[U-Boot] [PATCH V2 11/11] exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4.
Przemyslaw Marczak
p.marczak at samsung.com
Tue Oct 13 13:59:35 CEST 2015
Hello Simon,
On 10/03/2015 04:28 PM, Simon Glass wrote:
> Hi Przemyslaw,
>
> On 21 September 2015 at 13:26, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
>> This commit adds additional file with implementation of board
>> detection code for Odroid-XU3/XU4.
>>
>> The detection depends on compatible found in fdt:
>> - "samsung,exynos5" - uses Exynos5 generic code
>> - "samsung,odroidxu3" - try detect XU3 revision
>>
>> There are few revisions of Odroid XU3/XU4, each can be detected
>> by checking the value of channel 9 of built-in ADC:
>> Rev ADC Board
>> 0.1 0 XU3 0.1
>> 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT
>> 0.3 1280 XU4 0.1
>>
>> The detection code depends on the ADC+10% value.
>>
>> Implementation of functions:
>> - set_board_type() - read ADC and set type
>> - get_board_rev() - returns board revision: 1..3
>> - get_board_type() - returns board type string
>>
>> Additional functions with return values of bool:
>> - board_is_generic() - true if found compatible "samsung,exynos5"
>> but not "samsung,odroidxu3"
>> - board_is_odroidxu3() - true if found compatible "samsung,odroidxu3"
>> and one of XU3 revision.
>> - board_is_odroidxu4() - true if found compatible "samsung,odroidxu3"
>> and XU4 revision.
>>
>> After I2C controller init, the get_board_type() can check
>> if the XU3 board is a "Lite" variant, by probing chip
>> 0x40 on I2C0 (INA231 - exists only on non-lite).
>> This is useful for setting fdt file name at misc_init_r().
>>
>> Enabled configs:
>> - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
>> - CONFIG_ODROID_REV_AIN
>> - CONFIG_REVISION_TAG
>> - CONFIG_BOARD_TYPES
>>
>> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
>> ---
>> Changes V2:
>> - move detection code from exynos5-dt.c to exynos5-dt-types.c
>> - add header with board type function declarations
>> - check for compatible before do the detection
>> - update the ADC max values with 20% tolerance
>> - fix XU4 adc value, related to mistake from table in XU4 schematic
>> - return "Not supported" for XU4 when calls one of:
>> --dfu_get_alt_boot()
>> --dfu_get_alt_system()
>> - extend ${dfu_alt_system} by strings:
>> -- 'exynos5422-odroidxu3-lite.dtb'
>> -- 'exynos5422-odroidxu4.dtb' - allows prepare card on XU3
>> ---
>> board/samsung/common/Makefile | 5 +-
>> board/samsung/common/exynos5-dt-types.c | 196 ++++++++++++++++++++++++++++++++
>> board/samsung/common/exynos5-dt.c | 12 ++
>> configs/odroid-xu3_defconfig | 2 +
>> include/configs/odroid_xu3.h | 12 ++
>> include/samsung/exynos5-dt-types.h | 27 +++++
>> 6 files changed, 253 insertions(+), 1 deletion(-)
>> create mode 100644 board/samsung/common/exynos5-dt-types.c
>> create mode 100644 include/samsung/exynos5-dt-types.h
>
> Reviewed-by: Simon Glass <sjg at chromium.org>
>
> See nits below.
>
Ok.
