[U-Boot] [PATCH 02/11] dm: gpio: vf610: Add GPIO driver support
Bhuvanchandra DV
bhuvanchandra.dv at toradex.com
Mon May 18 15:06:20 CEST 2015
Add GPIO driver support to Freescale VF610
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv at toradex.com>
---
arch/arm/imx-common/iomux-v3.c | 26 +++++
arch/arm/include/asm/arch-vf610/gpio.h | 29 +++++
arch/arm/include/asm/arch-vf610/imx-regs.h | 5 +
arch/arm/include/asm/imx-common/iomux-v3.h | 6 +
drivers/gpio/Kconfig | 7 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/vybrid_gpio.c | 169 +++++++++++++++++++++++++++++
7 files changed, 243 insertions(+)
create mode 100644 arch/arm/include/asm/arch-vf610/gpio.h
create mode 100644 drivers/gpio/vybrid_gpio.c
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index e88e6e2..7fb23dd 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -92,3 +92,29 @@ void imx_iomux_set_gpr_register(int group, int start_bit,
reg |= (value << start_bit);
writel(reg, base + group * 4);
}
+
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+ unsigned int direction)
+{
+ u32 reg;
+ /*
+ * Only on Vybrid the input/output buffer enable flags
+ * are part of the shared mux/conf register.
+ */
+ reg = readl(base + (gpio << 2));
+
+ if (direction)
+ reg |= 0x2;
+ else
+ reg &= ~0x2;
+
+ writel(reg, base + (gpio << 2));
+}
+
+void imx_iomux_gpio_get_function(unsigned int gpio, u32 *gpio_state)
+{
+ *gpio_state = readl(base + (gpio << 2)) &
+ ((0X07 << PAD_MUX_MODE_SHIFT) | PAD_CTL_OBE_IBE_ENABLE);
+}
+#endif
diff --git a/arch/arm/include/asm/arch-vf610/gpio.h b/arch/arm/include/asm/arch-vf610/gpio.h
new file mode 100644
index 0000000..622b8f0
--- /dev/null
+++ b/arch/arm/include/asm/arch-vf610/gpio.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2015
+ * Bhuvanchandra DV, Toradex, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_VF610_GPIO_H
+#define __ASM_ARCH_VF610_GPIO_H
+
+#define VYBRID_GPIO_COUNT 32
+#define VF610_GPIO_DIRECTION_IN 0x0
+#define VF610_GPIO_DIRECTION_OUT 0x1
+
+/* GPIO registers */
+struct vybrid_gpio_regs {
+ u32 gpio_pdor;
+ u32 gpio_psor;
+ u32 gpio_pcor;
+ u32 gpio_ptor;
+ u32 gpio_pdir;
+};
+
+struct vybrid_gpio_platdata {
+ unsigned int chip;
+ u32 base;
+ const char *port_name;
+};
+#endif /* __ASM_ARCH_VF610_GPIO_H */
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index a7d765a..5a37193 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -81,6 +81,11 @@
#define VREG_DIG_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006D000)
#define SRC_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006E000)
#define CMU_BASE_ADDR (AIPS0_BASE_ADDR + 0x0006F000)
+#define GPIO0_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF000)
+#define GPIO1_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF040)
+#define GPIO2_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF080)
+#define GPIO3_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF0C0)
+#define GPIO4_BASE_ADDR (AIPS0_BASE_ADDR + 0x000FF100)
/* AIPS 1 */
#define OCOTP_BASE_ADDR (AIPS1_BASE_ADDR + 0x00025000)
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index e0a49be..2581019 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -187,6 +187,12 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
*/
void imx_iomux_set_gpr_register(int group, int start_bit,
int num_bits, int value);
+#ifdef CONFIG_IOMUX_SHARE_CONF_REG
+void imx_iomux_gpio_set_direction(unsigned int gpio,
+ unsigned int direction);
+void imx_iomux_gpio_get_function(unsigned int gpio,
+ u32 *gpio_state);
+#endif
/* macros for declaring and using pinmux array */
#if defined(CONFIG_MX6QDL)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 0840a30..0c43777 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -35,3 +35,10 @@ config SANDBOX_GPIO_COUNT
are specified using the device tree. But you can also have a number
of 'anonymous' GPIOs that do not belong to any device or bank.
Select a suitable value depending on your needs.
+
+config VYBRID_GPIO
+ bool "Vybrid GPIO driver"
+ depends on DM
+ default n
+ help
+ Say yes here to support Vybrid vf610 GPIOs.
