[U-Boot] [PATCH V2 11/11] exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4.
Simon Glass
sjg at chromium.org
Sat Oct 3 16:28:22 CEST 2015
Hi Przemyslaw,
On 21 September 2015 at 13:26, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
> This commit adds additional file with implementation of board
> detection code for Odroid-XU3/XU4.
>
> The detection depends on compatible found in fdt:
> - "samsung,exynos5" - uses Exynos5 generic code
> - "samsung,odroidxu3" - try detect XU3 revision
>
> There are few revisions of Odroid XU3/XU4, each can be detected
> by checking the value of channel 9 of built-in ADC:
> Rev ADC Board
> 0.1 0 XU3 0.1
> 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT
> 0.3 1280 XU4 0.1
>
> The detection code depends on the ADC+10% value.
>
> Implementation of functions:
> - set_board_type() - read ADC and set type
> - get_board_rev() - returns board revision: 1..3
> - get_board_type() - returns board type string
>
> Additional functions with return values of bool:
> - board_is_generic() - true if found compatible "samsung,exynos5"
> but not "samsung,odroidxu3"
> - board_is_odroidxu3() - true if found compatible "samsung,odroidxu3"
> and one of XU3 revision.
> - board_is_odroidxu4() - true if found compatible "samsung,odroidxu3"
> and XU4 revision.
>
> After I2C controller init, the get_board_type() can check
> if the XU3 board is a "Lite" variant, by probing chip
> 0x40 on I2C0 (INA231 - exists only on non-lite).
> This is useful for setting fdt file name at misc_init_r().
>
> Enabled configs:
> - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> - CONFIG_ODROID_REV_AIN
> - CONFIG_REVISION_TAG
> - CONFIG_BOARD_TYPES
>
> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
> ---
> Changes V2:
> - move detection code from exynos5-dt.c to exynos5-dt-types.c
> - add header with board type function declarations
> - check for compatible before do the detection
> - update the ADC max values with 20% tolerance
> - fix XU4 adc value, related to mistake from table in XU4 schematic
> - return "Not supported" for XU4 when calls one of:
> --dfu_get_alt_boot()
> --dfu_get_alt_system()
> - extend ${dfu_alt_system} by strings:
> -- 'exynos5422-odroidxu3-lite.dtb'
> -- 'exynos5422-odroidxu4.dtb' - allows prepare card on XU3
> ---
> board/samsung/common/Makefile | 5 +-
> board/samsung/common/exynos5-dt-types.c | 196 ++++++++++++++++++++++++++++++++
> board/samsung/common/exynos5-dt.c | 12 ++
> configs/odroid-xu3_defconfig | 2 +
> include/configs/odroid_xu3.h | 12 ++
> include/samsung/exynos5-dt-types.h | 27 +++++
> 6 files changed, 253 insertions(+), 1 deletion(-)
> create mode 100644 board/samsung/common/exynos5-dt-types.c
> create mode 100644 include/samsung/exynos5-dt-types.h
Reviewed-by: Simon Glass <sjg at chromium.org>
See nits below.
>
> diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile
> index 6cbd906..ef1a8f3 100644
> --- a/board/samsung/common/Makefile
> +++ b/board/samsung/common/Makefile
> @@ -11,5 +11,8 @@ obj-$(CONFIG_MISC_COMMON) += misc.o
>
> ifndef CONFIG_SPL_BUILD
> obj-$(CONFIG_BOARD_COMMON) += board.o
> -obj-$(CONFIG_EXYNOS5_DT) += exynos5-dt.o
> +ifdef CONFIG_EXYNOS5_DT
> +obj-y += exynos5-dt.o
> +obj-$(CONFIG_BOARD_TYPES) += exynos5-dt-types.o
> +endif
> endif
> diff --git a/board/samsung/common/exynos5-dt-types.c b/board/samsung/common/exynos5-dt-types.c
> new file mode 100644
> index 0000000..1364e98
> --- /dev/null
> +++ b/board/samsung/common/exynos5-dt-types.c
> @@ -0,0 +1,196 @@
> +/*
> + * Copyright (C) 2015 Samsung Electronics
> + * Przemyslaw Marczak <p.marczak at samsung.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <adc.h>
> +#include <common.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <fdtdec.h>
> +#include <power/pmic.h>
> +#include <power/regulator.h>
> +#include <power/s2mps11.h>
> +#include <samsung/exynos5-dt-types.h>
> +#include <samsung/misc.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static const struct udevice_id board_ids[] = {
> + { .compatible = "samsung,odroidxu3", .data = EXYNOS5_BOARD_ODROID_XU3 },
> + { .compatible = "samsung,exynos5", .data = EXYNOS5_BOARD_GENERIC },
> + { },
> +};
> +
> +/**
> + * Odroix XU3/4 board revisions:
> + * Rev ADCmax Board
> + * 0.1 0 XU3 0.1
> + * 0.2 410 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231)
> + * 0.3 1408 XU4 0.1
> + * Use +10 % for ADC value tolerance.
