[U-Boot] Zynq: Unable to boot from MMC

[Jagan Teki]

Hi Moritz,

On 23 November 2015 at 01:15, Moritz Fischer <moritz.fischer at ettus.com> wrote:
> Hi Jagan,
>
>
>
> On Sun, Nov 22, 2015 at 6:25 AM, Jagan Teki <jteki at openedev.com> wrote:
>> Hi Michal,
>>
>> I'm unable to boot the zynq board from MMC, here is my trails:
>> 1. zynq-boot-bin.py -o boot.bin -u spl/u-boot-spl-dtb.bin
>> copied boot.bin and u-boot-dtb.img on to sd card
>>
>
> try reverting 9ac4fc82071ce346e3885118242ff45d22f69b82. I ran into
> this friday and was pointed to that
> by a colleague.

Still the same issue, here is the reverted commit

    Revert "board_init: Change the logic to setup malloc_base"

    This reverts commit 9ac4fc82071ce346e3885118242ff45d22f69b82.


-- 
Jagan | openedev.