[U-Boot] mx6qp sabreauto hangs after saveenv/reset

[Fabio Estevam]

Hi Peng,

On Thu, Oct 8, 2015 at 11:12 PM, Peng Fan <b51431 at freescale.com> wrote:

> Whether plugging nand chip into the socket or without nand chip, the board reboot
> well in my side. I did not do stress test, only do a few test, and each time
> 'reset', it can boot fine.

Thanks for testing it.

Maybe it is an issue with the board I have. I should receive a new one
next week and will test it.

By the way, does your board work standalone (without the base board)?
Mine only works when it is connected to the base board and in this
case I need to supply 12V.

Thanks