[U-Boot] [PATCH v3] arm: atmel: Add SAMA5D2 Xplained board

Wenyou Yang wenyou.yang at atmel.com
Tue Oct 27 07:46:29 CET 2015


The board supports following features:
 - Boot media support: SD card/e.MMC/SPI flash,
 - Support LCD display (optional, disabled by default),
 - Support ethernet,
 - Support USB mass storage.

Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
---
The patch is based on the following patches sent in mailing list.
	[PATCH] gpio: atmel: Add the PIO4 driver support
	[PATCH] arm: at91: Change the Chip ID registers' addresses
	[PATCH v3] mmc: atmel: Add atmel sdhci support
	[PATCH v2] arm: at91: clock: Add the generated clock support

Changes in v3:
 1./ change defines-->definitions for more clearly in asm/arch/sama5d2.h.
 2./ remove unused cpu_is_sama5d2x() macros.
 3./ fix spelling error "adress".
 4./ add __weak attribute for has_lcdc().
 5./ remove SPL configs.

Changes in v2:
 1./ re-order SAMA5D2 statements alphabetically.
 2./ remove redundant "Unknown CPU type".
 3./ rework sama5d2's macros.
 4./ remove some #ifdef before functions.
 5./ move CONFIG_CMD_SF to Kconfig.
 6./ remove NAND macros from config file.
 7./ CONFIG_BOOTCOMMAND for sf uses defines in at91-sama5_common.h.

 arch/arm/mach-at91/Kconfig                       |    5 +
 arch/arm/mach-at91/armv7/Makefile                |    1 +
 arch/arm/mach-at91/armv7/sama5d2_devices.c       |   60 +++++
 arch/arm/mach-at91/include/mach/at91_pmc.h       |    9 +-
 arch/arm/mach-at91/include/mach/atmel_usba_udc.h |    3 +-
 arch/arm/mach-at91/include/mach/hardware.h       |    2 +
 arch/arm/mach-at91/include/mach/sama5d2.h        |  203 ++++++++++++++++
 board/atmel/sama5d2_xplained/Kconfig             |   15 ++
 board/atmel/sama5d2_xplained/MAINTAINERS         |    7 +
 board/atmel/sama5d2_xplained/Makefile            |    8 +
 board/atmel/sama5d2_xplained/sama5d2_xplained.c  |  282 ++++++++++++++++++++++
 configs/sama5d2_xplained_mmc_defconfig           |   11 +
 configs/sama5d2_xplained_spiflash_defconfig      |   11 +
 include/configs/sama5d2_xplained.h               |  122 ++++++++++
 14 files changed, 733 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/mach-at91/armv7/sama5d2_devices.c
 create mode 100644 arch/arm/mach-at91/include/mach/sama5d2.h
 create mode 100644 board/atmel/sama5d2_xplained/Kconfig
 create mode 100644 board/atmel/sama5d2_xplained/MAINTAINERS
 create mode 100644 board/atmel/sama5d2_xplained/Makefile
 create mode 100644 board/atmel/sama5d2_xplained/sama5d2_xplained.c
 create mode 100644 configs/sama5d2_xplained_mmc_defconfig
 create mode 100644 configs/sama5d2_xplained_spiflash_defconfig
 create mode 100644 include/configs/sama5d2_xplained.h

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index fdaf328..c333647 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -71,6 +71,10 @@ config TARGET_AT91SAM9X5EK
 	select CPU_ARM926EJS
 	select SUPPORT_SPL
 
+config TARGET_SAMA5D2_XPLAINED
+	bool "SAMA5D2 Xplained board"
+	select CPU_V7
+
 config TARGET_SAMA5D3_XPLAINED
 	bool "SAMA5D3 Xplained board"
 	select CPU_V7
@@ -123,6 +127,7 @@ source "board/atmel/at91sam9m10g45ek/Kconfig"
 source "board/atmel/at91sam9n12ek/Kconfig"
 source "board/atmel/at91sam9rlek/Kconfig"
 source "board/atmel/at91sam9x5ek/Kconfig"
+source "board/atmel/sama5d2_xplained/Kconfig"
 source "board/atmel/sama5d3_xplained/Kconfig"
 source "board/atmel/sama5d3xek/Kconfig"
 source "board/atmel/sama5d4_xplained/Kconfig"
diff --git a/arch/arm/mach-at91/armv7/Makefile b/arch/arm/mach-at91/armv7/Makefile
