[U-Boot] [PATCH v4 4/6] cgtqmx6eval: Add SPL support

Otavio Salvador otavio.salvador at ossystems.com.br
Thu Oct 29 12:15:19 CET 2015


On Thu, Oct 29, 2015 at 9:07 AM, Stefano Babic <sbabic at denx.de> wrote:
> On 29/10/2015 11:58, Otavio Salvador wrote:
>> On Thu, Oct 29, 2015 at 8:53 AM, Stefano Babic <sbabic at denx.de> wrote:
>>> Hi Otavio,
>>>
>>> On 29/10/2015 11:32, Otavio Salvador wrote:
>>>> Congatec has several MX6 boards based on quad, dual, dual-lite and solo.
>>>>
>>>> Add SPL support so that all the variants can be supported.
>>>>
>>>> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
>> ...
>>>> --- a/board/congatec/cgtqmx6eval/README
>>>> +++ b/board/congatec/cgtqmx6eval/README
>> ...
>>>> +=> sf update 0x12000000 0x400 0x10000
>>>> +
>>>> +=> tftp u-boot.img
>>>
>>> Just a nitpick. This assumes that loadaddr is set to 0x12000000, as it
>>> is in mx6_common.h. If value changes, it is not strictly correct. Maybe
>>> to avoid confusion, you can write "tftp 0x12000000 SPL" (explicitely
>>> address it) or you change sf update to use the loadaddr variable as "sf
>>> update ${loadaddr} 0x400 0x10000"
>>
>> Can you replace it with ${loadaddr} when applying or do you want a new
>> patch revision?
>
> Yes, of course - I'll do it, you do not need to repost it for this.

Bear in mind, this required Fabio's patches for SPI protection.

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750


More information about the U-Boot mailing list