September 2015 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Tue Sep 1 00:23:49 CEST 2015
Ending: Wed Sep 30 23:30:49 CEST 2015
Messages: 2914

• [U-Boot] [PATCH v2 1/3] vf610: refactor DDRMC code   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH v2 2/3] I2C: mxc_i2c: make I2C1 and I2C2 optional   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH v2 3/3] vf610: add support for Phytec PCM052   Albert ARIBAUD (3ADEV)
• [U-Boot] [PATCH] arm: Correct comments in crt0.S for the recent SPL improvements   Albert ARIBAUD
• [U-Boot] [PATCH] arm: armv8 correct value passed to __asm_dcache_all   Albert ARIBAUD
• [U-Boot] [PATCH] semihosting: Improve ARMv7A support   Albert ARIBAUD
• [U-Boot] [PATCH v6] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] [PATCH] arm/asm: Data types defined for 64 bit Physical Address   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] ARM: cache: drop the empty dcache functions as we have it in lib/cache.c   Albert ARIBAUD
• [U-Boot] [PATCH v6] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Albert ARIBAUD
• [U-Boot] Disabling/Enabling the Data Cache   Albert ARIBAUD
• [U-Boot] [PATCH][v2] thermal: imx: add imx7d soc thermal support   Alonso Adrian
• [U-Boot] [PATCHv2] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Sinan Akman
• [U-Boot] [PATCHv2] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Sinan Akman
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Sinan Akman
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Sinan Akman
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Sinan Akman
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Sinan Akman
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Sinan Akman
• [U-Boot] [PATCH 01/13] imx: arch-mx6: add is_soc_type helper macro   Adrian Alonso
• [U-Boot] [PATCH 02/13] thermal: imx_thermal: rework driver to be reused   Adrian Alonso
• [U-Boot] [PATCH 03/13] arm: imx: common rework cache settings for imx6   Adrian Alonso
• [U-Boot] [PATCH 04/13] arm: imx: imx-common: init: move arch init common setup   Adrian Alonso
• [U-Boot] [PATCH 05/13] imx: system counter driver for imx7d and mx6ul   Adrian Alonso
• [U-Boot] [PATCH 06/13] imx: imx7d: initial arch level support   Adrian Alonso
• [U-Boot] [PATCH 07/13] imx: imx7d: clock control module support   Adrian Alonso
• [U-Boot] [PATCH 08/13] imx: imx7d: Add SoC system support   Adrian Alonso
• [U-Boot] [PATCH 09/13] arm: imx-common: init: extend init_aips to support imx7   Adrian Alonso
• [U-Boot] [PATCH 10/13] arm: imx-common: init: rework wdog settings for imx6/imx7   Adrian Alonso
• [U-Boot] [PATCH 11/13] thermal: imx: add imx7d soc thermal support   Adrian Alonso
• [U-Boot] [PATCH 12/13] imx: imx7d: add imx-common cpu support for imx7d   Adrian Alonso
• [U-Boot] [PATCH 13/13] imx: mx7dsabresd: Add support for MX7D SABRESD board   Adrian Alonso
• [U-Boot] [PATCH v2 01/13] imx: arch-mx6: add is_soc_type helper macro   Adrian Alonso
• [U-Boot] [PATCH v2 02/13] thermal: imx_thermal: rework driver to be reused   Adrian Alonso
• [U-Boot] [PATCH v2 03/13] arm: imx: common rework cache settings for imx6   Adrian Alonso
• [U-Boot] [PATCH v2 04/13] arm: imx: imx-common: init: move arch init common setup   Adrian Alonso
• [U-Boot] [PATCH v2 05/13] imx: system counter driver for imx7d and mx6ul   Adrian Alonso
• [U-Boot] [PATCH v2 06/13] imx: imx7d: initial arch level support   Adrian Alonso
• [U-Boot] [PATCH v2 07/13] imx: imx7d: clock control module support   Adrian Alonso
• [U-Boot] [PATCH v2 08/13] imx: imx7d: Add SoC system support   Adrian Alonso
• [U-Boot] [PATCH v2 09/13] arm: imx-common: init: extend init_aips to support imx7   Adrian Alonso
• [U-Boot] [PATCH v2 10/13] arm: imx-common: init: rework wdog settings for imx6/imx7   Adrian Alonso
• [U-Boot] [PATCH v2 11/13] thermal: imx: add imx7d soc thermal support   Adrian Alonso
• [U-Boot] [PATCH v2 12/13] imx: imx7d: add imx-common cpu support for imx7d   Adrian Alonso
• [U-Boot] [PATCH v2 13/13] imx: mx7dsabresd: Add support for MX7D SABRESD board   Adrian Alonso
• [U-Boot] [PATCH v3 13/13] imx: mx7dsabresd: Add support for MX7D SABRESD board   Adrian Alonso
• [U-Boot] [PATCH 1/3] imx: cpu: move common chip revision id's   Adrian Alonso
• [U-Boot] [PATCH 2/3] hab: rework support for imx6/imx7   Adrian Alonso
• [U-Boot] [PATCH 3/3] mx7dsabresd: add secure boot support   Adrian Alonso
• [U-Boot] [PATCH v2 1/5] imx: cpu: move common chip revision id's   Adrian Alonso
• [U-Boot] [PATCH v2 2/5] imx: hab: rework support for imx6/imx7   Adrian Alonso
• [U-Boot] [PATCH v2 3/5] imx: hab use unified rom section for mx6sx and mx6ul   Adrian Alonso
• [U-Boot] [PATCH v2 4/5] imx: hab add mx7 secure boot support   Adrian Alonso
• [U-Boot] [PATCH v2 5/5] mx7dsabresd: add secure boot support   Adrian Alonso
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Pantelis Antoniou
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Pantelis Antoniou
• [U-Boot] [PATCH] mmc: sdhci: Fix the SD clock stop sequence   Pantelis Antoniou
• [U-Boot] [PATCH V2 2/3] net: fec: do not access reserved register for i.MX6UL   Stefano Babic
• [U-Boot] [PATCH V2] mxc: ocotp fix hole in shadow registers   Stefano Babic
• [U-Boot] [PATCH] imx: vf610 add function get_cpu_rev   Stefano Babic
• [U-Boot] [PATCH] imx: vf610 add function get_cpu_rev   Stefano Babic
• [U-Boot] [PATCH V2] mxc: ocotp fix hole in shadow registers   Stefano Babic
• [U-Boot] [PATCH V2] imx: vf610 add get_cpu_rev   Stefano Babic
• [U-Boot] [PATCH 05/45] arm: Remove unmaintained davinci boards   Stefano Babic
• [U-Boot] [PATCH] ea20: Convert to generic board   Stefano Babic
• [U-Boot] [PATCH] mxs: mxsboot: fix endianess for sd boot images   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT   Stefano Babic
• [U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT   Stefano Babic
• [U-Boot] [PATCH v2 01/13] imx: arch-mx6: add is_soc_type helper macro   Stefano Babic
• [U-Boot] [PATCH v2 02/13] thermal: imx_thermal: rework driver to be reused   Stefano Babic
• [U-Boot] [PATCH v2 03/13] arm: imx: common rework cache settings for imx6   Stefano Babic
• [U-Boot] [PATCH v2 04/13] arm: imx: imx-common: init: move arch init common setup   Stefano Babic
• [U-Boot] [PATCH v2 05/13] imx: system counter driver for imx7d and mx6ul   Stefano Babic
• [U-Boot] [PATCH v2 06/13] imx: imx7d: initial arch level support   Stefano Babic
• [U-Boot] [PATCH v2 07/13] imx: imx7d: clock control module support   Stefano Babic
• [U-Boot] [PATCH v2 08/13] imx: imx7d: Add SoC system support   Stefano Babic
• [U-Boot] [PATCH v2 09/13] arm: imx-common: init: extend init_aips to support imx7   Stefano Babic
• [U-Boot] [PATCH v2 10/13] arm: imx-common: init: rework wdog settings for imx6/imx7   Stefano Babic
• [U-Boot] [PATCH v2 11/13] thermal: imx: add imx7d soc thermal support   Stefano Babic
• [U-Boot] [PATCH v2 12/13] imx: imx7d: add imx-common cpu support for imx7d   Stefano Babic
• [U-Boot] [PATCH v3 13/13] imx: mx7dsabresd: Add support for MX7D SABRESD board   Stefano Babic
• [U-Boot] [PATCH 1/2] Revert "imx: mx6: ddr correct tRFC and tXS"   Stefano Babic
• [U-Boot] [PATCH 2/2] imx: discard duplicated MXC_OCOTP and CMD_FUSE   Stefano Babic
• [U-Boot] [PATCH V2] imx: mx6ul: support mx6ul 9x9 evk board   Stefano Babic
• [U-Boot] [PATCH V2 0/4] cm-fx6 updates for Utilite   Stefano Babic
• [U-Boot] [PATCH 1/2] mx6: remove SYS_SOC from board Kconfig   Stefano Babic
• [U-Boot] [PATCH 2/2] imx: mx6 discard 'select CPU_V7' for different targets   Stefano Babic
• [U-Boot] [PATCH 1/4] thermal: imx_thermal: Do not print on error   Stefano Babic
• [U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH 2/3] imx: wdog: correct wcr register settings   Stefano Babic
• [U-Boot] [PATCH 1/3] imx-common: fix iomux settings   Stefano Babic
• [U-Boot] [PATCH 1/3] mx6ul_14x14_evk: Remove dead code   Stefano Babic
• [U-Boot] [PATCH 2/3] mx6ul_14x14_evk: Staticize when possible   Stefano Babic
• [U-Boot] [PATCH 3/3] mx6ul_14x14_evk: Remove get_board_rev()   Stefano Babic
• [U-Boot] [PATCH 1/5] mx7dsabresd: Staticize when possible   Stefano Babic
• [U-Boot] [PATCH 2/5] mx7dsabreasd: Remove dead code   Stefano Babic
• [U-Boot] [PATCH 3/5] mx7dsabresd: Include USB header   Stefano Babic
• [U-Boot] [PATCH 4/5] mx7dsabresd: Remove get_board_rev()   Stefano Babic
• [U-Boot] [PATCH 5/5] mx7dsabresd: Remove unused config option   Stefano Babic
• [U-Boot] [PATCH 1/2] imx: mx7: drop select CPU_V7 for board target   Stefano Babic
• [U-Boot] [PATCH 2/2] imx: mx7dsabresd: drom SYS_SOC from board Kconfig   Stefano Babic
• [U-Boot] [PATCH V3] mtd: nand: mxs check maximum ecc that platfrom supports   Stefano Babic
• [U-Boot] [PATCH] imx6, aristaintetos2: add me as maintainer   Stefano Babic
• [U-Boot] [PATCH 0/3] Pending patches for Congatec QMX6 SPL support   Stefano Babic
• [U-Boot] [PATCH 2/3] cgtqmx6eval: Add SPL support   Stefano Babic
• [U-Boot] [PATCH] imximage: fix commands other than write_data   Stefano Babic