index f4f35a4..9538bc1 100644
--- a/arch/arm/mach-at91/armv7/Makefile
+++ b/arch/arm/mach-at91/armv7/Makefile
@@ -8,6 +8,7 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
+obj-$(CONFIG_SAMA5D2)	+= sama5d2_devices.o
 obj-$(CONFIG_SAMA5D3)	+= sama5d3_devices.o
 obj-$(CONFIG_SAMA5D4)	+= sama5d4_devices.o
 obj-y += clock.o
diff --git a/arch/arm/mach-at91/armv7/sama5d2_devices.c b/arch/arm/mach-at91/armv7/sama5d2_devices.c
new file mode 100644
index 0000000..26883fc
--- /dev/null
+++ b/arch/arm/mach-at91/armv7/sama5d2_devices.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Wenyou Yang <wenyou.yang at atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/sama5d2.h>
+
+char *get_cpu_name()
+{
+	unsigned int extension_id = get_extension_chip_id();
+
+	if (cpu_is_sama5d2()) {
+		switch (extension_id) {
+		case ARCH_EXID_SAMA5D21CU:
+			return "SAMA5D21";
+		case ARCH_EXID_SAMA5D22CU:
+			return "SAMA5D22-CU";
+		case ARCH_EXID_SAMA5D22CN:
+			return "SAMA5D22-CN";
+		case ARCH_EXID_SAMA5D23CU:
+			return "SAMA5D23-CU";
+		case ARCH_EXID_SAMA5D24CX:
+			return "SAMA5D24-CX";
+		case ARCH_EXID_SAMA5D24CU:
+			return "SAMA5D24-CU";
+		case ARCH_EXID_SAMA5D26CU:
+			return "SAMA5D26-CU";
+		case ARCH_EXID_SAMA5D27CU:
+			return "SAMA5D27-CU";
+		case ARCH_EXID_SAMA5D27CN:
+			return "SAMA5D27-CN";
+		case ARCH_EXID_SAMA5D28CU:
+			return "SAMA5D28-CU";
+		case ARCH_EXID_SAMA5D28CN:
+			return "SAMA5D28-CN";
+		default:
+			goto err_exit;
+		}
+	}
+
+err_exit:
+	return "Unknown CPU type";
+}
+
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+void at91_udp_hw_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr);
+
+	at91_periph_clk_enable(ATMEL_ID_UDPHS);
+}
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 8a3fb94..5adaa30 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -78,7 +78,8 @@ typedef struct at91_pmc {
 #define AT91_PMC_PLLXR_DIV(x)		(x & 0xFF)
 #define AT91_PMC_PLLXR_PLLCOUNT(x)	((x & 0x3F) << 8)
 #define AT91_PMC_PLLXR_OUT(x)		((x & 0x03) << 14)
-#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4)
+#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \
+	defined(CONFIG_SAMA5D4)
 #define AT91_PMC_PLLXR_MUL(x)		((x & 0x7F) << 18)
 #else
 #define AT91_PMC_PLLXR_MUL(x)		((x & 0x7FF) << 16)
@@ -97,7 +98,8 @@ typedef struct at91_pmc {
 #define AT91_PMC_MCKR_CSS_PLLB		0x00000003
 #define AT91_PMC_MCKR_CSS_MASK		0x00000003
 
-#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) || \
+#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \
+	defined(CONFIG_SAMA5D4) || \
 	defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12)
 #define AT91_PMC_MCKR_PRES_1		0x00000000
 #define AT91_PMC_MCKR_PRES_2		0x00000010
@@ -127,10 +129,7 @@ typedef struct at91_pmc {
 #else
 #define AT91_PMC_MCKR_MDIV_1		0x00000000
 #define AT91_PMC_MCKR_MDIV_2		0x00000100
-#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) || \
-	defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12)
 #define AT91_PMC_MCKR_MDIV_3		0x00000300
-#endif
 #define AT91_PMC_MCKR_MDIV_4		0x00000200
 #define AT91_PMC_MCKR_MDIV_MASK		0x00000300
 #endif
diff --git a/arch/arm/mach-at91/include/mach/atmel_usba_udc.h b/arch/arm/mach-at91/include/mach/atmel_usba_udc.h
index 38b5012..46a329b 100644
--- a/arch/arm/mach-at91/include/mach/atmel_usba_udc.h
+++ b/arch/arm/mach-at91/include/mach/atmel_usba_udc.h
@@ -31,7 +31,8 @@ static struct usba_ep_data usba_udc_ep[] = {
 	EP("ep5", 5, 1024, 3, 1, 1),
 	EP("ep6", 6, 1024, 3, 1, 1),
 };
-#elif defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4)
