[U-Boot] [UBOOT PATCH v2 1/2] zynqmp: nand: Add Nand driver support for zynqmp

[Siva Durga Prasad Paladugu]

Hi Scott,

> -----Original Message-----
> From: Scott Wood [mailto:scottwood at freescale.com]
> Sent: Friday, November 06, 2015 10:33 PM
> To: Siva Durga Prasad Paladugu
> Cc: u-boot at lists.denx.de; Michal Simek; Siva Durga Prasad Paladugu
> Subject: Re: [UBOOT PATCH v2 1/2] zynqmp: nand: Add Nand driver support
> for zynqmp
> 
> On Fri, 2015-11-06 at 16:52 +0530, Siva Durga Prasad Paladugu wrote:
> > Add nand driver support for zynqmp. The Nand controller used in ZynqMP
> > is Arasan Nand Flash controller.
> >
> > Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
> > ---
> > Changes from v1:
> > - Newly added in series
> > ---
> >  arch/arm/cpu/armv8/zynqmp/Kconfig           | 3 +++
> >  arch/arm/include/asm/arch-zynqmp/hardware.h | 2 ++
> >  configs/xilinx_zynqmp_ep_defconfig          | 1 +
> >  include/configs/xilinx_zynqmp.h             | 9 +++++++++
> >  4 files changed, 15 insertions(+)
> >
> > diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig
> > b/arch/arm/cpu/armv8/zynqmp/Kconfig
> > index e5a4fdd..161954f 100644
> > --- a/arch/arm/cpu/armv8/zynqmp/Kconfig
> > +++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
> > @@ -27,4 +27,7 @@ config SECURE_IOU
> >  config ZYNQMP_USB
> >       bool "Configure ZynqMP USB"
> >
> > +config NAND_ARASAN
> > +     bool "Configure Arasan Nand"
> > +
> >  endif
> 
> This should go in drivers/mtd/nand/Kconfig.

Ok, I will consider it in V2. 
Do you have any further comments on 2nd patch in the series? If not, please take it up.

Regards,
Siva

> 
> -Scott