[U-Boot] [PATCH v1 12/12] rockchip: Add basic support for evb-rk3036 board

[hl]

Hi Simon,

On 22/10/15 22:08, Simon Glass wrote:
> On 20 October 2015 at 20:37, Lin Huang <hl at rock-chips.com> wrote:
>> This add some basic files required to allow the board to dispaly
>> serial message and can run command(mmc info etc)
>>
>> Signed-off-by: Lin Huang <hl at rock-chips.com>
>> ---
>> Changes in v1:
>> - clean copyright announcement
>>
>>   arch/arm/dts/Makefile                    |  3 ++-
>>   arch/arm/dts/rk3036-sdk.dts              | 46 ++++++++++++++++++++++++++++++++
>>   board/evb_rk3036/evb_rk3036/Kconfig      | 15 +++++++++++
>>   board/evb_rk3036/evb_rk3036/MAINTAINERS  |  0
>>   board/evb_rk3036/evb_rk3036/Makefile     |  7 +++++
>>   board/evb_rk3036/evb_rk3036/evb_rk3036.c |  7 +++++
>>   configs/evb-rk3036_defconfig             | 41 ++++++++++++++++++++++++++++
>>   include/configs/evb_rk3036.h             | 12 +++++++++
>>   8 files changed, 130 insertions(+), 1 deletion(-)
>>   create mode 100644 arch/arm/dts/rk3036-sdk.dts
>>   create mode 100644 board/evb_rk3036/evb_rk3036/Kconfig
>>   create mode 100644 board/evb_rk3036/evb_rk3036/MAINTAINERS
>>   create mode 100644 board/evb_rk3036/evb_rk3036/Makefile
>>   create mode 100644 board/evb_rk3036/evb_rk3036/evb_rk3036.c
>>   create mode 100644 configs/evb-rk3036_defconfig
>>   create mode 100644 include/configs/evb_rk3036.h
>>
> Can you also please update doc/README.rockchip with build instructions
> and how to get an image onto this board?
     I try to figure out how to merge binary blob and u-boot-dtb.bin use 
mkimage,
     i will update doc/README ASAP when i finish it. And where should  
the binary blob store?
> Regards,
> Simon
>
>
>

-- 
Lin Huang