[U-Boot] MX6ULEVK does not boot

[Stefano Babic]

Hi Fabio,

On 19/11/2015 17:13, Fabio Estevam wrote:
> On Thu, Nov 19, 2015 at 1:58 PM, Fabio Estevam <festevam at gmail.com> wrote:
>> Hi Peng,
>>
>> Just noticed that mx6ulevk is not booting with latest U-boot:
>>
>> U-Boot SPL 2016.01-rc1-00078-g736d174 (Nov 19 2015 - 13:45:19)
>> Trying to boot from MMC
>> spl: mmc block read error
>> SPL: failed to boot from all boot devices
>> ### ERROR ### Please RESET the board ###
>>
>> I haven't had a chance to investigate/debug this yet.
> 
> Looks like I cannot boot using my SanDisk micro SD card. I changed the
> SD card and now it boots.

I can confirm you this weirdness. It depends on the SD Card, I have seen
the same on a iMX6 Dual. It does not boot with industrial card (Pretec,
1Gb), no problems with "HC" cards of any size (Toshiba, Sandisk, Hama,..).

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================