• [U-Boot] Missing maintainer and status for imx6 boards   Stefano Babic
• [U-Boot] [PATCH] imximage: fix commands other than write_data   Stefano Babic
• [U-Boot] [PATCH 0/3] Pending patches for Congatec QMX6 SPL support   Stefano Babic
• [U-Boot] [PATCH 1/3] imx-common: fix iomux settings   Stefano Babic
• [U-Boot] SPI pending patches   Stefano Babic
• [U-Boot] [PATCH 1/3] imx-common: fix iomux settings   Stefano Babic
• [U-Boot] [PATCH V2 0/4] cm-fx6 updates for Utilite   Stefano Babic
• [U-Boot] [PATCH V2] imx-common: consider mux_ctrl_ofs when setting mux_mode   Stefano Babic
• [U-Boot] SPL boot with NAND on i.MX6 data abort   Stefano Babic
• [U-Boot] [PATCH V2] imx-common: consider mux_ctrl_ofs when setting mux_mode   Stefano Babic
• [U-Boot] [PATCH] imx: boards: Add maintainers info   Stefano Babic
• [U-Boot] [PATCH v2 1/4] imx: mx7: discard unused global variable   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] SPL boot with NAND on i.MX6 data abort   Stefano Babic
• [U-Boot] [PATCH 2/3] hab: rework support for imx6/imx7   Stefano Babic
• [U-Boot] u-boot built with gcc5 dies in memcpy()   Felipe Balbi
• [U-Boot] [PATCH 1/3][v3] Pointers in ESBC header made 32 bit   Aneesh Bansal
• [U-Boot] [PATCH 2/3][v3] Data types defined for 64 bit physical address   Aneesh Bansal
• [U-Boot] [PATCH 3/3][v3] crypto/fsl: SEC driver cleanup for 64 bit and endianness   Aneesh Bansal
• [U-Boot] fs: ext4: fix symlink read function   Suriyan Bhavani
• [U-Boot] [PATCH v3] Makefile: fix SOURCE_DATE_EPOCH for *BSD host   Andreas Bießmann
• [U-Boot] [PATCH v4 1/4] bitops: introduce BIT() definition   Andreas Bießmann
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Andreas Bießmann
• [U-Boot] [PATCH v4 1/4] bitops: introduce BIT() definition   Andreas Bießmann
• [U-Boot] [U-Boot,v3,1/2] at91: corvus: board updates   Andreas Bießmann
• [U-Boot] [U-Boot,v3,2/2] corvus, dfu: add dfu support   Andreas Bießmann
• [U-Boot] [U-Boot,v3] arm, at91: add axm extensions   Andreas Bießmann
• [U-Boot] [U-Boot,v3] taurus: board updates   Andreas Bießmann
• [U-Boot] [U-Boot, 1/1] arm: at91: convert meesc board to generic board   Andreas Bießmann
• [U-Boot] ARM: atmel: boards: use default CONFIG_SYS_PBSIZE   Andreas Bießmann
• [U-Boot] [U-Boot, v5, 1/3] usb: gadget: at91_udc: port linux driver at91_udc   Andreas Bießmann
• [U-Boot] [U-Boot, v5, 2/3] usb: gadget: at91_udc: add at91_udc into U-Boot   Andreas Bießmann
• [U-Boot] [U-Boot, v5, 3/3] at91, taurus, smartweb: add dfu support   Andreas Bießmann
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master   Andreas Bießmann
• [U-Boot] [PATCH] tools: gen_eth_addr: remove getpid() operation for the random seed   Andreas Bießmann
• [U-Boot] [PATCH] tools: gen_eth_addr: remove getpid() operation for the random seed   Andreas Bießmann
• [U-Boot] [PATCH v2] tools: gen_eth_addr: add getpid() to time(0) to avoid duplicated seed   Andreas Bießmann
• [U-Boot] [PATCH] arm, at91: small updates for the smartweb board   Andreas Bießmann
• [U-Boot] Trouble configuring DHCP vs. BOOTP   Michael Binder
• [U-Boot] [PATCH] fs: ext4: fix symlink read function   Gary Bisson
• [U-Boot] [PATCH] fs: ext4: fix symlink read function   Gary Bisson
• [U-Boot] fs: ext4: fix symlink read function   Gary Bisson
• [U-Boot] U-boot roadmap?   Blibbet
• [U-Boot] U-boot roadmap?   Blibbet
• [U-Boot] [PATCH 07/13] fastboot: Implement NAND backend   Boris Brezillon
• [U-Boot] [RFC] zynq: Add support for E3xx board.   Sören Brinkmann
• [U-Boot] please pull u-boot-arc master   Alexey Brodkin
• [U-Boot] [PATCH] arc: make AXS101 default platform   Alexey Brodkin
• [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Alexey Brodkin
• [U-Boot] [PATCH 2/4] mmc: dw_mmc: Zap endless timeout   Alexey Brodkin
• [U-Boot] [PATCH 2/4] mmc: dw_mmc: Zap endless timeout   Alexey Brodkin
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Alexey Brodkin
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Alexey Brodkin
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Alexey Brodkin
• [U-Boot] [PATCH] doc: Fix inconsistent filename in PXE config example   Stefan Bruens
• [U-Boot] Can someone upload u-boot 2015.10-rc2 to ftp://ftp.denx.de/pub/u-boot/ ? (NT)   Stefan Bruens
• [U-Boot] [PATCH] smsc95xx: Use zero length packets when RX fifo is empty   Stefan Bruens
• [U-Boot] [PATCH v2] net: Do not overwrite options found in overloaded 'file' field   Stefan Brüns
• [U-Boot] [PATCH v2] net: parse DHCP options from overloaded file/sname fields   Stefan Brüns
• [U-Boot] [PATCH] smsc95xx: Use zero length packets when RX fifo is empty   Stefan Brüns
• [U-Boot] [linux-sunxi] Re: [PATCH 3/6] sunxi: Add the R8 DTSI   Julian Calaby
• [U-Boot] [PATCH] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin   Ian Campbell
• [U-Boot] [PATCH 11/13] sunxi: Add support for android boot image   Ian Campbell
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Ian Campbell
• [U-Boot] [PATCH 11/13] sunxi: Add support for android boot image   Ian Campbell
• [U-Boot] [PATCH 11/13] sunxi: Add support for android boot image   Ian Campbell
• [U-Boot] [PATCH] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin   Ian Campbell
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Ian Campbell
• [U-Boot] [PATCH] sunxi: Add q8_a13_tablet defconfig and dts   Ian Campbell
• [U-Boot] [PATCH] sunxi: Add defconfig and dts for the pov protab2-ips9 tablet   Ian Campbell
• [U-Boot] [PATCH 1/2] sun4i: Add defconfig and dts for inet9f-rev03 based tablets   Ian Campbell
• [U-Boot] [PATCH 2/2] sun4i: Add dts and defconfig for iNet-1 based tablets   Ian Campbell
• [U-Boot] [PATCH] sunxi: Rename A10s-Wobo-i5_defconfig to Wobo_i5_defconfig   Ian Campbell
• [U-Boot] [RFC PATCH 1/2] sunxi: retrieve FEL-provided values to environment variables   Ian Campbell
• [U-Boot] [RFC PATCH 2/2] sunxi: add "fel" boot target   Ian Campbell
• [U-Boot] [PATCH] sunxi: Tweak various memory addresses   Ian Campbell
• [U-Boot] [PATCH 5/7] sunxi: Simplify spl board_init_f function   Ian Campbell
• [U-Boot] [PATCH 6/7] sunxi: Enable CONFIG_SPL_STACK_R   Ian Campbell
• [U-Boot] [PATCH 7/7] sunxi: Switch to using malloc_simple for the spl   Ian Campbell
• [U-Boot] [PATCH 6/7] sunxi: Enable CONFIG_SPL_STACK_R   Ian Campbell
• [U-Boot] [PATCH 6/7] sunxi: Enable CONFIG_SPL_STACK_R   Ian Campbell
• [U-Boot] Compiling u-boot (sunxi/next)   Ian Campbell
• [U-Boot] [PATCH 3/6] sunxi: Add the R8 DTSI   Ian Campbell
• [U-Boot] [PATCH v2] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin   Ian Campbell
• [U-Boot] [PATCH v2] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin   Ian Campbell
• [U-Boot] [PATCH v2] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin   Ian Campbell
• [U-Boot] [PATCH 3/6] sunxi: Add the R8 DTSI   Ian Campbell
• [U-Boot] [PATCH] sunxi: mmc: Fix clk-delay settings   Ian Campbell
• [U-Boot] [PATCH] sunxi: mmc: Fix clk-delay settings   Ian Campbell
• [U-Boot] [PATCH] sunxi: mmc: Fix clk-delay settings   Ian Campbell
• [U-Boot] [PATCH v2] sunxi: mmc: Fix clk-delay settings   Ian Campbell
• [U-Boot] [PATCH] sunxi: Add generic defconfigs for A33 Q8 tablets with 1024x600 / 800x480 LCD   Ian Campbell
• [U-Boot] [PATCH] arndale: Apply Cortex-A15 errata #773022 and #774769   Ian Campbell
• [U-Boot] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH   Vagrant Cascadian
• [U-Boot] [Reproducible-builds] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH   Vagrant Cascadian
• [U-Boot] [PATCH 1/2] ARM: tegra124: Clear IDDQ when enabling PLLC   Nicolas Chauvet
• [U-Boot] [PATCH 0/5] nios2: add device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH 1/5] nios2: permit device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH 2/5] nios2: enable device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH 3/5] nios2: revert _end symbol in link script   Thomas Chou
• [U-Boot] [PATCH 4/5] nios2: initialize stack earlier in startup   Thomas Chou
• [U-Boot] [PATCH 5/5] nios2: relocate dtb for separated device tree   Thomas Chou
• [U-Boot] [PATCH 5/5] nios2: relocate dtb for separated device tree   Thomas Chou
• [U-Boot] [PATCH v2 0/8] nios2: add device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH v2 1/8] nios2: permit device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH v2 2/8] nios2: move altera_pio_init to board_early_init_r   Thomas Chou
• [U-Boot] [PATCH v2 3/8] nios2: BSS should be cleared only after board_init_f   Thomas Chou
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Thomas Chou
• [U-Boot] [PATCH v2 5/8] nios2: remove gp assignments in link script   Thomas Chou
• [U-Boot] [PATCH v2 6/8] nios2: define _end in link script   Thomas Chou
• [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command   Thomas Chou
• [U-Boot] [PATCH v2 8/8] nios2: enable device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH] net: altera_tse: Zap unused variable   Thomas Chou
• [U-Boot] [PATCH 1/2] nios2: Switch to generic timer   Thomas Chou
