[U-Boot] mx6qp sabreauto hangs after saveenv/reset

[Nitin Garg]

On 10/09/2015 09:59 AM, Fabio Estevam wrote:
> Hi Peng,
> 
> On Thu, Oct 8, 2015 at 11:12 PM, Peng Fan <b51431 at freescale.com> wrote:
> 
>> Whether plugging nand chip into the socket or without nand chip, the board reboot
>> well in my side. I did not do stress test, only do a few test, and each time
>> 'reset', it can boot fine.
> 
> Thanks for testing it.
> 
> Maybe it is an issue with the board I have. I should receive a new one
> next week and will test it.
> 
> By the way, does your board work standalone (without the base board)?
> Mine only works when it is connected to the base board and in this
> case I need to supply 12V.
> 
> Thanks
> 
There is a jumper (J2) to change it to standalone. 
Mine works without baseboard and 5V supply.

-Nitin