>>
>> diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile
>> index 6cbd906..ef1a8f3 100644
>> --- a/board/samsung/common/Makefile
>> +++ b/board/samsung/common/Makefile
>> @@ -11,5 +11,8 @@ obj-$(CONFIG_MISC_COMMON) += misc.o
>>
>> ifndef CONFIG_SPL_BUILD
>> obj-$(CONFIG_BOARD_COMMON) += board.o
>> -obj-$(CONFIG_EXYNOS5_DT) += exynos5-dt.o
>> +ifdef CONFIG_EXYNOS5_DT
>> +obj-y += exynos5-dt.o
>> +obj-$(CONFIG_BOARD_TYPES) += exynos5-dt-types.o
>> +endif
>> endif
>> diff --git a/board/samsung/common/exynos5-dt-types.c b/board/samsung/common/exynos5-dt-types.c
>> new file mode 100644
>> index 0000000..1364e98
>> --- /dev/null
>> +++ b/board/samsung/common/exynos5-dt-types.c
>> @@ -0,0 +1,196 @@
>> +/*
>> + * Copyright (C) 2015 Samsung Electronics
>> + * Przemyslaw Marczak <p.marczak at samsung.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#include <adc.h>
>> +#include <common.h>
>> +#include <dm.h>
>> +#include <errno.h>
>> +#include <fdtdec.h>
>> +#include <power/pmic.h>
>> +#include <power/regulator.h>
>> +#include <power/s2mps11.h>
>> +#include <samsung/exynos5-dt-types.h>
>> +#include <samsung/misc.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +static const struct udevice_id board_ids[] = {
>> + { .compatible = "samsung,odroidxu3", .data = EXYNOS5_BOARD_ODROID_XU3 },
>> + { .compatible = "samsung,exynos5", .data = EXYNOS5_BOARD_GENERIC },
>> + { },
>> +};
>> +
>> +/**
>> + * Odroix XU3/4 board revisions:
>> + * Rev ADCmax Board
>> + * 0.1 0 XU3 0.1
>> + * 0.2 410 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231)
>> + * 0.3 1408 XU4 0.1
>> + * Use +10 % for ADC value tolerance.
>> + */
>> +struct odroid_rev_info odroid_info[] = {
>> + { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" },
>> + { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 410, "xu3" },
>> + { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1408, "xu4" },
>> + { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" },
>> +};
>> +
>> +static unsigned int odroid_get_rev(void)
>> +{
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
>> + if (odroid_info[i].board_type == gd->board_type)
>> + return odroid_info[i].board_rev;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int odroid_get_board_type(void)
>> +{
>> + unsigned int adcval;
>> + int ret, i;
>> +
>> + ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN, &adcval);
>> + if (ret)
>> + goto rev_default;
>> +
>> + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
>> + /* ADC tolerance: +20 % */
>> + if (adcval < odroid_info[i].adc_val)
>> + return odroid_info[i].board_type;
>> + }
>> +
>> +rev_default:
>> + return EXYNOS5_BOARD_ODROID_XU3;
>> +}
>> +
>> +/**
>> + * odroid_get_type_str - returns pointer to one of the board type string.
>> + * Board types: "xu3", "xu3-lite", "xu4". However the "xu3lite" can be
>> + * detected only when the i2c controller is ready to use. Fortunately,
>> + * XU3 and XU3L are compatible, and the information about board lite
>> + * revision is needed before booting the linux, to set proper environment
>> + * variable: $fdtfile.
>> + */
>> +static const char *odroid_get_type_str(void)
>> +{
>> + const char *type_xu3l = "xu3-lite";
>> + struct udevice *dev, *chip;
>> + int i, ret;
>> +
>> + if (gd->board_type != EXYNOS5_BOARD_ODROID_XU3_REV02)
>> + goto exit;
>> +
>> + ret = pmic_get("s2mps11", &dev);
>> + if (ret)
>> + goto exit;
>> +
>> + /* Enable LDO26: 3.0V */
>> + ret = pmic_reg_write(dev, S2MPS11_REG_L26CTRL,
>> + S2MPS11_LDO26_ENABLE);
>> + if (ret)
>> + goto exit;
>> +
>> + /* Check XU3Lite by probe INA231 I2C0:0x40 */
>> + ret = uclass_get_device(UCLASS_I2C, 0, &dev);
>
> Yikes! What happens if you want to add a driver for this?
>
This may look much more pretty, but the INA's driver is not needed at
U-Boot and also I don't like implement everything at once, since as you
can see it takes some time to review and fixing again and again.
