[U-Boot] [PATCH 10/19] imx: ventana: fix pcie reset for GW522x

[Tim Harvey]

On Mon, May 11, 2015 at 12:59 AM, Stefano Babic <sbabic at denx.de> wrote:
> Hi Tim,
>
> On 09/05/2015 03:28, Tim Harvey wrote:
>> The re-assignment of pcie_rst gpio for GW522x needs to occur earlier, before
>> the PCI subsystem calls the toggle funciton.
>>
>> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
>> ---
>>  board/gateworks/gw_ventana/gw_ventana.c | 8 ++++----
>>  1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
>> index 554cd84..8cfc1f2 100644
>> --- a/board/gateworks/gw_ventana/gw_ventana.c
>> +++ b/board/gateworks/gw_ventana/gw_ventana.c
>> @@ -1184,10 +1184,6 @@ static void setup_board_gpio(int board)
>>       }
>>
>>  #if !defined(CONFIG_CMD_PCI)
>> -     /* GW522x Uses GPIO3_IO23 for PCIE_RST# */
>> -     if (board_type == GW52xx && info->model[4] == '2')
>> -             gpio_cfg[board].pcie_rst = IMX_GPIO_NR(3, 23);
>> -
>
> This code runs now without #ifdef protection. Is it desired ?

Stefano,

Yes - I did intend to remove the #ifdef protection.

Regards,

Tim