• [U-Boot] [PATCH 1/2] nios2: Switch to generic timer   Thomas Chou
• [U-Boot] [PATCH v2 2/8] nios2: move altera_pio_init to board_early_init_r   Thomas Chou
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Thomas Chou
• [U-Boot] [PATCH v3 5/8] nios2: remove gp assignments in link script   Thomas Chou
• [U-Boot] [PATCH v3 6/8] nios2: define _end in link script   Thomas Chou
• [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command   Thomas Chou
• [U-Boot] [PATCH v2 0/8] nios2: add device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH v2 8/8] nios2: enable device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH] nios2: configure STATUS_LED_BOOT   Thomas Chou
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Thomas Chou
• [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command   Thomas Chou
• [U-Boot] [PATCH] nios2: configure STATUS_LED_BOOT   Thomas Chou
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Thomas Chou
• [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command   Thomas Chou
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Thomas Chou
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Thomas Chou
• [U-Boot] [PATCH v4 0/7] nios2: add device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH v4 1/7] nios2: permit device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH v4 2/7] nios2: move altera_pio_init to board_early_init_r   Thomas Chou
• [U-Boot] [PATCH v4 3/7] nios2: BSS should be cleared only after board_init_f   Thomas Chou
• [U-Boot] [PATCH v4 4/7] nios2: enlarge the code relocation range   Thomas Chou
• [U-Boot] [PATCH v4 5/7] nios2: remove gp assignments in link script   Thomas Chou
• [U-Boot] [PATCH v4 6/7] nios2: define _end in link script   Thomas Chou
• [U-Boot] [PATCH v4 7/7] nios2: enable device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH 1/2] nios2: Switch to generic timer   Thomas Chou
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Thomas Chou
• [U-Boot] [PATCH] nios2: move command line configuration to Kconfig   Thomas Chou
• [U-Boot] [PATCH] nios2: enable CONFIG_NET_RANDOM_ETHADDR   Thomas Chou
• [U-Boot] [PATCH v4 1/7] nios2: permit device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH v4 2/7] nios2: move altera_pio_init to board_early_init_r   Thomas Chou
• [U-Boot] [PATCH v4 3/7] nios2: BSS should be cleared only after board_init_f   Thomas Chou
• [U-Boot] [PATCH v4 4/7] nios2: enlarge the code relocation range   Thomas Chou
• [U-Boot] [PATCH v4 5/7] nios2: remove gp assignments in link script   Thomas Chou
• [U-Boot] [PATCH v4 6/7] nios2: define _end in link script   Thomas Chou
• [U-Boot] [PATCH v4 7/7] nios2: enable device tree control of U-Boot   Thomas Chou
• [U-Boot] [PATCH] nios2: enable Driver Model   Thomas Chou
• [U-Boot] [PATCH 2/2] nios2: Split timer code into timer.c   Thomas Chou
• [U-Boot] [PATCH 1/2] nios2: Switch to generic timer   Thomas Chou
• [U-Boot] [PATCH] nios2: enable Driver Model   Thomas Chou
• [U-Boot] [PATCH V2 1/2] nios2: Switch to generic timer   Thomas Chou
• [U-Boot] [PATCH 2/2] nios2: Split timer code into timer.c   Thomas Chou
• [U-Boot] [PATCH v4 0/7] nios2: add device tree control of U-Boot   Thomas Chou
• [U-Boot] DM: uclass for timer   Thomas Chou
• [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command   Thomas Chou
• [U-Boot] [PATCH] nios2: zap dly_clks   Thomas Chou
• [U-Boot] [PATCH] nios2: zap version_string   Thomas Chou
• [U-Boot] [PATCH 1/2] nios2: call board_init_f_mem   Thomas Chou
• [U-Boot] [PATCH 2/2] nios2: enable malloc() pool before relocation   Thomas Chou
• [U-Boot] DM: uclass for timer   Thomas Chou
• [U-Boot] [PATCH 1/2] nios2: remap and translate reg address in device tree   Thomas Chou
• [U-Boot] [PATCH 2/2] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v2 0/3] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v2 1/3] nios2: map physical address to uncached virtual address   Thomas Chou
• [U-Boot] [PATCH v2 2/3] nios2: remove bridges in device tree   Thomas Chou
• [U-Boot] [PATCH v2 3/3] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH 1/2] nios2: remap and translate reg address in device tree   Thomas Chou
• [U-Boot] [PATCH 1/2] nios2: remap and translate reg address in device tree   Thomas Chou
• [U-Boot] [PATCH v3 0/2] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v3 1/2] nios2: map physical address to uncached virtual address   Thomas Chou
• [U-Boot] [PATCH v3 2/2] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v2] dm: core: Enable optional use of fdt_translate_address()   Thomas Chou
• [U-Boot] [PATCH] nios2: configure STATUS_LED_BOOT   Thomas Chou
• [U-Boot] [PATCH] nios2: zap dly_clks   Thomas Chou
• [U-Boot] [PATCH] nios2: zap version_string   Thomas Chou
• [U-Boot] [PATCH 1/2] nios2: call board_init_f_mem   Thomas Chou
• [U-Boot] [PATCH 2/2] nios2: enable malloc() pool before relocation   Thomas Chou
• [U-Boot] [PATCH v3 1/2] nios2: map physical address to uncached virtual address   Thomas Chou
• [U-Boot] [PATCH v4] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH] nios2: convert altera_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v2] nios2: convert altera_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v5] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v5] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v5] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v5] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v5] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v5] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v6] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v3] nios2: convert altera_uart to driver model   Thomas Chou
• [U-Boot] [PATCH] spi : convert altera_spi to driver model   Thomas Chou
• [U-Boot] [PATCH] spi : convert altera_spi to driver model   Thomas Chou
• [U-Boot] [PATCH] spi: ignore set speed and mode if not available   Thomas Chou
• [U-Boot] [PATCH] spi : convert altera_spi to driver model   Thomas Chou
• [U-Boot] [PATCH] nios2: add clear and set bits macros   Thomas Chou
• [U-Boot] [PATCH v6] nios2: convert altera_jtag_uart to driver model   Thomas Chou
• [U-Boot] [PATCH v3] nios2: convert altera_uart to driver model   Thomas Chou
• [U-Boot] [PATCH] common: add CMD_GPIO to Kconfig   Thomas Chou
• [U-Boot] [PATCH] nios2 : convert altera_pio to driver model   Thomas Chou
• [U-Boot] [PATCH v2] nios2 : convert altera_pio to driver model   Thomas Chou
• [U-Boot] [PATCH] common: add CMD_GPIO to Kconfig   Thomas Chou
• [U-Boot] [PATCH v3] nios2 : convert altera_pio to driver model   Thomas Chou
• [U-Boot] [PATCH] nios2: convert nios2 cpu to driver model   Thomas Chou
• [U-Boot] [PATCH] common: add CMD_GPIO to Kconfig   Thomas Chou
• [U-Boot] [PATCH] spi : convert altera_spi to driver model   Thomas Chou
• [U-Boot] [PATCH 1/2] dm: implement a Timer uclass   Thomas Chou
• [U-Boot] [PATCH 2/2] nios2: convert altera timer to driver model   Thomas Chou
• [U-Boot] [PATCH] spi : convert altera_spi to driver model   Thomas Chou
• [U-Boot] [PATCH v2] nios2: convert nios2 cpu to driver model   Thomas Chou
• [U-Boot] [PATCH 1/2] dm: implement a Timer uclass   Thomas Chou
• [U-Boot] [PATCH v2] nios2: convert nios2 cpu to driver model   Thomas Chou
• [U-Boot] [PATCH 1/2] dm: implement a Miscellaneous uclass   Thomas Chou
• [U-Boot] [PATCH 2/2] nios2: convert altera sysid to driver model   Thomas Chou
• [U-Boot] [PATCH v2 1/2] dm: implement a Miscellaneous uclass   Thomas Chou
• [U-Boot] [PATCH v2 2/2] nios2: convert altera sysid to driver model   Thomas Chou
• [U-Boot] [PATCH v2 2/2] nios2: convert altera sysid to driver model   Thomas Chou
• [U-Boot] [PATCH v3 1/2] dm: implement a Miscellaneous uclass   Thomas Chou
• [U-Boot] [PATCH v3 2/2] nios2: convert altera sysid to driver model   Thomas Chou
• [U-Boot] [PATCH v3] nios2: convert nios2 cpu to driver model   Thomas Chou
• [U-Boot] [PATCH v2 1/2] dm: implement a Timer uclass   Thomas Chou
• [U-Boot] [PATCH v2 2/2] nios2: convert altera timer to driver model   Thomas Chou
• [U-Boot] [PATCH] nios2: add clear and set bits macros   Thomas Chou
• [U-Boot] [PATCH v2] nios2: add clear and set bits macros   Thomas Chou
• [U-Boot] [PATCH v4] nios2 : convert altera_pio to driver model   Thomas Chou
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Jaehoon Chung
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Jaehoon Chung
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Jaehoon Chung
• [U-Boot] [PATCH 0/4] Fix operation on Odroid devices   Jaehoon Chung
• [U-Boot] [PATCH 0/4] Fix operation on Odroid devices   Jaehoon Chung
• [U-Boot] [PATCH 0/4] Fix operation on Odroid devices   Jaehoon Chung
• [U-Boot] [PATCH V2 04/11] Exynos5422/5800: set cpu id to 0x5422   Jaehoon Chung
• [U-Boot] [PATCH 2/4] exynos: Fix passing of errors in exynos_mmc_init()   Jaehoon Chung
• [U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init()   Jaehoon Chung
• [U-Boot] [PATCH 0/3] Fix fdt 'reg' parsing and unbreak Odroid U3   Jaehoon Chung
