[U-Boot] [PATCH 17/19] imx: ventana: add pmic_setup to SPL

[Tim Harvey]

We need to do any PMIC setup in the SPL if we are to bypass U-Boot for
falcon mode.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 board/gateworks/gw_ventana/gw_ventana_spl.c | 3 +++
 include/configs/gw_ventana.h                | 1 +
 2 files changed, 4 insertions(+)

diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c
index cde04cf..1873d99 100644
--- a/board/gateworks/gw_ventana/gw_ventana_spl.c
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -551,6 +551,9 @@ void spl_board_init(void)
 	default:
 		puts("Unknown boot device\n");
 	}
+
+	/* PMIC init */
+	setup_pmic();
 }
 
 void reset_cpu(ulong addr)
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index c61fbb9..ccf01e2 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -13,6 +13,7 @@
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
 /* Location on MMC to read U-Boot from */
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* 69KB */
 /* Location in NAND to read U-Boot from */
-- 
1.9.1