> + */
> +struct odroid_rev_info odroid_info[] = {
> + { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" },
> + { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 410, "xu3" },
> + { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1408, "xu4" },
> + { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" },
> +};
> +
> +static unsigned int odroid_get_rev(void)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
> + if (odroid_info[i].board_type == gd->board_type)
> + return odroid_info[i].board_rev;
> + }
> +
> + return 0;
> +}
> +
> +static int odroid_get_board_type(void)
> +{
> + unsigned int adcval;
> + int ret, i;
> +
> + ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN, &adcval);
> + if (ret)
> + goto rev_default;
> +
> + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
> + /* ADC tolerance: +20 % */
> + if (adcval < odroid_info[i].adc_val)
> + return odroid_info[i].board_type;
> + }
> +
> +rev_default:
> + return EXYNOS5_BOARD_ODROID_XU3;
> +}
> +
> +/**
> + * odroid_get_type_str - returns pointer to one of the board type string.
> + * Board types: "xu3", "xu3-lite", "xu4". However the "xu3lite" can be
> + * detected only when the i2c controller is ready to use. Fortunately,
> + * XU3 and XU3L are compatible, and the information about board lite
> + * revision is needed before booting the linux, to set proper environment
> + * variable: $fdtfile.
> + */
> +static const char *odroid_get_type_str(void)
> +{
> + const char *type_xu3l = "xu3-lite";
> + struct udevice *dev, *chip;
> + int i, ret;
> +
> + if (gd->board_type != EXYNOS5_BOARD_ODROID_XU3_REV02)
> + goto exit;
> +
> + ret = pmic_get("s2mps11", &dev);
> + if (ret)
> + goto exit;
> +
> + /* Enable LDO26: 3.0V */
> + ret = pmic_reg_write(dev, S2MPS11_REG_L26CTRL,
> + S2MPS11_LDO26_ENABLE);
> + if (ret)
> + goto exit;
> +
> + /* Check XU3Lite by probe INA231 I2C0:0x40 */
> + ret = uclass_get_device(UCLASS_I2C, 0, &dev);
Yikes! What happens if you want to add a driver for this?
> + if (ret)
> + goto exit;
> +
> + ret = dm_i2c_probe(dev, 0x40, 0x0, &chip);
> + if (ret)
> + return type_xu3l;
> +
> +exit:
> + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
> + if (odroid_info[i].board_type == gd->board_type)
> + return odroid_info[i].name;
> + }
> +
> + return NULL;
> +}
> +
> +bool board_is_odroidxu3(void)
> +{
> + if (gd->board_type >= EXYNOS5_BOARD_ODROID_XU3 &&
> + gd->board_type <= EXYNOS5_BOARD_ODROID_XU3_REV02)
> + return true;
> +
> + return false;
> +}
> +
> +bool board_is_odroidxu4(void)
> +{
> + if (gd->board_type == EXYNOS5_BOARD_ODROID_XU4_REV01)
> + return true;
> +
> + return false;
> +}
> +
> +bool board_is_generic(void)
> +{
> + if (gd->board_type == EXYNOS5_BOARD_GENERIC)
> + return true;
> +
> + return false;
> +}
> +
> +/**
> + * get_board_rev() - return detected board revision.
> + *
> + * @return: return board revision number for XU3 or 0 for generic
> + */
> +u32 get_board_rev(void)
> +{
> + if (board_is_generic())
> + return 0;
> +
> + return odroid_get_rev();
> +}
> +
> +/**
> + * get_board_type() - returns board type string.
> + *
> + * @return: return board type string for XU3 or empty string for generic
> + */
> +const char *get_board_type(void)
> +{
> + const char *generic = "";
> +
> + if (board_is_generic())
> + return generic;
> +
> + return odroid_get_type_str();
> +}
> +
> +/**
> + * set_board_type() - set board type in gd->board_type.