• [U-Boot] [PATCH V2 3/3] mach-exynos: clock: restore calling dead exynos4_get_mmc_clk()   Jaehoon Chung
• [U-Boot] [PATCH v4 11/16] common/env_flags.c: Add function to validate a MAC address   Codrin Ciubotariu
• [U-Boot] [PATCH v4 12/16] drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953   Codrin Ciubotariu
• [U-Boot] [RFC] zynq: Add support for E3xx board.   Peter Crosthwaite
• [U-Boot] Condition in bootcmd to run bootz else bootm   DaveKucharczyk
• [U-Boot] Condition in bootcmd to run bootz else bootm   DaveKucharczyk
• [U-Boot] Trying to load old kernel with new u-boot   DaveKucharczyk
• [U-Boot] Trying to load old kernel with new u-boot   DaveKucharczyk
• [U-Boot] Trying to load old kernel with new u-boot   DaveKucharczyk
• [U-Boot] Question: Full benifit of the .itb   Brian_Brelsford at Dell.com
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Wolfgang Denk
• [U-Boot] [ANN] U-Boot v2015.10-rc3 released   Wolfgang Denk
• [U-Boot] [PATCH] tools: gen_eth_addr: remove getpid() operation for the random seed   Wolfgang Denk
• [U-Boot] [PATCH] tools: gen_eth_addr: remove getpid() operation for the random seed   Wolfgang Denk
• [U-Boot] [PATCH v2] tools: gen_eth_addr: add getpid() to time(0) to avoid duplicated seed   Wolfgang Denk
• [U-Boot] ## Application terminated, rc = 0x1   Wolfgang Denk
• [U-Boot] [PATCH v7 2/6] spi: cadence_qspi: fix indirect read/write start address   Wolfgang Denk
• [U-Boot] [PATCH v7 1/6] spi: cadence_qspi: move trigger base configuration in init   Wolfgang Denk
• [U-Boot] [PATCH v7 3/6] spi: cadence_qspi: fix base trigger address & transfer start address   Wolfgang Denk
• [U-Boot] [PATCH v7 6/6] spi: cadence_qspi: get fifo width from device tree   Wolfgang Denk
• [U-Boot] [PATCH v7 3/6] spi: cadence_qspi: fix base trigger address & transfer start address   Wolfgang Denk
• [U-Boot] [PATCH v7 1/6] spi: cadence_qspi: move trigger base configuration in init   Wolfgang Denk
• [U-Boot] [PATCH v7 1/6] spi: cadence_qspi: move trigger base configuration in init   Wolfgang Denk
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Wolfgang Denk
• [U-Boot] ## Application terminated, rc = 0x1   Wolfgang Denk
• [U-Boot] "go" does not work for uImage - was: ## Application terminated, rc = 0x1   Wolfgang Denk
• [U-Boot] [PATCH] Revert "env_eeprom: Assign default environment during board_init_f"   Ludger Dreier
• [U-Boot] [PATCH] Revert "env_eeprom: Assign default environment during board_init_f"   Ludger Dreier
• [U-Boot] [PATCH v2] Revert "env_eeprom: Assign default environment during board_init_f"   Ludger Dreier
• [U-Boot] "Embedding" default script with uboot image   Zatkovský Dušan
• [U-Boot] "Embedding" default script with uboot image   Zatkovský Dušan
• [U-Boot] [PATCH] arm: mvebu: Fix internal register config on A38x   Dirk Eibach
• [U-Boot] arm: mvebu: u-boot does not start on db-88f6820-gp   Stefan Eichenberger
• [U-Boot] arm: mvebu: u-boot does not start on db-88f6820-gp   Stefan Eichenberger
• [U-Boot] arm: mvebu: u-boot does not start on db-88f6820-gp   Stefan Eichenberger
• [U-Boot] arm: mvebu: u-boot does not start on db-88f6820-gp   Stefan Eichenberger
• [U-Boot] arm: mvebu: u-boot does not start on db-88f6820-gp   Stefan Eichenberger
• [U-Boot] [PATCH 13/13] imx: mx7dsabresd: Add support for MX7D SABRESD board   Fabio Estevam
• [U-Boot] [PATCH 1/5] spi_sf: Skip the erasing of protected sectors   Fabio Estevam
• [U-Boot] [PATCH 1/4] thermal: imx_thermal: Do not print on error   Fabio Estevam
• [U-Boot] [PATCH 2/4] imx-common: cpu: Do not print on invalid temperature   Fabio Estevam
• [U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT   Fabio Estevam
• [U-Boot] [PATCH 4/4] mx6ul_14x14_evk: Add a README file   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx6slevk: Remove CONFIG_SPL_FAT_SUPPORT   Fabio Estevam
• [U-Boot] [PATCH 2/2] mx6sxsabresd: Remove CONFIG_SPL_FAT_SUPPORT   Fabio Estevam
• [U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT   Fabio Estevam
• [U-Boot] [PATCH 1/7] mx6ul_14x14_evk: Remove CONFIG_CMD_FUSE option   Fabio Estevam
• [U-Boot] [PATCH 2/7] cgtqmx6eval: Remove CONFIG_CMD_FUSE option   Fabio Estevam
• [U-Boot] [PATCH 3/7] mx6ul_14x14_evk: Remove CONFIG_SYS_GENERIC_BOARD   Fabio Estevam
• [U-Boot] [PATCH 4/7] mx6ul_14x14_evk: Remove unused config option   Fabio Estevam
• [U-Boot] [PATCH 5/7] mx6ul_14x14_evk: Do not undef config options   Fabio Estevam
• [U-Boot] [PATCH 6/7] mx6ul_14x14_evk: Remove CONFIG_FEC_DMA_MINALIGN   Fabio Estevam
• [U-Boot] [PATCH 7/7] mx6ul_14x14_evk: Use the default CONFIG_SYS_PBSIZE   Fabio Estevam
• [U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT   Fabio Estevam
• [U-Boot] Fastboot is not detected   Fabio Estevam
• [U-Boot] [PATCH 3/8] ARM: hikey: Use linux/sizes.h for malloc size   Fabio Estevam
• [U-Boot] Fastboot is not detected   Fabio Estevam
• [U-Boot] Fastboot is not detected   Fabio Estevam
• [U-Boot] [PATCH V2] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Fabio Estevam
• [U-Boot] Fastboot is not detected   Fabio Estevam
• [U-Boot] [PATCH] mx6sabre_common: Add Fastboot support   Fabio Estevam
• [U-Boot] [PATCH] pcie_imx: Use 'ms' for miliseconds   Fabio Estevam
• [U-Boot] [PATCH v2] pcie_imx: Use 'ms' for milliseconds   Fabio Estevam
• [U-Boot] [PATCH 1/2] nitrogen6x: Fix the error handling in board_eth_init()   Fabio Estevam
• [U-Boot] [PATCH 2/2] ot1200: Fix the error handling in board_eth_init()   Fabio Estevam
• [U-Boot] [PATCH 1/2] tqma6_mba6: Fix the error handling in board_eth_init()   Fabio Estevam
• [U-Boot] [PATCH 2/2] udoo: Fix the error handling in board_eth_init()   Fabio Estevam
• [U-Boot] [PATCH 1/5] mx7dsabresd: Staticize when possible   Fabio Estevam
• [U-Boot] [PATCH 2/5] mx7dsabreasd: Remove dead code   Fabio Estevam
• [U-Boot] [PATCH 3/5] mx7dsabresd: Include USB header   Fabio Estevam
• [U-Boot] [PATCH 4/5] mx7dsabresd: Remove get_board_rev()   Fabio Estevam
• [U-Boot] [PATCH 5/5] mx7dsabresd: Remove unused config option   Fabio Estevam
• [U-Boot] mx7dsabresd board does not reset   Fabio Estevam
• [U-Boot] mx7dsabresd board does not reset   Fabio Estevam
• [U-Boot] [PATCH 1/3] imx-common: fix iomux settings   Fabio Estevam
• [U-Boot] [PATCH 2/3] imx: wdog: correct wcr register settings   Fabio Estevam
• [U-Boot] [PATCH 3/3] imx: mx7dsabresd set wdog SRS bit   Fabio Estevam
• [U-Boot] [PATCH 2/3] imx: wdog: correct wcr register settings   Fabio Estevam
• [U-Boot] [PATCH 1/3] mx6ul_14x14_evk: Remove dead code   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx6ul_14x14_evk: Staticize when possible   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6ul_14x14_evk: Remove get_board_rev()   Fabio Estevam
• [U-Boot] [PATCH 3/4] imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE   Fabio Estevam
• [U-Boot] [PATCH] imximage: fix commands other than write_data   Fabio Estevam
• [U-Boot] [PATCH 3/4] imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE   Fabio Estevam
• [U-Boot] Trying to load old kernel with new u-boot   Fabio Estevam
• [U-Boot] Trying to load old kernel with new u-boot   Fabio Estevam
• [U-Boot] [PATCH 1/3] cgtqmx6eval: Add fastboot support   Fabio Estevam
• [U-Boot] [PATCH 2/3] cgtqmx6eval: Add SPL support   Fabio Estevam
• [U-Boot] [PATCH 3/3] iomux-v3: Take MX6D in consideration for imx_iomux_v3_setup_pad()   Fabio Estevam
• [U-Boot] Flashing SPI NOR via DFU   Fabio Estevam
• [U-Boot] [PATCH 4/4] dfu: add SF backend   Fabio Estevam
• [U-Boot] [PATCH 4/4] dfu: add SF backend   Fabio Estevam
• [U-Boot] [PATCH 4/4] dfu: add SF backend   Fabio Estevam
• [U-Boot] [PATCH 4/4] dfu: add SF backend   Fabio Estevam
• [U-Boot] [PATCH 4/4] dfu: add SF backend   Fabio Estevam
• [U-Boot] [PATCH] dfu: dfu_sf: Use the erase sector size for erase operations   Fabio Estevam
• [U-Boot] Flashing SPI NOR via DFU   Fabio Estevam
• [U-Boot] Disabling/Enabling the Data Cache   Fabio Estevam
• [U-Boot] [PATCH] dfu: dfu_sf: Take the start address into account   Fabio Estevam
• [U-Boot] [PATCH] mx6sabre_common: Add DFU support   Fabio Estevam
• [U-Boot] [PATCH] dfu: dfu_sf: Take the start address into account   Fabio Estevam
• [U-Boot] [PATCH] dfu: dfu_sf: Take the start address into account   Fabio Estevam
• [U-Boot] [PATCH 1/2] bitops: Add support for order_base_2()   Fabio Estevam
• [U-Boot] [PATCH 2/2] spi: Add SPI NOR protection mechanism   Fabio Estevam
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Fabio Estevam
• [U-Boot] [PATCH v2 1/2] bitops: Add support for order_base_2()   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] spi: Add SPI NOR protection mechanism   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] spi: Add SPI NOR protection mechanism   Fabio Estevam
• [U-Boot] [PATCH v2 2/2] spi: Add SPI NOR protection mechanism   Fabio Estevam
• [U-Boot] [PATCH v3 1/2] bitops: Add support for order_base_2()   Fabio Estevam
• [U-Boot] [PATCH v3 2/2] spi: Add SPI NOR protection mechanism   Fabio Estevam
