[U-Boot] [PATCH v4 4/6] cgtqmx6eval: Add SPL support

[Stefano Babic]

On 29/10/2015 11:58, Otavio Salvador wrote:
> On Thu, Oct 29, 2015 at 8:53 AM, Stefano Babic <sbabic at denx.de> wrote:
>> Hi Otavio,
>>
>> On 29/10/2015 11:32, Otavio Salvador wrote:
>>> Congatec has several MX6 boards based on quad, dual, dual-lite and solo.
>>>
>>> Add SPL support so that all the variants can be supported.
>>>
>>> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
> ...
>>> --- a/board/congatec/cgtqmx6eval/README
>>> +++ b/board/congatec/cgtqmx6eval/README
> ...
>>> +=> sf update 0x12000000 0x400 0x10000
>>> +
>>> +=> tftp u-boot.img
>>
>> Just a nitpick. This assumes that loadaddr is set to 0x12000000, as it
>> is in mx6_common.h. If value changes, it is not strictly correct. Maybe
>> to avoid confusion, you can write "tftp 0x12000000 SPL" (explicitely
>> address it) or you change sf update to use the loadaddr variable as "sf
>> update ${loadaddr} 0x400 0x10000"
> 
> Can you replace it with ${loadaddr} when applying or do you want a new
> patch revision?

Yes, of course - I'll do it, you do not need to repost it for this.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================