>> + if (ret)
>> + goto exit;
>> +
>> + ret = dm_i2c_probe(dev, 0x40, 0x0, &chip);
>> + if (ret)
>> + return type_xu3l;
>> +
>> +exit:
>> + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
>> + if (odroid_info[i].board_type == gd->board_type)
>> + return odroid_info[i].name;
>> + }
>> +
>> + return NULL;
>> +}
>> +
>> +bool board_is_odroidxu3(void)
>> +{
>> + if (gd->board_type >= EXYNOS5_BOARD_ODROID_XU3 &&
>> + gd->board_type <= EXYNOS5_BOARD_ODROID_XU3_REV02)
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> +bool board_is_odroidxu4(void)
>> +{
>> + if (gd->board_type == EXYNOS5_BOARD_ODROID_XU4_REV01)
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> +bool board_is_generic(void)
>> +{
>> + if (gd->board_type == EXYNOS5_BOARD_GENERIC)
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> +/**
>> + * get_board_rev() - return detected board revision.
>> + *
>> + * @return: return board revision number for XU3 or 0 for generic
>> + */
>> +u32 get_board_rev(void)
>> +{
>> + if (board_is_generic())
>> + return 0;
>> +
>> + return odroid_get_rev();
>> +}
>> +
>> +/**
>> + * get_board_type() - returns board type string.
>> + *
>> + * @return: return board type string for XU3 or empty string for generic
>> + */
>> +const char *get_board_type(void)
>> +{
>> + const char *generic = "";
>> +
>> + if (board_is_generic())
>> + return generic;
>> +
>> + return odroid_get_type_str();
>> +}
>> +
>> +/**
>> + * set_board_type() - set board type in gd->board_type.
>> + * As default type set EXYNOS5_BOARD_GENERIC, if detect Odroid,
>> + * then set it's proper type.
>
> its
>
Right.
>> + */
>> +void set_board_type(void)
>> +{
>> + const struct udevice_id *of_match = board_ids;
>> + int ret;
>> +
>> + gd->board_type = EXYNOS5_BOARD_GENERIC;
>> +
>> + while (of_match->compatible) {
>> + ret = fdt_node_check_compatible(gd->fdt_blob, 0,
>> + of_match->compatible);
>> + if (ret)
>> + of_match++;
>> +
>> + gd->board_type = of_match->data;
>> + break;
>> + }
>> +
>> + /* If Odroid, then check it's revision */
>
> its
>
ok.
>> + if (board_is_odroidxu3())
>> + gd->board_type = odroid_get_board_type();
>> +}
>> diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c
>> index 4250f72..4d9e151 100644
>> --- a/board/samsung/common/exynos5-dt.c
>> +++ b/board/samsung/common/exynos5-dt.c
>> @@ -27,7 +27,10 @@
>> #include <power/pmic.h>
>> #include <power/max77686_pmic.h>
>> #include <power/regulator.h>
>> +#include <power/s2mps11.h>
>> #include <power/s5m8767.h>
>> +#include <samsung/exynos5-dt-types.h>
>> +#include <samsung/misc.h>
>> #include <tmu.h>
>>
>> DECLARE_GLOBAL_DATA_PTR;
>> @@ -335,15 +338,24 @@ int board_usb_init(int index, enum usb_init_type init)
>> #ifdef CONFIG_SET_DFU_ALT_INFO
>> char *get_dfu_alt_system(char *interface, char *devstr)
>> {
>> + char *info = "Not supported!";
>> +
>> + if (board_is_odroidxu4())
>> + return info;
>> +
>> return getenv("dfu_alt_system");
>> }
>>
>> char *get_dfu_alt_boot(char *interface, char *devstr)
>> {
>> + char *info = "Not supported!";
>> struct mmc *mmc;
>> char *alt_boot;
>> int dev_num;
>>
>> + if (board_is_odroidxu4())
