[U-Boot] mxs: HAB: current CST broken

[Marek Vasut]

On Thursday, November 26, 2015 at 01:51:17 PM, Florian Achleitner wrote:
> On Thursday, November 26, 2015 12:06:42 PM Marek Vasut wrote:
> > On Thursday, November 26, 2015 at 10:24:50 AM, Florian Achleitner wrote:
> > > Hi,
> > 
> > Hi,
> > 
> > > for everybody's information:
> > > 
> > > On Wednesday, November 18, 2015 11:01:03 AM Marek Vasut wrote:
> > > > On Wednesday, November 18, 2015 at 10:57:13 AM, Florian Achleitner
> 
> wrote:
> > > > > On Wednesday, November 18, 2015 09:55:12 AM Marek Vasut wrote:
> > > > > 
> > > > > [..]
> > > > > Anyways, I currently suspect the cst tool in its current version
> > > > > (2.3.1) to
> > > > > produce binaries that are incompatible with the mx28 HAB Rom.
> > > > > However, I couldn't find an older version of the cst yet, so I
> > > > > can't try it at the moment.
> > > > 
> > > > [...]
> > > > 
> > > > I am using BLN_CST_MAIN_02.00.00 btw.
> > > 
> > > I eventually got version BLN_CST_MAIN_02.00.00 from freescale support,
> > > and it works nicely with the i.mx28 HAB.
> > > 
> > > Thus, I'm quite sure that the current version BLN_CST_MAIN_02.03.00 is
> > > simply broken at least for i.mx28.
> > 
> > Thanks for the heads up! Would it be possible for you to check what's the
> > problem and submit a patch to make both versions work please?
> 
> I guess, no. I think there is nothing to be done on u-boot's side. From the
> outside, the cst still looks the same, all inputs are the same. And this
> tool is known to be closed-source. I can only compare the output. The
> binary it produces differs significantly between the two versions. This
> must bei fixed by freescale in the cst. Their support promised to forward
> the issue.

Please keep an eye on them at least. Thanks!

Best regards,
Marek Vasut