[U-Boot] ls2085ardb not booting

[Scott Wood]

On Thu, 2015-08-27 at 21:37 -0500, Sun York-R58495 wrote:
> Scott,
> 
> Did you use u-boot.bin file? It is now u-boot-dtb.bin image.
> 
> York

That must have been it (though I'm currently trying on QDS, not RDB, due to 
board availability).  It would be nice if the name of the file that gets 
burned into a particular boot source didn't change based on internal 
implementation details...

-Scott

> 
> 
> -------- Original message --------
> From: Wood Scott-B07421
> Date:08/27/2015 4:32 PM (GMT-06:00)
> To: Sun York-R58495
> Cc: u-boot at lists.denx.de
> Subject: ls2085ardb not booting
> 
> I'm unable to boot ls2085ardb on the current tree.  I get no console 
> output.  
> v2015.07 gives some output, but hangs at:
> 
> > U-Boot 2015.07 (Aug 27 2015 - 16:24:43 -0500) LS2085A-RDB
> 
> > 
> 
> > Clock Configuration:
> >        CPU0(A57):1600 MHz  CPU1(A57):1600 MHz  CPU2(A57):1600 MHz  
> >        CPU3(A57):1600 MHz  CPU4(A57):1600 MHz  CPU5(A57):1600 MHz  
> >        CPU6(A57):1600 MHz  CPU7(A57):1600 MHz  
> >        Bus:      600  MHz  DDR:      1333.333 MHz     DP-DDR:   1333.333 
> MHz
> > Reset Configuration Word (RCW):
> >        00: 40282830 40400040 00000000 00000000
> >        10: 00000000 00200000 00200000 00000000
> >        20: 00c12980 00002580 00000000 00000000
> >        30: 00000e0b 00000000 00000000 00000000
> >        40: 00000000 00000000 00000000 00000000
> >        50: 00000000 00000000 00000000 00000000
> >        60: 00000000 00000000 00027000 00000000
> >        70: 412a0000 00000000 00000000 00000000
> > Board:  LS2085A-RDB, Board Arch: V1, Board version: C, boot from vBank: 4
> > FPGA: v1.18
> > SERDES1 Reference : Clock1 = 156.25MHz Clock2 = 156.25MHz
> > SERDES2 Reference : Clock1 = 100MHz Clock2 = 100MHz
> > I2C:   ready
> > DRAM:  Initializing DDR....using SPD
> > Detected UDIMM 18ASF1G72AZ-2G1A1 
> > Detected UDIMM 18ASF1G72AZ-2G1A1 
> > There is no rank on CS0 for controller 1.
> > Controler 1 timeout, debug_2 = 2100
> > Controler 1 timeout, debug_2 = 2500
> > Waiting for D_INIT timeout. Memory may not work.
> > DP-DDR:  Detected UDIMM 18ASF1G72AZ-2G1A1 
> > 19.5 GiB
> > DDR    15.5 GiB (DDR4, 64-bit, CL=9, ECC on)
> >        DDR Chip-Select Interleaving Mode: CS0+CS1
> > DP-DDR 4 GiB (DDR4, 32-bit, CL=9, ECC on)
> >        DDR Chip-Select Interleaving Mode: CS0+CS1
> The internal bringup branch does boot on the same board, with the same RCW.
> 
> -Scott
>