>> + return info;
>> +
>> dev_num = simple_strtoul(devstr, NULL, 10);
>>
>> mmc = find_mmc_device(dev_num);
>> diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig
>> index f38c37b..d7e5698 100644
>> --- a/configs/odroid-xu3_defconfig
>> +++ b/configs/odroid-xu3_defconfig
>> @@ -16,3 +16,5 @@ CONFIG_VIDEO_BRIDGE=y
>> CONFIG_SYS_PROMPT="ODROID-XU3 # "
>> CONFIG_USB=y
>> CONFIG_DM_USB=y
>> +CONFIG_ADC=y
>> +CONFIG_ADC_EXYNOS=y
>> diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
>> index 3c70158..648e48b 100644
>> --- a/include/configs/odroid_xu3.h
>> +++ b/include/configs/odroid_xu3.h
>> @@ -94,6 +94,8 @@
>> "boot.scr fat 0 1;" \
>> "boot.cmd fat 0 1;" \
>> "exynos5422-odroidxu3.dtb fat 0 1;" \
>> + "exynos5422-odroidxu3-lite.dtb fat 0 1;" \
>> + "exynos5422-odroidxu4.dtb fat 0 1;" \
>> "boot part 0 1;" \
>> "root part 0 2\0"
>>
>> @@ -113,9 +115,19 @@
>>
>> /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
>> #define CONFIG_MISC_COMMON
>> +#define CONFIG_MISC_INIT_R
>> #define CONFIG_SET_DFU_ALT_INFO
>> #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
>>
>> +/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
>> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
>> +#define CONFIG_ODROID_REV_AIN 9
>> +#define CONFIG_REVISION_TAG
>> +#define CONFIG_BOARD_TYPES
>> +
>> +#undef CONFIG_SYS_BOARD
>> +#define CONFIG_SYS_BOARD "odroid"
>> +
>> /* Define new extra env settings, including DFU settings */
>> #undef CONFIG_EXTRA_ENV_SETTINGS
>> #define CONFIG_EXTRA_ENV_SETTINGS \
>> diff --git a/include/samsung/exynos5-dt-types.h b/include/samsung/exynos5-dt-types.h
>> new file mode 100644
>> index 0000000..479e2e7
>> --- /dev/null
>> +++ b/include/samsung/exynos5-dt-types.h
>> @@ -0,0 +1,27 @@
>> +#ifndef _EXYNOS5_DT_H_
>> +#define _EXYNOS5_DT_H_
>> +
>> +enum {
>> + EXYNOS5_BOARD_GENERIC,
>> +
>> + EXYNOS5_BOARD_ODROID_XU3,
>> + EXYNOS5_BOARD_ODROID_XU3_REV01,
>> + EXYNOS5_BOARD_ODROID_XU3_REV02,
>> + EXYNOS5_BOARD_ODROID_XU4_REV01,
>> + EXYNOS5_BOARD_ODROID_UNKNOWN,
>> +
>> + EXYNOS5_BOARD_COUNT,
>> +};
>> +
>> +struct odroid_rev_info {
>> + int board_type;
>> + int board_rev;
>> + int adc_val;
>> + const char *name;
>> +};
>> +
>> +bool board_is_generic(void);
>> +bool board_is_odroidxu3(void);
>> +bool board_is_odroidxu4(void);
>> +
>> +#endif
>> --
>> 1.9.1
>>
>
> I can't help wondering why we don't just have separate device trees
> for these boards. It seems a pain to try to support them all with this
> auto-detection. Anyway, I think I already asked this and you're pretty
> sure this is what you want. I do understand the need to make it
> painless for users.
>
> Regards,
> Simon
>
It's much more easy for us, to support several Odroid revisions with the
same SoC by the single U-Boot binary. It's also easy for the users, if
they have a single binary for actually the same board variants.
And it's one less thing, that can be broken by the mistake :)
Thank you for your helpful comments, I will take them into account in V3.
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
More information about the U-Boot
mailing list