[U-Boot] [PATCH 08/19] imx: ventana: config: use MMC SPL RAW support

[Tim Harvey]

On Fri, May 8, 2015 at 6:36 PM, Fabio Estevam <festevam at gmail.com> wrote:
> Hi Tim,
>
> On Fri, May 8, 2015 at 10:28 PM, Tim Harvey <tharvey at gateworks.com> wrote:
>> Switch to MMC RAW support for SPL. We will place the uboot.img at 69KB.
>>
>> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
>> ---
>>  include/configs/gw_ventana.h | 6 ++----
>>  1 file changed, 2 insertions(+), 4 deletions(-)
>>
>> diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
>> index 63af20c..e18e262 100644
>> --- a/include/configs/gw_ventana.h
>> +++ b/include/configs/gw_ventana.h
>> @@ -11,10 +11,8 @@
>>  #define CONFIG_SPL_BOARD_INIT
>>  #define CONFIG_SPL_NAND_SUPPORT
>>  #define CONFIG_SPL_MMC_SUPPORT
>> -#define CONFIG_SPL_FAT_SUPPORT
>> -/*
>> -#define CONFIG_SPL_SATA_SUPPORT
>> -*/
>> +/* Location on MMC to read U-Boot from */
>> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* 69KB */
>
> No need to define this as it is the default from imx6_spl.h

Fabio,

Thanks for pointing that out - I'll remove it.

Tim