• [U-Boot] [PATCH v4 1/3] bitops: Add support for order_base_2()   Fabio Estevam
• [U-Boot] [PATCH v4 2/3] spi: sf_ops: Add SPI protection mechanism from the kernel   Fabio Estevam
• [U-Boot] [PATCH v4 3/3] spi: Add SPI NOR protection mechanism   Fabio Estevam
• [U-Boot] [PATCH v3 2/2] spi: Add SPI NOR protection mechanism   Fabio Estevam
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Fabio Estevam
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Fabio Estevam
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Fabio Estevam
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Fabio Estevam
• [U-Boot] [PATCH V2 2/3] net: fec: do not access reserved register for i.MX6UL   Peng Fan
• [U-Boot] [PATCH V2] mxc: ocotp fix hole in shadow registers   Peng Fan
• [U-Boot] [PATCH] imx: vf610 add function get_cpu_rev   Peng Fan
• [U-Boot] [RFC PATCH v2] arm: cache_v7: fix dcache invalidation   Peng Fan
• [U-Boot] [PATCH 1/2] Revert "imx: mx6: ddr correct tRFC and tXS"   Peng Fan
• [U-Boot] [PATCH 2/2] imx: discard duplicated MXC_OCOTP and CMD_FUSE   Peng Fan
• [U-Boot] [PATCH V2] mxc: ocotp fix hole in shadow registers   Peng Fan
• [U-Boot] [PATCH] imx: vf610 add function get_cpu_rev   Peng Fan
• [U-Boot] [PATCH V2] imx: vf610 add get_cpu_rev   Peng Fan
• [U-Boot] [PATCH] imx: mx6ul: support mx6ul 9x9 evk board   Peng Fan
• [U-Boot] [PATCH] imx: mx6ul: support mx6ul 9x9 evk board   Peng Fan
• [U-Boot] [PATCH V2] imx: mx6ul: support mx6ul 9x9 evk board   Peng Fan
• [U-Boot] "tftp: adjust settings to be suitable for 100Mbit ethernet" breaks imx6   Peng Fan
• [U-Boot] [PATCH] imx: mx6: correct enable_fec_anatop_clock   Peng Fan
• [U-Boot] "tftp: adjust settings to be suitable for 100Mbit ethernet" breaks imx6   Peng Fan
• [U-Boot] [PATCH 1/2] mx6: remove SYS_SOC from board Kconfig   Peng Fan
• [U-Boot] [PATCH 2/2] imx: mx6 discard 'select CPU_V7' for different targets   Peng Fan
• [U-Boot] [PATCH V3] mtd: nand: mxs check maximum ecc that platfrom supports   Peng Fan
• [U-Boot] [PATCH] driver: misc: correct Kconfig entry   Peng Fan
• [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Peng Fan
• [U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT   Peng Fan
• [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Peng Fan
• [U-Boot] [PATCH] driver: misc: correct Kconfig entry   Peng Fan
• [U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT   Peng Fan
• [U-Boot] [PATCH 1/7] mx6ul_14x14_evk: Remove CONFIG_CMD_FUSE option   Peng Fan
• [U-Boot] [PATCH 3/7] mx6ul_14x14_evk: Remove CONFIG_SYS_GENERIC_BOARD   Peng Fan
• [U-Boot] [PATCH 5/7] mx6ul_14x14_evk: Do not undef config options   Peng Fan
• [U-Boot] [PATCH 4/7] mx6ul_14x14_evk: Remove unused config option   Peng Fan
• [U-Boot] [PATCH 6/7] mx6ul_14x14_evk: Remove CONFIG_FEC_DMA_MINALIGN   Peng Fan
• [U-Boot] [PATCH 00/11] imx: mx6: support lcdif   Peng Fan
• [U-Boot] [PATCH 01/11] mxs: add parameter base_addr for mxs_set_lcdclk   Peng Fan
• [U-Boot] [PATCH 02/11] sandisk: sfp: correct function name   Peng Fan
• [U-Boot] [PATCH 03/11] xfi3: correct function name   Peng Fan
• [U-Boot] [PATCH 04/11] imx: imx-common: move lcdif structure and macro definition to imx-common   Peng Fan
• [U-Boot] [PATCH 05/11] imx: mx6: fix register address   Peng Fan
• [U-Boot] [PATCH 06/11] imx: mx6: crm_reg: add LCDIF related macros   Peng Fan
• [U-Boot] [PATCH 07/11] imx: mx6: add clock api for lcdif   Peng Fan
• [U-Boot] [PATCH 08/11] imx: mx6ul_14x14_evk: support lcdif display   Peng Fan
• [U-Boot] [PATCH 09/11] video: mxsfb: introduce lcdif_power_down   Peng Fan
• [U-Boot] [PATCH 10/11] imx: mx6: implement reset_misc   Peng Fan
• [U-Boot] [PATCH 11/11] imx: imx-common: power down lcdif before boot os   Peng Fan
• [U-Boot] mx7dsabresd board does not reset   Peng Fan
• [U-Boot] [PATCH 1/3] imx-common: fix iomux settings   Peng Fan
• [U-Boot] [PATCH 2/3] imx: wdog: correct wcr register settings   Peng Fan
• [U-Boot] [PATCH 3/3] imx: mx7dsabresd set wdog SRS bit   Peng Fan
• [U-Boot] [PATCH 1/4] imx: mx7: discard unused global variable   Peng Fan
• [U-Boot] [PATCH 2/4] imx-common: wrap boot_mode_apply with CONFIG_CMD_BMODE   Peng Fan
• [U-Boot] [PATCH 3/4] imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE   Peng Fan
• [U-Boot] [PATCH 4/4] imx: fix coding style   Peng Fan
• [U-Boot] [PATCH 2/3] imx: wdog: correct wcr register settings   Peng Fan
• [U-Boot] [PATCH 1/2] imx: mx7: drop select CPU_V7 for board target   Peng Fan
• [U-Boot] [PATCH 2/2] imx: mx7dsabresd: drom SYS_SOC from board Kconfig   Peng Fan
• [U-Boot] [PATCH 3/4] imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE   Peng Fan
• [U-Boot] [PATCH v2 1/4] imx: mx7: discard unused global variable   Peng Fan
• [U-Boot] [PATCH v2 2/4] imx-common: wrap boot_mode_apply with CONFIG_CMD_BMODE   Peng Fan
• [U-Boot] [PATCH v2 3/4] imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE   Peng Fan
• [U-Boot] [PATCH v2 4/4] imx: fix coding style   Peng Fan
• [U-Boot] [PATCH 1/3] imx-common: fix iomux settings   Peng Fan
• [U-Boot] [PATCH] imx: boards: Add maintainers info   Peng Fan
• [U-Boot] [PATCH 1/3] imx-common: fix iomux settings   Peng Fan
• [U-Boot] [PATCH] imx-common: consider mux_ctrl_ofs when setting mux_mode   Peng Fan
• [U-Boot] [PATCH 1/3] imx-common: fix iomux settings   Peng Fan
• [U-Boot] [PATCH] imx-common: consider mux_ctrl_ofs when setting mux_mode   Peng Fan
• [U-Boot] [PATCH V2] imx-common: consider mux_ctrl_ofs when setting mux_mode   Peng Fan
• [U-Boot] [RFC] Adding support for NI Ettus Research USRP E3XX series   Moritz Fischer
• [U-Boot] [RFC] zynq: Add support for E3xx board.   Moritz Fischer
• [U-Boot] [PATCH] checkpatch.pl: Fix checkpatch.pl warnings with Perl 5.22   Moritz Fischer
• [U-Boot] Relocation issue - need help!   Andy Fleming
• [U-Boot] [PATCH] Convert omap3_logic to ti_omap3_common.h   Adam Ford
• [U-Boot] [PATCH] api_storage: Fix non-first storage device enumeration   Andreas Färber
• [U-Boot] [PATCH 0/2] Enhance Odroid board   Guillaume GARDET
• [U-Boot] [PATCH 1/2] odroid: replace 'fatload' with 'load' to be able to use EXT* partitions   Guillaume GARDET
• [U-Boot] [PATCH 2/2] odroid: Add boot script (boot.scr) support   Guillaume GARDET
• [U-Boot] [ANN] U-Boot v2015.10-rc3 released   Guillaume Gardet
• [U-Boot] [PATCH] arm: ls102xa: enable snooping for CAAM transactions   Horia Geantă
• [U-Boot] [PATCH 04/13] dm: serial: Deal with stdout-path with an alias   Simon Glass
• [U-Boot] [PATCH 07/13] arm: zynq: Use separate device tree instead of embedded   Simon Glass
• [U-Boot] [PATCH 00/13] dm: arm: zynq: Convert serial driver to driver model   Simon Glass
• [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Simon Glass
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Simon Glass
• [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4   Simon Glass
• [U-Boot] Question: Full benifit of the .itb   Simon Glass
• [U-Boot] [PATCH 1/3] x86: ifdtool: Support checking region overlap before U-Boot   Simon Glass
• [U-Boot] [PATCH 2/3] x86: doc: Change to use CONFIG_VGA_BIOS_ADDR   Simon Glass
• [U-Boot] [PATCH 3/3] x86: bayleybay: Change default vga bios rom address   Simon Glass
• [U-Boot] [PATCH v3] x86: panther: Add PCI and video configuration   Simon Glass
• [U-Boot] [PATCH v3 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Simon Glass
• [U-Boot] [PATCH v3 2/9] dm: eth: Do not print misleading "Net Initialization Skipped"   Simon Glass
• [U-Boot] [PATCH v3 3/9] dm: test: Add a new test case for dm_test_eth_rotate   Simon Glass
• [U-Boot] [PATCH v3 4/9] dm: eth: Correctly detect alias in eth_get_dev_by_name()   Simon Glass
• [U-Boot] [PATCH v3 5/9] x86: crownbay: Convert to use CONFIG_DM_USB   Simon Glass
• [U-Boot] [PATCH v3 6/9] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000   Simon Glass
• [U-Boot] [PATCH v3 7/9] net: pch_gbe: Convert to driver model   Simon Glass
• [U-Boot] [PATCH v3 8/9] net: pch_gbe: Add Kconfig option   Simon Glass
• [U-Boot] [PATCH v3 9/9] x86: crownbay: Enable CONFIG_PCH_GBE   Simon Glass
• [U-Boot] [PATCH 1/2] x86: coreboot: Convert to use more dm drivers   Simon Glass
• [U-Boot] [PATCH 2/2] x86: bayleybay: Convert to use more dm drivers   Simon Glass
• [U-Boot] [PATCH] Revert "patman: use -D option for git format-patch"   Simon Glass
• [U-Boot] [PATCH 1/8] x86: quark: Make host bridge (b.d.f=0.0.0) visible   Simon Glass
• [U-Boot] [PATCH 3/8] x86: Convert to use driver model pci on quark/galileo   Simon Glass
• [U-Boot] [PATCH 4/8] x86: galileo: Convert to use CONFIG_DM_USB   Simon Glass
• [U-Boot] [PATCH 5/8] net: designware: Fix build warnings   Simon Glass
• [U-Boot] [PATCH 6/8] net: designware: Add support to PCI designware devices   Simon Glass
• [U-Boot] [PATCH 7/8] x86: Convert to use driver model eth on quark/galileo   Simon Glass
• [U-Boot] [PATCH 1/7] s5p: cpu_info: use defined CPU name if available   Simon Glass
• [U-Boot] [PATCH 3/7] Exynos5422/5800: set cpu id to 0x5422   Simon Glass
• [U-Boot] [PATCH 4/7] dm: pmic: add s2mps11 PMIC I/O driver   Simon Glass