+#elif defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \
+	defined(CONFIG_SAMA5D4)
 static struct usba_ep_data usba_udc_ep[] = {
 	EP("ep0", 0, 64, 1, 0, 0),
 	EP("ep1", 1, 1024, 3, 1, 0),
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index ff6b71b..38abfda 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -23,6 +23,8 @@
 # include <asm/arch/at91sam9g45.h>
 #elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
 # include <asm/arch/at91sam9x5.h>
+#elif defined(CONFIG_SAMA5D2)
+# include <asm/arch/sama5d2.h>
 #elif defined(CONFIG_SAMA5D3)
 # include <asm/arch/sama5d3.h>
 #elif defined(CONFIG_SAMA5D4)
diff --git a/arch/arm/mach-at91/include/mach/sama5d2.h b/arch/arm/mach-at91/include/mach/sama5d2.h
new file mode 100644
index 0000000..c85571c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/sama5d2.h
@@ -0,0 +1,203 @@
+/*
+ * Chip-specific header file for the SAMA5D2 SoC
+ *
+ * Copyright (C) 2015 Atmel
+ *		      Wenyou Yang <wenyou.yang at atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __SAMA5D2_H
+#define __SAMA5D2_H
+
+/*
+ * definitions to be used in other places
+ */
+#define CONFIG_AT91FAMILY	/* It's a member of AT91 */
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ		0	/* FIQ Interrupt ID */
+/* 1 */
+#define ATMEL_ID_ARM		2	/* Performance Monitor Unit */
+#define ATMEL_ID_PIT		3	/* Periodic Interval Timer Interrupt */
+#define ATMEL_ID_WDT		4	/* Watchdog Timer Interrupt */
+#define ATMEL_ID_GMAC		5	/* Ethernet MAC */
+#define ATMEL_ID_XDMAC0		6	/* DMA Controller 0 */
+#define ATMEL_ID_XDMAC1		7	/* DMA Controller 1 */
+#define ATMEL_ID_ICM		8	/* Integrity Check Monitor */
+#define ATMEL_ID_AES		9	/* Advanced Encryption Standard */
+#define ATMEL_ID_AESB		10	/* AES bridge */
+#define ATMEL_ID_TDES		11	/* Triple Data Encryption Standard */
+#define ATMEL_ID_SHA		12	/* SHA Signature */
+#define ATMEL_ID_MPDDRC		13	/* MPDDR Controller */
+#define ATMEL_ID_MATRIX1	14	/* H32MX, 32-bit AHB Matrix */
+#define ATMEL_ID_MATRIX0	15	/* H64MX, 64-bit AHB Matrix */
+#define ATMEL_ID_SECUMOD	16	/* Secure Module */
+#define ATMEL_ID_HSMC		17	/* Multi-bit ECC interrupt */
+#define ATMEL_ID_PIOA		18	/* Parallel I/O Controller A */
+#define ATMEL_ID_FLEXCOM0	19	/* FLEXCOM0 */
+#define ATMEL_ID_FLEXCOM1	20	/* FLEXCOM1 */
+#define ATMEL_ID_FLEXCOM2	21	/* FLEXCOM2 */
+#define ATMEL_ID_FLEXCOM3	22	/* FLEXCOM3 */
+#define ATMEL_ID_FLEXCOM4	23	/* FLEXCOM4 */
+#define ATMEL_ID_UART0		24	/* UART0 */
+#define ATMEL_ID_UART1		25	/* UART1 */
+#define ATMEL_ID_UART2		26	/* UART2 */
+#define ATMEL_ID_UART3		27	/* UART3 */
+#define ATMEL_ID_UART4		28	/* UART4 */
+#define ATMEL_ID_TWIHS0		29	/* Two-wire Interface 0 */
+#define ATMEL_ID_TWIHS1		30	/* Two-wire Interface 1 */
+#define ATMEL_ID_SDMMC0		31	/* Secure Data Memory Card Controller 0 */
+#define ATMEL_ID_SDMMC1		32	/* Secure Data Memory Card Controller 1 */
+#define ATMEL_ID_SPI0		33	/* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1		34	/* Serial Peripheral Interface 1 */
+#define ATMEL_ID_TC0		35	/* Timer Counter 0 (ch.0,1,2) */
+#define ATMEL_ID_TC1		36	/* Timer Counter 1 (ch.3,4,5) */
+/* 37 */
+#define ATMEL_ID_PWM		38	/* PWMController0 (ch. 0,1,2,3) */
+/* 39 */
+#define ATMEL_ID_ADC		40	/* Touch Screen ADC Controller */
+#define ATMEL_ID_UHPHS		41	/* USB Host High Speed */
+#define ATMEL_ID_UDPHS		42	/* USB Device High Speed */
+#define ATMEL_ID_SSC0		43	/* Serial Synchronous Controller 0 */
+#define ATMEL_ID_SSC1		44	/* Serial Synchronous Controller 1 */
+#define ATMEL_ID_LCDC		45	/* LCD Controller */
