;
> + struct dm_regulator_info *info;
> + int current;
> + int ret;
> +
> + ret = get_curr_dev_and_info(&dev, &info);
> + if (ret)
> + return CMD_RET_FAILURE;
> +
> + if (argc == 1) {
> + current = regulator_get_current(dev);
> + if (current < 0)
> + return failed("get", info->name, "current", current);
> +
> + printf("%d uA\n", current);
> + return CMD_RET_SUCCESS;
> + }
> +
> + if (info->type == REGULATOR_TYPE_FIXED) {
> + printf("Fixed regulator current change not allowed.\n");
> + return CMD_RET_SUCCESS;
> + }
> +
> + current = simple_strtoul(argv[1], NULL, 0);
> + if (current < info->min_uA || current > info->max_uA) {
> + printf("Current exceeds regulator constraint limits\n");
> + return CMD_RET_FAILURE;
> + }
> +
> + ret = regulator_set_current(dev, current);
> + if (ret)
> + return failed("set", info->name, "current value", ret);
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +static int do_mode(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + struct udevice *dev;
> + struct dm_regulator_info *info;
> + int new_mode;
> + int mode;
> + int ret;
> +
> + ret = get_curr_dev_and_info(&dev, &info);
> + if (ret)
> + return CMD_RET_FAILURE;
> +
> + if (info->type == REGULATOR_TYPE_FIXED) {
> + printf("Fixed regulator mode option not allowed.\n");
> + return CMD_RET_SUCCESS;
> + }
> +
> + if (argc == 1) {
> + mode = regulator_get_mode(dev);
> + if (mode < 0)
> + return failed("get", info->name, "mode", ret);
> +
> + printf("mode id: %d\n", mode);
> + return CMD_RET_SUCCESS;
> + }
The code above is the same for the above 2 functions also. Can you
move it to a common function? Something list
get_non_fixed_regulator()?
> +
> + new_mode = simple_strtoul(argv[1], NULL, 0);
> +
> + ret = regulator_set_mode(dev, new_mode);
> + if (ret)
> + return failed("set", info->name, "mode", ret);
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +static int do_enable(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + struct udevice *dev;
> + struct dm_regulator_info *info;
> + int ret;
> +
> + ret = get_curr_dev_and_info(&dev, &info);
> + if (ret)
> + return CMD_RET_FAILURE;
> +
> + ret = regulator_set_enable(dev, true);
> + if (ret)
> + return failed("enable", "regulator", info->name, ret);
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +static int do_disable(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + struct udevice *dev;
> + struct dm_regulator_info *info;
> + int ret;
> +
> + ret = get_curr_dev_and_info(&dev, &info);
> + if (ret)
> + return CMD_RET_FAILURE;
> +
> + ret = regulator_set_enable(dev, false);
> + if (ret)
> + return failed("disable", "regulator", info->name, ret);
> +
> + return CMD_RET_SUCCESS;
> +}
> +
> +static cmd_tbl_t subcmd[] = {
> + U_BOOT_CMD_MKENT(dev, 2, 1, do_dev, "", ""),
> + U_BOOT_CMD_MKENT(list, 1, 1, do_list, "", ""),
> + U_BOOT_CMD_MKENT(info, 2, 1, do_info, "", ""),
> + U_BOOT_CMD_MKENT(status, 2, 1, do_status, "", ""),
> + U_BOOT_CMD_MKENT(value, 3, 1, do_value, "", ""),
> + U_BOOT_CMD_MKENT(current, 3, 1, do_current, "", ""),
> + U_BOOT_CMD_MKENT(mode, 2, 1, do_mode, "", ""),
> + U_BOOT_CMD_MKENT(enable, 1, 1, do_enable, "", ""),
> + U_BOOT_CMD_MKENT(disable, 1, 1, do_disable, "", ""),
> +};
> +
> +static int do_regulator(cmd_tbl_t *cmdtp, int flag, int argc,
> + char * const argv[])
> +{
> + cmd_tbl_t *cmd;
> +
> + argc--;
> + argv++;
> +
> + cmd = find_cmd_tbl(argv[0], subcmd, ARRAY_SIZE(subcmd));
> + if (cmd == NULL || argc > cmd->maxargs)
> + return CMD_RET_USAGE;
> +
> + return cmd->cmd(cmdtp, flag, argc, argv);
> +}
> +
> +U_BOOT_CMD(regulator, CONFIG_SYS_MAXARGS, 1, do_regulator,
> + "uclass operations",
> + "list - list UCLASS regulator devices\n"
> + "regulator dev [id] - show or [set] operating regulator device\n"
> + "regulator [info] - print constraints info\n"
> + "regulator [status] - print operating status\n"
> + "regulator [value] [-f] - print/[set] voltage value [uV] (force)\n"
> + "regulator [current] - print/[set] current value [uA]\n"
> + "regulator [mode_id] - print/[set] operating mode id\n"
> + "regulator [enable] - enable the regulator output\n"
> + "regulator [disable] - disable the regulator output\n"
I think [info] should not be in brackets as it is not optional.
Similar with other ones.
Regards,
Simon
More information about the U-Boot
mailing list