[U-Boot] [PATCH v4 0/2] ARM: mx5: add support for USB armory board

[Andrej Rosano]

Hi Chris,

On Thu, Mar 26, 2015 at 02:53:58PM -0700, Chris Kuethe wrote:
> On Thu, Mar 26, 2015 at 4:49 AM,  <andrej at inversepath.com> wrote:
> > From: Andrej Rosano <andrej at inversepath.com>
> >
> > Hello,
> >
> > this series adds support for USB armory board. The patches are
> > prepared against imx tree as it uses the new arch/board approach.
> >
> > The first patch add introduces the arch/board approach for mx5,
> > as already done for mx6.
> 
> Yep, that works.
> 
> > The second patch adds basic support for USB armory board and
> > is an updated version (v4) with the modifications described bellow.
> 
> If I test this against HEAD as of
> f643d9294f45487f22e8f33d6572530f17eff4e9, I get an error reated to
> IMX_CONFIG.

Please note that the patch is prepared against imx tree and not the
mainline one, where the "arch/board approach" is not yet merged.

Cheers,
Andrej

> 
> "board/inversepath/usbarmory/Kconfig:3:warning: config symbol defined
> without type"
> 
> Here's a diff to fix that
> 
> diff --git a/board/inversepath/usbarmory/Kconfig
> b/board/inversepath/usbarmory/Kconfig
> index c2cd544..4776b1d 100644
> --- a/board/inversepath/usbarmory/Kconfig
> +++ b/board/inversepath/usbarmory/Kconfig
> @@ -1,8 +1,5 @@
>  if TARGET_USBARMORY
> 
> -config IMX_CONFIG
> -    default "board/inversepath/usbarmory/imximage.cfg"
> -
>  config SYS_BOARD
>      default "usbarmory"
> 
> diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig
> index 10bdd9e..237b1ca 100644
> --- a/configs/usbarmory_defconfig
> +++ b/configs/usbarmory_defconfig
> @@ -1,3 +1,4 @@
>  CONFIG_ARM=y
>  CONFIG_ARCH_MX5=y
>  CONFIG_TARGET_USBARMORY=y
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/inversepath/usbarmory/imximage.cfg"
> 
> 
> > Changes for v4:
> >  - Remove ifdef for CONFIG_FSL_ESDHC as it must always be present
> >  - Remove explicit GPIO input setup (all GPIO are input after reset)
> >  - Remove dummy board_late_init() and CONFIG_BOARD_LATE_INIT
> >  - Remove CONFIG_BOOTARGS
> >  - Fix compiling errors due to config_distro_bootcmd.h inclusion position
> 
> Tested-by: Chris Kuethe <chris.kuethe at gmail.com>
> 
> > Changes for v3:
> >  - Add config_distro support
> >
> > Changes for v2:
> >  - Fix double print_cpuinfo() call
> >  - Fix CONFIG_BOOTCOMMAND typo
> >  - Fix CONFIG_SYS_FSL_ESDHC_NUM to 1
> >
> > Andrej Rosano (2):
> >   ARM: mx5: move to a standard arch/board approach
> >   ARM: mx5: add support for USB armory board
> >
> >
> > Andrej Rosano (2):
> >   ARM: mx5: move to a standard arch/board approach
> >   ARM: mx5: add support for USB armory board
> 
> 
> 
> -- 
> GDB has a 'break' feature; why doesn't it have 'fix' too?

--
Andrej Rosano                                           Inverse Path Srl
<andrej at inversepath.com>                      http://www.inversepath.com

0x01939B21            5BB8 574E 68E8 D841 E18F  D5E9 CEAD E0CF 0193 9B21