+#define ATMEL_ID_ISI		46	/* Image Sensor Controller, for A5D2, named after ISC */
+#define ATMEL_ID_TRNG		47	/* True Random Number Generator */
+#define ATMEL_ID_PDMIC		48	/* PDM Interface Controller */
+#define ATMEL_ID_AIC_IRQ	49	/* IRQ Interrupt ID */
+#define ATMEL_ID_SFC		50	/* Fuse Controller */
+#define ATMEL_ID_SECURAM	51	/* Secure RAM */
+#define ATMEL_ID_QSPI0		52	/* QSPI0 */
+#define ATMEL_ID_QSPI1		53	/* QSPI1 */
+#define ATMEL_ID_I2SC0		54	/* Inter-IC Sound Controller 0 */
+#define ATMEL_ID_I2SC1		55	/* Inter-IC Sound Controller 1 */
+#define ATMEL_ID_CAN0_INT0	56	/* MCAN 0 Interrupt0 */
+#define ATMEL_ID_CAN1_INT0	57	/* MCAN 1 Interrupt0 */
+/* 58 */
+#define ATMEL_ID_CLASSD		59	/* Audio Class D Amplifier */
+#define ATMEL_ID_SFR		60	/* Special Function Register */
+#define ATMEL_ID_SAIC		61	/* Secured AIC */
+#define ATMEL_ID_AIC		62	/* Advanced Interrupt Controller */
+#define ATMEL_ID_L2CC		63	/* L2 Cache Controller */
+#define ATMEL_ID_CAN0_INT1	64	/* MCAN 0 Interrupt1 */
+#define ATMEL_ID_CAN1_INT1	65	/* MCAN 1 Interrupt1 */
+#define ATMEL_ID_GMAC_Q1	66	/* GMAC Queue 1 Interrupt */
+#define ATMEL_ID_GMAC_Q2	67	/* GMAC Queue 2 Interrupt */
+#define ATMEL_ID_PIOB		68	/* Parallel I/O Controller B */
+#define ATMEL_ID_PIOC		69	/* Parallel I/O Controller C */
+#define ATMEL_ID_PIOD		70	/* Parallel I/O Controller D */
+#define ATMEL_ID_SDMMC0_TIMER	71	/* Secure Data Memory Card Controller 0 (TIMER) */
+#define ATMEL_ID_SDMMC1_TIMER	72	/* Secure Data Memory Card Controller 1 (TIMER) */
+/* 73 */
+#define ATMEL_ID_SYS		74	/* System Controller Interrupt */
+#define ATMEL_ID_ACC		75	/* Analog Comparator */
+#define ATMEL_ID_RXLP		76	/* UART Low-Power */
+#define ATMEL_ID_SFRBU		77	/* Special Function Register BackUp */
+#define ATMEL_ID_CHIPID		78	/* Chip ID */
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_LCDC		0xf0000000
+#define ATMEL_BASE_XDMAC1	0xf0004000
+#define ATMEL_BASE_MPDDRC	0xf000c000
+#define ATMEL_BASE_XDMAC0	0xf0010000
+#define ATMEL_BASE_PMC		0xf0014000
+#define ATMEL_BASE_QSPI0	0xf0020000
+#define ATMEL_BASE_QSPI1	0xf0024000
+#define ATMEL_BASE_SPI0		0xf8000000
+#define ATMEL_BASE_GMAC		0xf8008000
+#define ATMEL_BASE_TC0		0xf800c000
+#define ATMEL_BASE_TC1		0xf8010000
+#define ATMEL_BASE_HSMC		0xf8014000
+#define ATMEL_BASE_UART0	0xf801c000
+#define ATMEL_BASE_UART1	0xf8020000
+#define ATMEL_BASE_UART2	0xf8024000
+#define ATMEL_BASE_TWI0		0xf8028000
+#define ATMEL_BASE_SYSC		0xf8048000
+#define ATMEL_BASE_SPI1		0xfc000000
+#define ATMEL_BASE_UART3	0xfc008000
+#define ATMEL_BASE_UART4	0xfc00c000
+#define ATMEL_BASE_TWI1		0xfc028000
+#define ATMEL_BASE_UDPHS	0xfc02c000
+
+#define ATMEL_BASE_PIOA		0xfc038000
+
+#define ATMEL_CHIPID_CIDR	0xfc069000
+#define ATMEL_CHIPID_EXID	0xfc069004
+
+/*
+ * Address Memory Space
+ */
+#define ATMEL_BASE_DDRCS		0x20000000
+#define ATMEL_BASE_QSPI0_AES_MEM	0x90000000
+#define ATMEL_BASE_QSPI1_AES_MEM	0x98000000
+#define ATMEL_BASE_SDMMC0		0xa0000000
+#define ATMEL_BASE_SDMMC1		0xb0000000
+#define ATMEL_BASE_QSPI0_MEM		0xd0000000
+#define ATMEL_BASE_QSPI1_MEM		0xd8000000
+
+/*
+ * Internal Memories
+ */
+#define ATMEL_BASE_UDPHS_FIFO	0x00300000	/* USB Device HS controller */
+#define ATMEL_BASE_OHCI		0x00400000	/* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI		0x00500000	/* USB Host controller (EHCI) */
+
+/*
+ * SYSC Spawns
+ */
+#define ATMEL_BASE_RSTC		ATMEL_BASE_SYSC
+#define ATMEL_BASE_SHDWC	(ATMEL_BASE_SYSC + 0x10)
+#define ATMEL_BASE_PIT		(ATMEL_BASE_SYSC + 0x30)
