[U-Boot] [UBOOT PATCH v2 1/2] zynqmp: nand: Add Nand driver support for zynqmp

[Scott Wood]

On Fri, 2015-11-06 at 16:52 +0530, Siva Durga Prasad Paladugu wrote:
> Add nand driver support for zynqmp. The Nand
> controller used in ZynqMP is Arasan Nand Flash
> controller.
> 
> Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
> ---
> Changes from v1:
> - Newly added in series
> ---
>  arch/arm/cpu/armv8/zynqmp/Kconfig           | 3 +++
>  arch/arm/include/asm/arch-zynqmp/hardware.h | 2 ++
>  configs/xilinx_zynqmp_ep_defconfig          | 1 +
>  include/configs/xilinx_zynqmp.h             | 9 +++++++++
>  4 files changed, 15 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig 
> b/arch/arm/cpu/armv8/zynqmp/Kconfig
> index e5a4fdd..161954f 100644
> --- a/arch/arm/cpu/armv8/zynqmp/Kconfig
> +++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
> @@ -27,4 +27,7 @@ config SECURE_IOU
>  config ZYNQMP_USB
>       bool "Configure ZynqMP USB"
>  
> +config NAND_ARASAN
> +     bool "Configure Arasan Nand"
> +
>  endif

This should go in drivers/mtd/nand/Kconfig.

-Scott