• [U-Boot] [PATCH 5/7] odroid-xu3: enable s2mps11 PMIC support   Simon Glass
• [U-Boot] [PATCH 6/7] Exynos: add internal ADC driver   Simon Glass
• [U-Boot] [PATCH 7/7] exynos5-dt: add board detection for Odroid XU3/XU3L/XU4.   Simon Glass
• [U-Boot] [PATCH] dts: Add a comment about CONFIG_OF_EMBED being for local use   Simon Glass
• [U-Boot] [PATCH v3 0/4] x86: gpio: Tidy up GPIO driver   Simon Glass
• [U-Boot] [PATCH v3 1/4] dm: pci: Allow a PCI bus to be found without an alias   Simon Glass
• [U-Boot] [PATCH v3 2/4] gpio: Report errors when GPIOs cannot be read   Simon Glass
• [U-Boot] [PATCH v3 3/4] WIP: x86: gpio: Handle the case where reading a GPIO fails   Simon Glass
• [U-Boot] [PATCH v3 4/4] WIP: x86: gpio: Make sure that output GPIOs can be read   Simon Glass
• [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Simon Glass
• [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Simon Glass
• [U-Boot] [PATCH 6/8] net: designware: Add support to PCI designware devices   Simon Glass
• [U-Boot] [PATCH 2/2] fdt_support: Don't panic if unable to perform stdout fixup   Simon Glass
• [U-Boot] DM: Problem with DT bus translation dev_get_addr()   Simon Glass
• [U-Boot] [PATCH v5 29/41] rockchip: Add SPI driver   Simon Glass
• [U-Boot] [PATCH v6 29/41] rockchip: Add SPI driver   Simon Glass
• [U-Boot] [PATCH] net: change the env name to use const   Simon Glass
• [U-Boot] [PATCH v3] buildman: Improve the config comparison feature   Simon Glass
• [U-Boot] [PATCH 2/2] fdt_support: Don't panic if unable to perform stdout fixup   Simon Glass
• [U-Boot] [PATCH v3 1/4] dm: pci: Allow a PCI bus to be found without an alias   Simon Glass
• [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Simon Glass
• [U-Boot] dm gpio   Simon Glass
• [U-Boot] [PATCH 01/15] pinctrl: uniphier: add UniPhier pinctrl core support   Simon Glass
• [U-Boot] [PATCH 10/15] ARM: dts: uniphier: prepare device trees to use pinctrl in SPL   Simon Glass
• [U-Boot] [PATCH 12/15] ARM: uniphier: drop ad-hoc early pin-muxing settings   Simon Glass
• [U-Boot] [PATCH 13/15] ARM: uniphier: drop DCC micro support card support   Simon Glass
• [U-Boot] [PATCH 15/15] ARM: uniphier: change the external bus address mapping   Simon Glass
• [U-Boot] [PATCH v2 0/8] arm: Tidy up early init   Simon Glass
• [U-Boot] [PATCH 07/13] arm: zynq: Use separate device tree instead of embedded   Simon Glass
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Simon Glass
• [U-Boot] [PATCH] Move malloc_cache_aligned() to malloc.h   Simon Glass
• [U-Boot] [PATCH 2/2] fdt_support: Don't panic if unable to perform stdout fixup   Simon Glass
• [U-Boot] [PATCH 01/15] pinctrl: uniphier: add UniPhier pinctrl core support   Simon Glass
• [U-Boot] [PATCH V2 1/4] drivers: Introduce a simplified remoteproc framework   Simon Glass
• [U-Boot] [PATCH V2 2/4] remoteproc: Introduce a sandbox dummy driver   Simon Glass
• [U-Boot] [PATCH V2 3/4] sandbox: Introduce dummy remoteproc nodes   Simon Glass
• [U-Boot] [PATCH V2 4/4] test: Add basic tests for remoteproc   Simon Glass
• [U-Boot] [PATCH v2 01/11] x86: quark: Optimize MRC execution time   Simon Glass
• [U-Boot] [PATCH v2 02/11] x86: quark: Avoid chicken and egg problem   Simon Glass
• [U-Boot] [PATCH v2 03/11] x86: Enable PCIe controller on quark/galileo   Simon Glass
• [U-Boot] [PATCH v2 05/11] x86: quark: Add USB PHY initialization support   Simon Glass
• [U-Boot] [PATCH v2 08/11] dm: pci: Add an inline API to test if a device is on a PCI bus   Simon Glass
• [U-Boot] [PATCH v2 09/11] net: designware: Add support to PCI designware devices   Simon Glass
• [U-Boot] [PATCH v2 11/11] x86: quark: Add PCIe/USB static register programming after memory init   Simon Glass
• [U-Boot] [PATCH v2 2/2] fdt_support: Don't panic if stdout alias is missing   Simon Glass
• [U-Boot] [PATCH v1] common: Fix load and entry addresses in FIT image   Simon Glass
• [U-Boot] [PATCH 5/5] sbc8641d: enable and test CONFIG_SYS_GENERIC_BOARD   Simon Glass
• [U-Boot] What's purpose of DEV_FLAGS_SYSTEM and DEV_EXT_VIDEO?   Simon Glass
• [U-Boot] [PATCH 00/13] dm: arm: zynq: Convert serial driver to driver model   Simon Glass
• [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Simon Glass
• [U-Boot] [PATCH v2 1/2] Move malloc_cache_aligned() to its own header   Simon Glass
• [U-Boot] [PATCH v2 2/2] Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h header   Simon Glass
• [U-Boot] [PATCH v5 01/41] pinctrl: Add help text to Kconfig   Simon Glass
• [U-Boot] [PATCH v5 02/41] pinctrl: Add the concept of peripheral IDs   Simon Glass
• [U-Boot] [PATCH v5 03/41] dm: led: Tidy up SPL options for the led and led-gpio   Simon Glass
• [U-Boot] [PATCH v5 04/41] mmc: Support bypass mode with the get_mmc_clk() method   Simon Glass
• [U-Boot] [PATCH v5 05/41] dm: Improve handling of a missing uclass   Simon Glass
• [U-Boot] [PATCH v5 06/41] dm: Provide better debugging when a device fails to bind   Simon Glass
• [U-Boot] [PATCH v5 07/41] arm: reset: Avoid a build error when the reset uclass is enabled   Simon Glass
• [U-Boot] [PATCH v5 08/41] rockchip: Add serial support   Simon Glass
• [U-Boot] [PATCH v5 09/41] rockchip: Bring in RK3288 device tree file includes and bindings   Simon Glass
• [U-Boot] [PATCH v5 10/41] rockchip: rk3288: dts: Make core devices available early   Simon Glass
• [U-Boot] [PATCH v5 11/41] mkimage: Allow padding to any length   Simon Glass
• [U-Boot] [PATCH v5 12/41] mkimage: Allow the original file size to be recorded   Simon Glass
• [U-Boot] [PATCH v5 13/41] rockchip: Add the rkimage format to mkimage   Simon Glass
• [U-Boot] [PATCH v5 14/41] rockchip: Add support for the SD image   Simon Glass
• [U-Boot] [PATCH v5 15/41] rockchip: Add support for the SPI image   Simon Glass
• [U-Boot] [PATCH v5 16/41] rockchip: gpio: Add rockchip GPIO driver   Simon Glass
• [U-Boot] [PATCH v5 17/41] rockchip: Add basic peripheral and clock definitions   Simon Glass
• [U-Boot] [PATCH v5 18/41] power: Add support for ACT8846 PMIC   Simon Glass
• [U-Boot] [PATCH v5 19/41] power: regulator: Add a driver for ACT8846 regulators   Simon Glass
• [U-Boot] [PATCH v5 20/41] rockchip: rk3288: Add clock driver   Simon Glass
• [U-Boot] [PATCH v5 21/41] rockchip: rk3288: Add header files for PMU and GRF   Simon Glass
• [U-Boot] [PATCH v5 22/41] rockchip: rk3288: Add SoC reset driver   Simon Glass
• [U-Boot] [PATCH v5 23/41] rockchip: rk3288: Add a simple syscon driver   Simon Glass
• [U-Boot] [PATCH v5 24/41] rockchip: rk3288: Add pinctrl driver   Simon Glass
• [U-Boot] [PATCH v5 25/41] rockchip: rk3288: Add SDRAM init   Simon Glass
• [U-Boot] [PATCH v5 26/41] rockchip: Add an MMC driver   Simon Glass
• [U-Boot] [PATCH v6 29/41] rockchip: Add SPI driver   Simon Glass
• [U-Boot] [PATCH v5 27/41] rockchip: Add core SoC start-up code   Simon Glass
• [U-Boot] [PATCH v5 28/41] rockchip: Add I2C driver   Simon Glass
• [U-Boot] [PATCH v5 30/41] rockchip: Add basic support for firefly-rk3288   Simon Glass
• [U-Boot] [PATCH v5 31/41] rockchip: Add basic support for jerry   Simon Glass
• [U-Boot] [PATCH v5 32/41] rockchip: Add a simple README   Simon Glass
• [U-Boot] [PATCH v5 34/41] mmc: Probe DM based mmc devices in u-boot   Simon Glass
• [U-Boot] [PATCH v5 33/41] doc: Fix reference to Rock pro when Rock 2 is meant   Simon Glass
• [U-Boot] [PATCH v5 35/41] rockchip: Disable sdio mmc slot on rk3288-firefly   Simon Glass
• [U-Boot] [PATCH v5 36/41] rockchip: Turn off CONFIG_SPL_LED for firefly   Simon Glass
• [U-Boot] [PATCH v5 37/41] rockchip: Add config_distro_bootcmd support   Simon Glass
• [U-Boot] [PATCH v5 38/41] arm: Turn of d-cache before i-cache   Simon Glass
• [U-Boot] [PATCH v5 39/41] rockchip: Drop first 32kb of zeros from the rkSD image type   Simon Glass
• [U-Boot] [PATCH v5 40/41] rockchip: Update todo in README.rockchip   Simon Glass
• [U-Boot] [PATCH v5 41/41] rockchip: Put README image creation commands on one line   Simon Glass
• [U-Boot] Please pull u-boot-rockchip.git   Simon Glass
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Simon Glass
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Simon Glass
• [U-Boot] [PATCH v4 09/11] net: designware: Add support to PCI designware devices   Simon Glass
• [U-Boot] [PATCH v4 01/11] x86: quark: Optimize MRC execution time   Simon Glass
• [U-Boot] [PATCH v4 02/11] x86: quark: Avoid chicken and egg problem   Simon Glass
• [U-Boot] [PATCH v4 03/11] x86: Enable PCIe controller on quark/galileo   Simon Glass
• [U-Boot] [PATCH v4 04/11] x86: Convert to use driver model pci on quark/galileo   Simon Glass
• [U-Boot] [PATCH v4 05/11] x86: quark: Add USB PHY initialization support   Simon Glass
• [U-Boot] [PATCH v4 06/11] x86: galileo: Convert to use CONFIG_DM_USB   Simon Glass
• [U-Boot] [PATCH v4 07/11] net: designware: Fix build warnings   Simon Glass
• [U-Boot] [PATCH 4/6] drivers: net: cpsw: prepare driver for device model migration   Simon Glass
• [U-Boot] [PATCH 5/6] drivers: net: cpsw: convert driver to adopt device driver model   Simon Glass