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ba9efe8..5864850 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -45,3 +45,4 @@ obj-$(CONFIG_SUNXI_GPIO) += sunxi_gpio.o
obj-$(CONFIG_LPC32XX_GPIO) += lpc32xx_gpio.o
obj-$(CONFIG_STM32_GPIO) += stm32_gpio.o
obj-$(CONFIG_ZYNQ_GPIO) += zynq_gpio.o
+obj-$(CONFIG_VYBRID_GPIO) += vybrid_gpio.o
diff --git a/drivers/gpio/vybrid_gpio.c b/drivers/gpio/vybrid_gpio.c
new file mode 100644
index 0000000..6eaf0a9
--- /dev/null
+++ b/drivers/gpio/vybrid_gpio.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2015
+ * Bhuvanchandra DV, Toradex, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/io.h>
+#include <malloc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct vybrid_gpios {
+ unsigned int chip;
+ struct vybrid_gpio_regs *reg;
+};
+
+static int vybrid_gpio_direction_input(struct udevice *dev, unsigned gpio)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+ gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+ imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_IN);
+
+ return 0;
+}
+
+static int vybrid_gpio_direction_output(struct udevice *dev, unsigned gpio,
+ int value)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+ gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+ gpio_set_value(gpio, value);
+ imx_iomux_gpio_set_direction(gpio, VF610_GPIO_DIRECTION_OUT);
+
+ return 0;
+}
+
+static int vybrid_gpio_get_value(struct udevice *dev, unsigned gpio)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+
+ return ((readl(&gpios->reg->gpio_pdir) & (1 << gpio))) ? 1 : 0;
+}
+
+static int vybrid_gpio_set_value(struct udevice *dev, unsigned gpio,
+ int value)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+ if (value)
+ writel((1 << gpio), &gpios->reg->gpio_psor);
+ else
+ writel((1 << gpio), &gpios->reg->gpio_pcor);
+
+ return 0;
+}
+
+static int vybrid_gpio_get_function(struct udevice *dev, unsigned gpio)
+{
+ const struct vybrid_gpios *gpios = dev_get_priv(dev);
+ u32 g_state = 0;
+
+ gpio = gpio + (gpios->chip * VYBRID_GPIO_COUNT);
+
+ imx_iomux_gpio_get_function(gpio, &g_state);
+
+ if (((g_state & (0x07 << PAD_MUX_MODE_SHIFT)) >> PAD_MUX_MODE_SHIFT) > 0)
+ return GPIOF_FUNC;
+ if (g_state & PAD_CTL_OBE_ENABLE)
+ return GPIOF_OUTPUT;
+ if (g_state & PAD_CTL_IBE_ENABLE)
+ return GPIOF_INPUT;
+ if (!(g_state & PAD_CTL_OBE_IBE_ENABLE))
+ return GPIOF_UNUSED;
+
+ return GPIOF_UNKNOWN;
+}
+
+static const struct dm_gpio_ops gpio_vybrid_ops = {
+ .direction_input = vybrid_gpio_direction_input,
+ .direction_output = vybrid_gpio_direction_output,
+ .get_value = vybrid_gpio_get_value,
+ .set_value = vybrid_gpio_set_value,
+ .get_function = vybrid_gpio_get_function,
+};
+
+static int vybrid_gpio_probe(struct udevice *dev)
+{
+ struct vybrid_gpios *gpios = dev_get_priv(dev);
+ struct vybrid_gpio_platdata *plat = dev_get_platdata(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ uc_priv->bank_name = plat->port_name;
+ uc_priv->gpio_count = VYBRID_GPIO_COUNT;
+ gpios->reg = (struct vybrid_gpio_regs *)plat->base;
+ gpios->chip = plat->chip;
+
+ return 0;
+}
+
+static int vybrid_gpio_bind(struct udevice *dev)
+{
+ struct vybrid_gpio_platdata *plat = dev->platdata;
+ fdt_addr_t base_addr;
+
+ if (plat)
+ return 0;
+
+ base_addr = dev_get_addr(dev);
+ if (base_addr == FDT_ADDR_T_NONE)
+ return -ENODEV;
+
+ /*
+ * TODO:
+ * When every board is converted to driver model and DT is
+ * supported, this can be done by auto-alloc feature, but
+ * not using calloc to alloc memory for platdata.
+ */
+ plat = calloc(1, sizeof(*plat));
+ if (!plat)
+ return -ENOMEM;
+
+ plat->base = base_addr;
+ plat->chip = dev->req_seq;
+ plat->port_name = fdt_get_name(gd->fdt_blob, dev->of_offset, NULL);
+ dev->platdata = plat;
+
+ return 0;
+}
+
+#ifndef CONFIG_OF_CONTROL
+static const struct vybrid_gpio_platdata vybrid_gpio[] = {
+ {0, GPIO0_BASE_ADDR, "GPIO0 "},
+ {1, GPIO1_BASE_ADDR, "GPIO1 "},
+ {2, GPIO2_BASE_ADDR, "GPIO2 "},
+ {3, GPIO3_BASE_ADDR, "GPIO3 "},
+ {4, GPIO4_BASE_ADDR, "GPIO4 "},
+};
+
+U_BOOT_DEVICES(vybrid_gpio) = {
+ { "gpio_vybrid", &vybrid_gpio[0] },
+ { "gpio_vybrid", &vybrid_gpio[1] },
+ { "gpio_vybrid", &vybrid_gpio[2] },
+ { "gpio_vybrid", &vybrid_gpio[3] },
+ { "gpio_vybrid", &vybrid_gpio[4] },
+};
+#endif
+
+static const struct udevice_id vybrid_gpio_ids[] = {
+ { .compatible = "fsl,vf610-gpio" },
+ { }
+};
+
+U_BOOT_DRIVER(gpio_vybrid) = {
+ .name = "gpio_vybrid",
+ .id = UCLASS_GPIO,
+ .ops = &gpio_vybrid_ops,
+ .probe = vybrid_gpio_probe,
+ .priv_auto_alloc_size = sizeof(struct vybrid_gpios),
+ .of_match = vybrid_gpio_ids,
+ .bind = vybrid_gpio_bind,
+};
--
2.1.0
More information about the U-Boot
mailing list