+#define ATMEL_BASE_WDT		(ATMEL_BASE_SYSC + 0x40)
+#define ATMEL_BASE_SCKC		(ATMEL_BASE_SYSC + 0x50)
+#define ATMEL_BASE_RTC		(ATMEL_BASE_SYSC + 0xb0)
+
+/*
+ * Other misc definitions
+ */
+#define ATMEL_BASE_PMECC	(ATMEL_BASE_HSMC + 0x70)
+#define ATMEL_BASE_PMERRLOC	(ATMEL_BASE_HSMC + 0x500)
+
+#define ATMEL_BASE_PIOB		(ATMEL_BASE_PIOA + 0x40)
+#define ATMEL_BASE_PIOC		(ATMEL_BASE_PIOB + 0x40)
+#define ATMEL_BASE_PIOD		(ATMEL_BASE_PIOC + 0x40)
+
+#define ATMEL_PIO_PORTS		4
+#define CPU_HAS_PCR
+#define CPU_HAS_H32MXDIV
+
+/* SAMA5D2 series chip id definitions */
+#define ARCH_ID_SAMA5D2		0x8a5c08c0
+#define ARCH_EXID_SAMA5D21CU	0x0000005a
+#define ARCH_EXID_SAMA5D22CU	0x00000059
+#define ARCH_EXID_SAMA5D22CN	0x00000069
+#define ARCH_EXID_SAMA5D23CU	0x00000058
+#define ARCH_EXID_SAMA5D24CX	0x00000004
+#define ARCH_EXID_SAMA5D24CU	0x00000014
+#define ARCH_EXID_SAMA5D26CU	0x00000012
+#define ARCH_EXID_SAMA5D27CU	0x00000011
+#define ARCH_EXID_SAMA5D27CN	0x00000021
+#define ARCH_EXID_SAMA5D28CU	0x00000010
+#define ARCH_EXID_SAMA5D28CN	0x00000020
+
+#define cpu_is_sama5d2()	(get_chip_id() == ARCH_ID_SAMA5D2)
+
+/* PIT Timer(PIT_PIIR) */
+#define CONFIG_SYS_TIMER_COUNTER	0xf804803c
+
+/* No PMECC Galois table in ROM */
+#define NO_GALOIS_TABLE_IN_ROM
+
+#ifndef __ASSEMBLY__
+unsigned int get_chip_id(void);
+unsigned int get_extension_chip_id(void);
+unsigned int has_lcdc(void);
+char *get_cpu_name(void);
+#endif
+
+#endif
diff --git a/board/atmel/sama5d2_xplained/Kconfig b/board/atmel/sama5d2_xplained/Kconfig
new file mode 100644
index 0000000..55712e9
--- /dev/null
+++ b/board/atmel/sama5d2_xplained/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_SAMA5D2_XPLAINED
+
+config SYS_BOARD
+	default "sama5d2_xplained"
+
+config SYS_VENDOR
+	default "atmel"
+
+config SYS_SOC
+	default "at91"
+
+config SYS_CONFIG_NAME
+	default "sama5d2_xplained"
+
+endif
diff --git a/board/atmel/sama5d2_xplained/MAINTAINERS b/board/atmel/sama5d2_xplained/MAINTAINERS
new file mode 100644
index 0000000..ff9c86f
--- /dev/null
+++ b/board/atmel/sama5d2_xplained/MAINTAINERS
@@ -0,0 +1,7 @@
+SAMA5D2 XPLAINED BOARD
+M:	Wenyou Yang <wenyou.yang at atmel.com>
+S:	Maintained
+F:	board/atmel/sama5d2_xplained/
+F:	include/configs/sama5d2_xplained.h
+F:	configs/sama5d2_xplained_mmc_defconfig
+F:	configs/sama5d2_xplained_spiflash_defconfig
diff --git a/board/atmel/sama5d2_xplained/Makefile b/board/atmel/sama5d2_xplained/Makefile
new file mode 100644
index 0000000..420870b
--- /dev/null
+++ b/board/atmel/sama5d2_xplained/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2015 Atmel Corporation
+#		     Wenyou Yang <wenyou.yang at atmel.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += sama5d2_xplained.o
diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
new file mode 100644
index 0000000..03f4b43
--- /dev/null
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Wenyou.Yang <wenyou.yang at atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <atmel_hlcdc.h>
+#include <lcd.h>
+#include <mmc.h>
+#include <net.h>
+#include <netdev.h>
+#include <spi.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/atmel_pio4.h>
+#include <asm/arch/atmel_usba_udc.h>
+#include <asm/arch/atmel_sdhci.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sama5d2.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 0);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1);
+}
+
+static void board_spi0_hw_init(void)
+{
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 14, 0);
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 15, 0);
