[U-Boot] zynq: mmc boot issue

[Hannes Schmelzer]

Hi Jagan,

i tried this time most current mainline u-boot with default config.
My ZC702 evalboard is still booting fine from MMC-card.

best regars,
Hannes

On 10/07/2015 12:02 PM, Jagan Teki wrote:
> Hi Michal/Siva,
>
> Looks like somethings broken with mmc boot, could you please check.
>
> dump1:
> U-Boot SPL 2015.10-rc4-00104-gafcdb02-dirty (Oct 07 2015 - 15:16:54)
> mmc boot
> reading system.dtb
> spl_load_image_fat_os: error reading image system.dtb, err - -1
> reading u-boot.img
> spl_load_image_fat: error reading image u-boot-dtb.img, err - -1
> spl: mmc: no boot mode left to try
> ### ERROR ### Please RESET the board ###
>
> dump2:
> U-Boot SPL 2015.10-rc4-00104-gafcdb02-dirty (Oct 07 2015 - 15:16:54)
> mmc boot
> MMC: no card present
> spl: mmc init failed with error: -16
> ### ERROR ### Please RESET the board ###
>
> -- Jagan.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>