• [U-Boot] [PATCH 1/6] drivers: of: add support for get device address based on index   Simon Glass
• [U-Boot] [PATCH 2/7] arm: mvebu: Do not call board_init_r() from board_init_f()   Simon Glass
• [U-Boot] [PATCH] dts: Add a comment about CONFIG_OF_EMBED being for local use   Simon Glass
• [U-Boot] [PATCH] dts: do not cut down pinctrl-0 and pinctrl-names for SPL full-pinctrl   Simon Glass
• [U-Boot] [PATCH v2] common: Fix load and entry addresses in FIT image   Simon Glass
• [U-Boot] [PATCH] dm: core: Enable optional use of fdt_translate_address()   Simon Glass
• [U-Boot] [PATCH] pinctrl: move dm_scan_fdt_node() out of pinctrl uclass   Simon Glass
• [U-Boot] [PATCH 1/5] nios2: permit device tree control of U-Boot   Simon Glass
• [U-Boot] [PATCH 2/5] nios2: enable device tree control of U-Boot   Simon Glass
• [U-Boot] [PATCH 3/5] nios2: revert _end symbol in link script   Simon Glass
• [U-Boot] [PATCH 4/5] nios2: initialize stack earlier in startup   Simon Glass
• [U-Boot] [PATCH 5/5] nios2: relocate dtb for separated device tree   Simon Glass
• [U-Boot] [PATCH v2 6/8] nios2: define _end in link script   Simon Glass
• [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command   Simon Glass
• [U-Boot] [PATCH v2] common: Fix load and entry addresses in FIT image   Simon Glass
• [U-Boot] [PATCH] pinctrl: move dm_scan_fdt_node() out of pinctrl uclass   Simon Glass
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Simon Glass
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Simon Glass
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Simon Glass
• [U-Boot] [PATCH v2] common: Fix load and entry addresses in FIT image   Simon Glass
• [U-Boot] [PATCH 00/13] dm: arm: zynq: Convert serial driver to driver model   Simon Glass
• [U-Boot] [PATCH v2 0/8] arm: Tidy up early init   Simon Glass
• [U-Boot] [PATCH] RFC: dm: Add proposed timeline and guide for porting serial drivers   Simon Glass
• [U-Boot] [PATCH v4 1/2] usb: zynqmp: Add XHCI driver support   Simon Glass
• [U-Boot] [PATCH] RFC: dm: Add proposed timeline and guide for porting serial drivers   Simon Glass
• [U-Boot] Any more patches for x86?   Simon Glass
• [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command   Simon Glass
• [U-Boot] [PATCH] fs: ext4: fix symlink read function   Simon Glass
• [U-Boot] [PATCH v5 5/9] arm: serial: Add ability to use pre-initialized UARTs   Simon Glass
• [U-Boot] [PATCH v5 6/9] armv8: cavium: Add the device tree for ThunderX   Simon Glass
• [U-Boot] [PATCH] driver: misc: correct Kconfig entry   Simon Glass
• [U-Boot] [PATCH 1/3] tpm: Move tpm_tis_i2c to tpm_i2c_infineon   Simon Glass
• [U-Boot] [PATCH v2 09/11] net: designware: Add support to PCI designware devices   Simon Glass
• [U-Boot] [PATCH 0/5] RFC: usb: Drop requirement for USB unbinding   Simon Glass
• [U-Boot] [PATCH 1/5] Revert "dm: usb: Rename usb_find_child to usb_find_emul_child"   Simon Glass
• [U-Boot] [PATCH 2/5] Revert "dm: usb: Use device_unbind_children to clean up usb devs on stop"   Simon Glass
• [U-Boot] [PATCH 3/5] Revert "dm: Export device_remove_children / device_unbind_children"   Simon Glass
• [U-Boot] [PATCH 4/5] dm: usb: Add support for USB keyboards with driver model   Simon Glass
• [U-Boot] [PATCH 5/5] dm: usb: Deprecate usb_get_dev_index()   Simon Glass
• [U-Boot] [PATCH 00/10] x86: Early debug enhancements   Simon Glass
• [U-Boot] [PATCH 01/10] x86: chromebook_link: Expand early malloc() memory   Simon Glass
• [U-Boot] [PATCH 02/10] malloc_simple: Add debug() information   Simon Glass
• [U-Boot] [PATCH 03/10] dm: pci: Tidy up auto-config error handling   Simon Glass
• [U-Boot] [PATCH 04/10] dm: pci: Correct a few debug() statements   Simon Glass
• [U-Boot] [PATCH 05/10] dm: pci: Adjust pci_find_and_bind_driver() to return -EPERM   Simon Glass
• [U-Boot] [PATCH 06/10] debug_uart: Adjust the declaration of debug_uart_init()   Simon Glass
• [U-Boot] [PATCH 07/10] debug_uart: Support board-specific UART initialisation   Simon Glass
• [U-Boot] [PATCH 08/10] debug_uart: Add an option to announce the debug UART   Simon Glass
• [U-Boot] [PATCH 09/10] x86: Init the debug UART if enabled   Simon Glass
• [U-Boot] [PATCH 10/10] x86: chromebook_link: Enable the debug UART   Simon Glass
• [U-Boot] [PATCH 00/28] dm: input: Move keyboard drivers to driver model   Simon Glass
• [U-Boot] [PATCH 01/28] dm: input: Create a keyboard uclass   Simon Glass
• [U-Boot] [PATCH 02/28] input: Add a device pointer to the input config   Simon Glass
• [U-Boot] [PATCH 03/28] input: Return -ENOSPC when there is not space   Simon Glass
• [U-Boot] [PATCH 04/28] input: Add the keycode translation tables separately   Simon Glass
• [U-Boot] [PATCH 05/28] cros_ec: Use udevice instead of cros_ec_dev for keyboard functions   Simon Glass
• [U-Boot] [PATCH 06/28] dm: stdio: Plumb in the new keyboard uclass   Simon Glass
• [U-Boot] [PATCH 07/28] dm: tegra: Convert keyboard driver to driver model   Simon Glass
• [U-Boot] [PATCH 08/28] dm: cros_ec: Convert cros_ec keyboard driver to driver model   Simon Glass
• [U-Boot] [PATCH 09/28] video: Drop unused console functions   Simon Glass
• [U-Boot] [PATCH 10/28] i8042: Use functions to handle register access   Simon Glass
• [U-Boot] [PATCH 11/28] i8042: Handle a duplicate power-on-reset response   Simon Glass
• [U-Boot] [PATCH 12/28] i8042: Adjust kbd_reset() to collect all failures   Simon Glass
• [U-Boot] [PATCH 13/28] i8042: Adjust keyboard init to assume success   Simon Glass
• [U-Boot] [PATCH 14/28] input: Correct keycode for Ctrl-Y   Simon Glass
• [U-Boot] [PATCH 15/28] input: Add a few more keyboard keycodes   Simon Glass
• [U-Boot] [PATCH 16/28] input: Add a function to add a keycode to the existing set   Simon Glass
• [U-Boot] [PATCH 17/28] input: Allow repeat filtering to be disabled   Simon Glass
• [U-Boot] [PATCH 18/28] input: Support the German keymap   Simon Glass
• [U-Boot] [PATCH 19/28] input: Adjust structure of code in process_modifier()   Simon Glass
• [U-Boot] [PATCH 20/28] input: Handle caps lock   Simon Glass
• [U-Boot] [PATCH 21/28] input: Allow updating of keyboard LEDs   Simon Glass
• [U-Boot] [PATCH 22/28] input: i8042: Convert to use the input library   Simon Glass
• [U-Boot] [PATCH 23/28] input: Add a Kconfig option for the i8042 keyboard   Simon Glass
• [U-Boot] [PATCH 24/28] x86: Add an i8042 device for boards that have it   Simon Glass
• [U-Boot] [PATCH 25/28] Drop CONFIG_ISA_KEYBOARD   Simon Glass
• [U-Boot] [PATCH 26/28] input: Convert i8042 to driver model   Simon Glass
• [U-Boot] [PATCH 27/28] video: input: Clean up after i8042 conversion   Simon Glass
• [U-Boot] [PATCH 28/28] input: Convert 'keyboard' driver to use input library   Simon Glass
• [U-Boot] [PATCH 2/5] net: designware: Add driver remove support   Simon Glass
• [U-Boot] [PATCH] arm: serial: Add debug UART capability to the pl01x driver   Simon Glass
• [U-Boot] [PATCH v2 09/11] net: designware: Add support to PCI designware devices   Simon Glass
• [U-Boot] [PATCH 5/8] x86: quark: Initialize thermal sensor properly   Simon Glass
• [U-Boot] [PATCH 4/8] x86: quark: Lock HMBOUND register before jumping to kernel   Simon Glass
• [U-Boot] [PATCH 3/8] x86: quark: Convert to use clrbits, setbits, clrsetbits macros   Simon Glass
• [U-Boot] [PATCH 1/8] x86: galileo: Enable random mac address for Quark   Simon Glass
• [U-Boot] [PATCH 2/8] x86: quark: Add clrbits, setbits, clrsetbits macros for message port access   Simon Glass
• [U-Boot] [PATCH 6/8] x86: galileo: Add PCIe root port IRQ routing   Simon Glass
• [U-Boot] [PATCH 7/8] x86: doc: Document some porting hints about Intel Quark   Simon Glass
• [U-Boot] [PATCH] RFC: dm: Add proposed timeline and guide for porting serial drivers   Simon Glass
• [U-Boot] [PATCH 00/45] arm: Remove boards that have not moved to generic board init   Simon Glass
• [U-Boot] [PATCH v3] common: Fix load and entry addresses in FIT image   Simon Glass
• [U-Boot] [PATCH] dm: core: Enable optional use of fdt_translate_address()   Simon Glass
• [U-Boot] [PATCH 3/5] net: pch_gbe: Add driver remove support   Simon Glass
• [U-Boot] [PATCH 1/5] net: mdio: Add mdio_free() and mdio_unregister() API   Simon Glass
• [U-Boot] [PATCH 4/5] dm: core: Remove the call to device_free()   Simon Glass
• [U-Boot] [PATCH 5/5] dm: core: Remove unnecessary codes in uclass_pre_remove_device()   Simon Glass
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Simon Glass
• [U-Boot] [PATCH] pinctrl: move dm_scan_fdt_node() out of pinctrl uclass   Simon Glass
• [U-Boot] [PATCH 8/8] x86: doc: Add DMI to the TODO list   Simon Glass
• [U-Boot] [PATCH] fs: ext4: fix symlink read function   Simon Glass
• [U-Boot] [PATCH] fdt: add new fdt address parsing functions   Simon Glass
• [U-Boot] [PATCH v2 1/2] arm: serial: Add debug UART capability to the pl01x driver   Simon Glass
• [U-Boot] [PATCH v2 2/2] arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output   Simon Glass