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 16, 0);
+
+	atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1);
+
+	at91_periph_clk_enable(ATMEL_ID_SPI0);
+}
+
+static void board_usb_hw_init(void)
+{
+	atmel_pio4_set_pio_output(AT91_PIO_PORTB, 9, 1);
+	atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1);
+}
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	.vl_col = 480,
+	.vl_row = 272,
+	.vl_clk = 9000000,
+	.vl_bpix = LCD_BPP,
+	.vl_tft = 1,
+	.vl_hsync_len = 41,
+	.vl_left_margin = 2,
+	.vl_right_margin = 2,
+	.vl_vsync_len = 11,
+	.vl_upper_margin = 2,
+	.vl_lower_margin = 2,
+	.mmio = ATMEL_BASE_LCDC,
+};
+
+/* No power up/down pin for the LCD pannel */
+void lcd_enable(void)	{ /* Empty! */ }
+void lcd_disable(void)	{ /* Empty! */ }
+
+__weak unsigned int has_lcdc(void)
+{
+	return 1;
+}
+
+static void board_lcd_hw_init(void)
+{
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0);	/* LCDPWM */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0);	/* LCDDISP */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0);	/* LCDVSYNC */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0);	/* LCDHSYNC */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTD,  0, 0);	/* LCDPCK */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTD,  1, 0);	/* LCDDEN */
+
+	/* LCDDAT0 */
+	/* LCDDAT1 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* LCDDAT2 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* LCDDAT3 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0);	/* LCDDAT4 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0);	/* LCDDAT5 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* LCDDAT6 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0);	/* LCDDAT7 */
+
+	/* LCDDAT8 */
+	/* LCDDAT9 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0);	/* LCDDAT10 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0);	/* LCDDAT11 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0);	/* LCDDAT12 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0);	/* LCDDAT13 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0);	/* LCDDAT14 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0);	/* LCDDAT15 */
+
+	/* LCDD16 */
+	/* LCDD17 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0);	/* LCDDAT18 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0);	/* LCDDAT19 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0);	/* LCDDAT20 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0);	/* LCDDAT21 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDDAT22 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDDAT23 */
+
+	at91_periph_clk_enable(ATMEL_ID_LCDC);
+}
+
+#ifdef CONFIG_LCD_INFO
+void lcd_show_board_info(void)
+{
+	ulong dram_size;
+	int i;
+	char temp[32];
+
+	lcd_printf("%s\n", U_BOOT_VERSION);
+	lcd_printf("2015 ATMEL Corp\n");
+	lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
+		   strmhz(temp, get_cpu_clk_rate()));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+
+	lcd_printf("%ld MB SDRAM\n", dram_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_LCD */
+
+static void board_gmac_hw_init(void)
+{
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 14, 0);	/* GTXCK */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 15, 0);	/* GTXEN */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 16, 0);	/* GRXDV */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 17, 0);	/* GRXER */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 18, 0);	/* GRX0 */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 19, 0);	/* GRX1 */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 20, 0);	/* GTX0 */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 21, 0);	/* GTX1 */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 22, 0);	/* GMDC */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 23, 0);	/* GMDIO */
