[U-Boot] Zynq: Unable to boot from MMC

[Michal Simek]

On 23.11.2015 11:27, Michal Simek wrote:
> Hi Jagan,
> 
> On 23.11.2015 10:20, Jagan Teki wrote:
>> Hi Moritz,
>>
>> On 23 November 2015 at 01:15, Moritz Fischer <moritz.fischer at ettus.com> wrote:
>>> Hi Jagan,
>>>
>>>
>>>
>>> On Sun, Nov 22, 2015 at 6:25 AM, Jagan Teki <jteki at openedev.com> wrote:
>>>> Hi Michal,
>>>>
>>>> I'm unable to boot the zynq board from MMC, here is my trails:
>>>> 1. zynq-boot-bin.py -o boot.bin -u spl/u-boot-spl-dtb.bin
>>>> copied boot.bin and u-boot-dtb.img on to sd card
>>>>
>>>
>>> try reverting 9ac4fc82071ce346e3885118242ff45d22f69b82. I ran into
>>> this friday and was pointed to that
>>> by a colleague.
>>
>> Still the same issue, here is the reverted commit
>>
>>     Revert "board_init: Change the logic to setup malloc_base"
>>
>>     This reverts commit 9ac4fc82071ce346e3885118242ff45d22f69b82.
>>
>>
> 
> I have reported problem with SPL in my pull request to Tom last week.
> I have tested current HEAD. When you revert that sha1 reported above it
> is just working directly in MMC bootmode on zc702.
> 
> On Friday Philip tried the same on zedboard and it was working fine for
> him too.
> 
> I still don't know exactly where the problem is because I haven't spent
> on it any time - just bisecting commit ID which was the first broken one.

Look at this patch I have just sent.
ARM: zynq: Fix location of stack and malloc areas

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151123/02b655fa/attachment.sig>