[U-Boot] [PATCH 00/11] Add GPIO driver for Freescale Vybrid platform
Stefano Babic
sbabic at denx.de
Tue May 26 13:27:14 CEST 2015
Hi,
On 24/05/2015 21:34, Bhuvanchandra DV wrote:
> Hello Stefano,
>
> On 05/18/2015 06:36 PM, Bhuvanchandra DV wrote:
>> This patch-set adds GPIO driver, DSPI and device tree support
>> for Freescale Vybrid platform and Toradex Colibri Vybrid VF50,
>> VF61 modules.
>>
>> Following cases are tested with Vybrid GPIO driver:
>> - with DM, without DT
>> - with DM and DT
>> Both the above cases were tested on Toradex Colibri Vybrid VF50, VF61
>> modules and both works fine.
>>
>> - The patchset is based and tested on the latest master branch.
>>
>> Bhuvanchandra DV (9):
>> dm: gpio: uclass: Add flag to control sequence numbering
>> dm: gpio: vf610: Add GPIO driver support
>> colibri_vf: Add pinmux entries for GPIOs
>> colibri_vf: Enable GPIO support
>> arm: vf610: Add clock support for DSPI
>> arm: vf610: Add iomux support for DSPI
>> vf610: dts: Add device tree support
>> colibri-vf: Enable SPI support
>> colibri_vf: Add separate defconfig for device tree support
>>
>> Sanchayan Maity (2):
>> usb: ehci-vf: Add weak function for board specific initialisation
>> colibri_vf: Enable board specific USB initialisation for USB pen gpio
>
> Submitted these patches in single series, as few of the patches are
> interdependent, thought it would be easy to keep them in same series.
>
> Shall we split this patchset as per the custodian maintainers to pick?
>
> Patchset 1: Add GPIO driver support for Freescale Vybrid platform,
> enable support for GPIO support on Toradex Colibri VF50, VF61 modules.
>
> Patchset 2: Add device tree support for Freescale Vybrid Platform,
> Toradex Colibri VF50, VF61 modules.
>
> Patchset 3: Add DSPI support for Toradex Colibri VF50, VF61 modules.
>
> Patchset 4: Add weak function for board specific USB initialization
> for Freescale Vybrid platform.
Generally, if a maintainer acks a patch, the patch could then be applied
into another tree if this makes sense and avoid to introduce breakage,
maybe in both trees. You patchset is related to u-boot-imx with
exception for the USB part, but Marek has already acked it. I will check
you patches soon, but I think it is ok if the whole patchset flows into
u-boot-imx.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list