+
+	at91_periph_clk_enable(ATMEL_ID_GMAC);
+}
+
+static void board_sdhci0_hw_init(void)
+{
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 0, 0);	/* SDMMC0_CK */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 1, 0);	/* SDMMC0_CMD */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 2, 0);	/* SDMMC0_DAT0 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 3, 0);	/* SDMMC0_DAT1 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 4, 0);	/* SDMMC0_DAT2 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 5, 0);	/* SDMMC0_DAT3 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 6, 0);	/* SDMMC0_DAT4 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 7, 0);	/* SDMMC0_DAT5 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 8, 0);	/* SDMMC0_DAT6 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 9, 0);	/* SDMMC0_DAT7 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 10, 0);	/* SDMMC0_RSTN */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* SDMMC0_VDDSEL */
+
+	at91_periph_clk_enable(ATMEL_ID_SDMMC0);
+	at91_enable_periph_generated_clk(ATMEL_ID_SDMMC0);
+}
+
+static void board_sdhci1_hw_init(void)
+{
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 18, 0);	/* SDMMC1_DAT0 */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 19, 0);	/* SDMMC1_DAT1 */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 20, 0);	/* SDMMC1_DAT2 */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 21, 0);	/* SDMMC1_DAT3 */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 22, 0);	/* SDMMC1_CK */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 27, 0);	/* SDMMC1_RSTN */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 28, 0);	/* SDMMC1_CMD */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 30, 0);	/* SDMMC1_CD */
+
+	at91_periph_clk_enable(ATMEL_ID_SDMMC1);
+	at91_enable_periph_generated_clk(ATMEL_ID_SDMMC1);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_ATMEL_SDHCI0
+	atmel_sdhci_init((void *)ATMEL_BASE_SDMMC0, ATMEL_ID_SDMMC0);
+#endif
+#ifdef CONFIG_ATMEL_SDHCI1
+	atmel_sdhci_init((void *)ATMEL_BASE_SDMMC1, ATMEL_ID_SDMMC1);
+#endif
+
+	return 0;
+}
+
+static void board_uart1_hw_init(void)
+{
+	atmel_pio4_set_a_periph(AT91_PIO_PORTD, 2, 1);	/* URXD1 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTD, 3, 0);	/* UTXD1 */
+
+	at91_periph_clk_enable(ATMEL_ID_UART1);
+}
+
+int board_early_init_f(void)
+{
+	at91_periph_clk_enable(ATMEL_ID_PIOA);
+	at91_periph_clk_enable(ATMEL_ID_PIOB);
+	at91_periph_clk_enable(ATMEL_ID_PIOC);
+	at91_periph_clk_enable(ATMEL_ID_PIOD);
+
+	board_uart1_hw_init();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_ATMEL_SPI
+	board_spi0_hw_init();
+#endif
+#ifdef CONFIG_ATMEL_SDHCI
+#ifdef CONFIG_ATMEL_SDHCI0
+	board_sdhci0_hw_init();
+#endif
+#ifdef CONFIG_ATMEL_SDHCI1
+	board_sdhci1_hw_init();
+#endif
+#endif
+#ifdef CONFIG_MACB
+	board_gmac_hw_init();
+#endif
+#ifdef CONFIG_LCD
+	board_lcd_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+	board_usb_hw_init();
+#endif
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	at91_udp_hw_init();
+#endif
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00);
+#endif
+
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	usba_udc_probe(&pdata);
