[U-Boot] mxs: HAB experiments

[Florian Achleitner]

Hi,

On Wednesday, November 18, 2015 09:55:12 AM Marek Vasut wrote:
> On Tuesday, November 17, 2015 at 02:16:06 PM, Florian Achleitner wrote:
> > Hi Marek,
> 
> Hi,
> 
> > thanks for you contributions to support mxs HAB v4 in u-boot. I'm
> > currently
> > experimenting with HAB on my imx28 board. I think I put everything
> > together
> > quite well.
> >
> > 
> >
> > But examining the HAB event log I see two successful authentications for
> > the u-boot.bin and the IVT followed by a FAILURE with "unsupported
> > command" in the "CSF Context".  It is the same for both the SPL and the
> > main u-boot. Did you see something similar? It suggests a wrong command in
> > the CSF file, but I think there is not a lot that can be wrong in the CSF
> > input file for the cst tool. But probably the cst output is different
> > between versions? I use version BLN_CST_MAIN_02.03.00.
> >
> > 
> >
> > I use u-boot's mkimage, which can generate a signed boot stream, together
> > with your hand-crafted IVT generator in the Makefile.
> 
> Can you share your CSF files (make sure to blank out the private material) ?

The CSF follows. It is the same for the spl and the main u-boot. 

Anyways, I currently suspect the cst tool in its current version (2.3.1) to 
produce binaries that are incompatible with the mx28 HAB Rom. However, I 
couldn't find an older version of the cst yet, so I can't try it at the 
moment.

Thanks!
Florian

[Header]
Version = 4.0
Hash Algorithm = sha256
Engine Configuration = 0
Certificate Format = X509
Signature Format = CMS
Engine = DCP
	
[Install SRK]
File = "$SRK_1_2_table.bin"
Source index = 0
	
[Install CSFK]
File = "$CSF1_1_sha256_2048_65537_v3_usr_crt.pem"
	
[Authenticate CSF]

[Install Key]
Verification index = 0
Target index = 2
File = "$IMG1_1_sha256_2048_65537_v3_usr_crt.pem"

[Authenticate Data]
Verification index = 2