> + * As default type set EXYNOS5_BOARD_GENERIC, if detect Odroid,
> + * then set it's proper type.
its
> + */
> +void set_board_type(void)
> +{
> + const struct udevice_id *of_match = board_ids;
> + int ret;
> +
> + gd->board_type = EXYNOS5_BOARD_GENERIC;
> +
> + while (of_match->compatible) {
> + ret = fdt_node_check_compatible(gd->fdt_blob, 0,
> + of_match->compatible);
> + if (ret)
> + of_match++;
> +
> + gd->board_type = of_match->data;
> + break;
> + }
> +
> + /* If Odroid, then check it's revision */
its
> + if (board_is_odroidxu3())
> + gd->board_type = odroid_get_board_type();
> +}
> diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c
> index 4250f72..4d9e151 100644
> --- a/board/samsung/common/exynos5-dt.c
> +++ b/board/samsung/common/exynos5-dt.c
> @@ -27,7 +27,10 @@
> #include <power/pmic.h>
> #include <power/max77686_pmic.h>
> #include <power/regulator.h>
> +#include <power/s2mps11.h>
> #include <power/s5m8767.h>
> +#include <samsung/exynos5-dt-types.h>
> +#include <samsung/misc.h>
> #include <tmu.h>
>
> DECLARE_GLOBAL_DATA_PTR;
> @@ -335,15 +338,24 @@ int board_usb_init(int index, enum usb_init_type init)
> #ifdef CONFIG_SET_DFU_ALT_INFO
> char *get_dfu_alt_system(char *interface, char *devstr)
> {
> + char *info = "Not supported!";
> +
> + if (board_is_odroidxu4())
> + return info;
> +
> return getenv("dfu_alt_system");
> }
>
> char *get_dfu_alt_boot(char *interface, char *devstr)
> {
> + char *info = "Not supported!";
> struct mmc *mmc;
> char *alt_boot;
> int dev_num;
>
> + if (board_is_odroidxu4())
> + return info;
> +
> dev_num = simple_strtoul(devstr, NULL, 10);
>
> mmc = find_mmc_device(dev_num);
> diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig
> index f38c37b..d7e5698 100644
> --- a/configs/odroid-xu3_defconfig
> +++ b/configs/odroid-xu3_defconfig
> @@ -16,3 +16,5 @@ CONFIG_VIDEO_BRIDGE=y
> CONFIG_SYS_PROMPT="ODROID-XU3 # "
> CONFIG_USB=y
> CONFIG_DM_USB=y
> +CONFIG_ADC=y
> +CONFIG_ADC_EXYNOS=y
> diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
> index 3c70158..648e48b 100644
> --- a/include/configs/odroid_xu3.h
> +++ b/include/configs/odroid_xu3.h
> @@ -94,6 +94,8 @@
> "boot.scr fat 0 1;" \
> "boot.cmd fat 0 1;" \
> "exynos5422-odroidxu3.dtb fat 0 1;" \
> + "exynos5422-odroidxu3-lite.dtb fat 0 1;" \
> + "exynos5422-odroidxu4.dtb fat 0 1;" \
> "boot part 0 1;" \
> "root part 0 2\0"
>
> @@ -113,9 +115,19 @@
>
> /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
> #define CONFIG_MISC_COMMON
> +#define CONFIG_MISC_INIT_R
> #define CONFIG_SET_DFU_ALT_INFO
> #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
>
> +/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> +#define CONFIG_ODROID_REV_AIN 9
> +#define CONFIG_REVISION_TAG
> +#define CONFIG_BOARD_TYPES
> +
> +#undef CONFIG_SYS_BOARD
> +#define CONFIG_SYS_BOARD "odroid"
> +
> /* Define new extra env settings, including DFU settings */
> #undef CONFIG_EXTRA_ENV_SETTINGS
> #define CONFIG_EXTRA_ENV_SETTINGS \
> diff --git a/include/samsung/exynos5-dt-types.h b/include/samsung/exynos5-dt-types.h
> new file mode 100644
> index 0000000..479e2e7
> --- /dev/null
> +++ b/include/samsung/exynos5-dt-types.h
> @@ -0,0 +1,27 @@
> +#ifndef _EXYNOS5_DT_H_
> +#define _EXYNOS5_DT_H_
> +
> +enum {
> + EXYNOS5_BOARD_GENERIC,
> +
> + EXYNOS5_BOARD_ODROID_XU3,
> + EXYNOS5_BOARD_ODROID_XU3_REV01,
> + EXYNOS5_BOARD_ODROID_XU3_REV02,
> + EXYNOS5_BOARD_ODROID_XU4_REV01,
> + EXYNOS5_BOARD_ODROID_UNKNOWN,
> +
> + EXYNOS5_BOARD_COUNT,
> +};
> +
> +struct odroid_rev_info {
> + int board_type;
> + int board_rev;
> + int adc_val;
> + const char *name;
> +};
> +
> +bool board_is_generic(void);
> +bool board_is_odroidxu3(void);
> +bool board_is_odroidxu4(void);
> +
> +#endif
> --
> 1.9.1
>
I can't help wondering why we don't just have separate device trees
for these boards. It seems a pain to try to support them all with this
auto-detection. Anyway, I think I already asked this and you're pretty
sure this is what you want. I do understand the need to make it
painless for users.
Regards,
Simon
More information about the U-Boot
mailing list