+#ifdef CONFIG_USB_ETH_RNDIS
+	usb_eth_initialize(bis);
+#endif
+#endif
+
+	return rc;
+}
diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
new file mode 100644
index 0000000..c1dcbef
--- /dev/null
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -0,0 +1,11 @@
+CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
+CONFIG_TARGET_SAMA5D2_XPLAINED=y
+CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC"
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_SPI_FLASH=y
diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig
new file mode 100644
index 0000000..0271e8e
--- /dev/null
+++ b/configs/sama5d2_xplained_spiflash_defconfig
@@ -0,0 +1,11 @@
+CONFIG_ARM=y
+CONFIG_ARCH_AT91=y
+CONFIG_TARGET_SAMA5D2_XPLAINED=y
+CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH"
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_LOADS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
+# CONFIG_CMD_FPGA is not set
+CONFIG_SPI_FLASH=y
diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
new file mode 100644
index 0000000..ae5ba3d
--- /dev/null
+++ b/include/configs/sama5d2_xplained.h
@@ -0,0 +1,122 @@
+/*
+ * Configuration file for the SAMA5D2 Xplained Board.
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Wenyou Yang <wenyou.yang at atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* No NOR flash, this definition should put before common header */
+#define CONFIG_SYS_NO_FLASH
+
+#include "at91-sama5_common.h"
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_UART1
+#define CONFIG_USART_ID			ATMEL_ID_UART1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_SIZE		0x20000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
+
+#undef CONFIG_AT91_GPIO
+#define CONFIG_ATMEL_PIO4
+
+/* SerialFlash */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI
+#define CONFIG_ATMEL_SPI0
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED		30000000
+#endif
+
+/* NAND flash */
+#undef CONFIG_CMD_NAND
+
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_SDHCI
+#define CONFIG_ATMEL_SDHCI
+#define CONFIG_ATMEL_SDHCI0
+#define CONFIG_ATMEL_SDHCI1
+#define CONFIG_SUPPORT_EMMC_BOOT
+#endif
+
+/* USB */
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ATMEL
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
+#define CONFIG_USB_STORAGE
+#endif
+
+/* USB device */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_ATMEL_USBA
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_RNDIS
+#define CONFIG_USBNET_MANUFACTURER      "Atmel SAMA5D2 XPlained"
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/* Ethernet Hardware */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_MACB_SEARCH_PHY
+
+/* LCD */
+/* #define CONFIG_LCD */
+
+#ifdef CONFIG_LCD
+#define LCD_BPP				LCD_COLOR16
+#define LCD_OUTPUT_BPP                  24
+#define CONFIG_LCD_LOGO
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_HLCD
+#define CONFIG_ATMEL_LCD_RGB565
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#endif
+
+#ifdef CONFIG_SYS_USE_MMC
+
+/* bootstrap + u-boot + env in sd card */
+#undef FAT_ENV_DEVICE_AND_PART
+#undef CONFIG_BOOTCOMMAND
+
+#define FAT_ENV_DEVICE_AND_PART	"1"
+#define CONFIG_BOOTCOMMAND	"fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; " \
+				"fatload mmc 1:1 0x22000000 zImage; " \
+				"bootz 0x22000000 - 0x21000000"
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTARGS \
+	"console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait"
+
+#endif
+
+#endif
-- 
1.7.9.5



More information about the U-Boot mailing list