• [U-Boot] [PATCH 4/5] dm: usb: Add support for USB keyboards with driver model   Simon Glass
• [U-Boot] DM: uclass for timer   Simon Glass
• [U-Boot] [PATCH v4 08/11] dm: pci: Add an inline API to test if a device is on a PCI bus   Simon Glass
• [U-Boot] [PATCH v2 09/11] net: designware: Add support to PCI designware devices   Simon Glass
• [U-Boot] [PATCH 3/8] x86: Convert to use driver model pci on quark/galileo   Simon Glass
• [U-Boot] [PATCH v4 11/11] x86: quark: Add PCIe/USB static register programming after memory init   Simon Glass
• [U-Boot] [PATCH v4 08/11] dm: pci: Add an inline API to test if a device is on a PCI bus   Simon Glass
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
• [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Simon Glass
• [U-Boot] [PATCH v3 5/5] common: Enable fdt_support in SPL build   Simon Glass
• [U-Boot] [PATCH 4/5] dm: core: Remove the call to device_free()   Simon Glass
• [U-Boot] [PATCH] dm: core: Enable optional use of fdt_translate_address()   Simon Glass
• [U-Boot] [PATCH 4/5] dm: usb: Add support for USB keyboards with driver model   Simon Glass
• [U-Boot] [PATCH 4/5] dm: core: Remove the call to device_free()   Simon Glass
• [U-Boot] [PATCH 1/2] dm: core: Don't use pinctrl for the root device   Simon Glass
• [U-Boot] [PATCH 2/2] dm: test: Show the amount of leaked memory on error   Simon Glass
• [U-Boot] [PATCH 0/5] RFC: usb: Drop requirement for USB unbinding   Simon Glass
• [U-Boot] [PATCH] ARM: Kirkwood: enable generic board support for LaCie boards   Simon Glass
• [U-Boot] [PATCH 0/6] arm: Final removal of boards that have not moved to generic board init   Simon Glass
• [U-Boot] [PATCH 1/6] arm: Remove edb9315a board   Simon Glass
• [U-Boot] [PATCH 2/6] arm: Remove da830evm board   Simon Glass
• [U-Boot] [PATCH 3/6] arm: Remove wireless_space board   Simon Glass
• [U-Boot] [PATCH 4/6] arm: Drop old non-generic-board code   Simon Glass
• [U-Boot] [PATCH 5/6] Sort README.scrapyard   Simon Glass
• [U-Boot] [PATCH 6/6] scrapyard: Add lines for recently removed ARM boards   Simon Glass
• [U-Boot] Galileo instructions   Simon Glass
• [U-Boot] [PATCH 2/3] ti814x_evm: Switch to SYS_GENERIC_BOARD   Simon Glass
• [U-Boot] [PATCH 1/3] omap3_evm_common.h: Switch to SYS_GENERIC_BOARD   Simon Glass
• [U-Boot] [PATCH 3/3] ti816x: Switch to SYS_GENERIC_BOARD   Simon Glass
• [U-Boot] [PATCH 1/6] arm: Remove edb9315a board   Simon Glass
• [U-Boot] [PATCH 1/2] nios2: remap and translate reg address in device tree   Simon Glass
• [U-Boot] Galileo instructions   Simon Glass
• [U-Boot] Galileo instructions   Simon Glass
• [U-Boot] Galileo instructions   Simon Glass
• [U-Boot] [PATCH] x86: quark: Configure MTRR to enable cache   Simon Glass
• [U-Boot] Galileo instructions   Simon Glass
• [U-Boot] Pull-request: u-boot-spi/master   Simon Glass
• [U-Boot] [PATCH v5 1/4] dm: pci: Add an inline API to test if a device is on a PCI bus   Simon Glass
• [U-Boot] [PATCH v5 2/4] net: designware: Add support to PCI designware devices   Simon Glass
• [U-Boot] [PATCH] fdt: add new fdt address parsing functions   Simon Glass
• [U-Boot] Please pull u-boot-fdt.git   Simon Glass
• [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Simon Glass
• [U-Boot] [PATCH v5 1/4] dm: pci: Add an inline API to test if a device is on a PCI bus   Simon Glass
• [U-Boot] [PATCH v5 2/4] net: designware: Add support to PCI designware devices   Simon Glass
• [U-Boot] [PATCH v5 3/4] x86: Convert to use driver model eth on quark/galileo   Simon Glass
• [U-Boot] [PATCH v5 4/4] x86: quark: Add PCIe/USB static register programming after memory init   Simon Glass
• [U-Boot] [PATCH v2 1/8] x86: galileo: Enable random mac address for Quark   Simon Glass
• [U-Boot] [PATCH v2 2/8] x86: quark: Add clrbits, setbits, clrsetbits macros for message port access   Simon Glass
• [U-Boot] [PATCH v2 3/8] x86: quark: Convert to use clrbits, setbits, clrsetbits macros   Simon Glass
• [U-Boot] [PATCH v2 4/8] x86: quark: Lock HMBOUND register before jumping to kernel   Simon Glass
• [U-Boot] [PATCH v2 5/8] x86: quark: Initialize thermal sensor properly   Simon Glass
• [U-Boot] [PATCH v2 6/8] x86: galileo: Add PCIe root port IRQ routing   Simon Glass
• [U-Boot] [PATCH v2 7/8] x86: doc: Document some porting hints about Intel Quark   Simon Glass
• [U-Boot] [PATCH v2 8/8] x86: doc: Add DMI to the TODO list   Simon Glass
• [U-Boot] [PATCH] x86: quark: Configure MTRR to enable cache   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] Please pull u-boot-x86   Simon Glass
• [U-Boot] [PATCH 1/8] ARM: hikey: Update README with various corrections   Simon Glass
• [U-Boot] [PATCH 2/8] ARM: hikey: Add ATF makefile referenced by README   Simon Glass
• [U-Boot] [PATCH v2 3/8] ARM: hikey: Use linux/sizes.h for malloc size   Simon Glass
• [U-Boot] [PATCH v2 4/8] ARM: hi6220: Add UART0 and UART3 base addresses   Simon Glass
• [U-Boot] [PATCH v2 5/8] ARM: hikey: Remove resetting gd->flags in board_init()   Simon Glass
• [U-Boot] [PATCH v2 6/8] ARM: hikey: Select DM, DM_GPIO from Kconfig   Simon Glass
• [U-Boot] [PATCH v2 7/8] ARM: hikey: hi6220: Migrate over to DM_SERIAL and use UART3 by default.   Simon Glass
• [U-Boot] [PATCH v2 8/8] ARM: hikey: Adjust SDRAM_1_SIZE to 0x3EFFFFFF   Simon Glass
• [U-Boot] [PATCH] nios2: convert altera_uart to driver model   Simon Glass
• [U-Boot] [PATCH v5] nios2: convert altera_jtag_uart to driver model   Simon Glass
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Simon Glass
• [U-Boot] [PATCH] dm: keystone: serial: Add driver model support   Simon Glass
• [U-Boot] [PATCH v5] nios2: convert altera_jtag_uart to driver model   Simon Glass
• [U-Boot] Galileo instructions   Simon Glass
• [U-Boot] Please pull u-boot-rockchip.git   Simon Glass
• [U-Boot] [PATCH 1/8] ARM: hikey: Update README with various corrections   Simon Glass
• [U-Boot] [PATCH 1/7] spl: spl_relocate_stack_gd: Do not unnecessarily clear bss   Simon Glass
• [U-Boot] [PATCH 2/7] malloc_simple: Fix malloc_ptr calculation   Simon Glass
• [U-Boot] [PATCH 3/7] malloc_simple: Add Kconfig option for using only malloc_simple in the SPL   Simon Glass
• [U-Boot] [PATCH 4/7] malloc_simple: Add support for switching to DRAM heap   Simon Glass
• [U-Boot] [PATCH] dts: do not cut down pinctrl-0 and pinctrl-names for SPL full-pinctrl   Simon Glass
• [U-Boot] buildman toolchains   Simon Glass
• [U-Boot] [PATCH v3 5/5] common: Enable fdt_support in SPL build   Simon Glass
• [U-Boot] [PATCH] common: add CMD_GPIO to Kconfig   Simon Glass
• [U-Boot] [PATCH v3 0/4] Move tpm_tis_i2c to tpm_tis_infineon and convert last tpm driver to use DM_TPM   Simon Glass
• [U-Boot] [PATCH 01/10] x86: chromebook_link: Expand early malloc() memory   Simon Glass
• [U-Boot] [PATCH] fdt: fix fdtdec_get_addr_size not to require any size cells   Simon Glass
• [U-Boot] Please pull u-boot-x86   Simon Glass
• [U-Boot] [PATCH V2 1/3] fdtdec: fix parsing 'reg' property with zero value in '#size-cells'   Simon Glass
• [U-Boot] [PATCH 2/3] fix: s5p_gpio: call: dev_get_addr() instead of fdtdec_get_addr()   Simon Glass
• [U-Boot] [PATCH V2 3/3] mach-exynos: clock: restore calling dead exynos4_get_mmc_clk()   Simon Glass
• [U-Boot] Please pull u-boot-x86   Simon Glass
• [U-Boot] [PATCH v2 02/13] x86: fsp: Report correct number of E820 table entries   Simon Glass
• [U-Boot] [PATCH] serial: rockchip: make ROCKCHIP_SERIAL depend on ARCH_ROCKCHIP   Simon Glass
• [U-Boot] [PATCH 1/6] dm: Rename dev_get_parentdata() to dev_get_parent_priv()   Simon Glass
• [U-Boot] [PATCH 2/6] dm: core: Adjust device.h header file order   Simon Glass
• [U-Boot] [PATCH 3/6] dm: core: Fix device flag whitespace   Simon Glass
• [U-Boot] [PATCH 4/6] dm: core: Tidy up devres comments   Simon Glass
• [U-Boot] [PATCH 5/6] dm: core: Remove a comment about dropping per_child_auto_alloc_size   Simon Glass
• [U-Boot] [PATCH 6/6] dm: core: Tidy up comments in device.h   Simon Glass
• [U-Boot] [PATCH v2 1/2] dm: implement a Timer uclass   Simon Glass
• [U-Boot] [PATCH v3] nios2: convert nios2 cpu to driver model   Simon Glass
• [U-Boot] [PATCH v2] nios2: convert nios2 cpu to driver model   Simon Glass
• [U-Boot] Please pull u-boot-x86.git (take 2)   Simon Glass
• [U-Boot] [PATCH v3] nios2 : convert altera_pio to driver model   Simon Glass
• [U-Boot] [PATCH V3 0/4] Fix fdt 'reg' parsing and unbreak few Exynos4 boards   Simon Glass
• [U-Boot] [PATCH 1/2] mx6: remove SYS_SOC from board Kconfig   Christian Gmeiner
• [U-Boot] [PATCH] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin   Hans de Goede
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Hans de Goede
• [U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add defconfig and dts for the pov protab2-ips9 tablet   Hans de Goede
• [U-Boot] [PATCH] RFC: dm: Add proposed timeline and guide for porting serial drivers   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add q8_a13_tablet defconfig and dts   Hans de Goede
• [U-Boot] [PATCH 1/2] sun4i: Add defconfig and dts for inet9f-rev03 based tablets   Hans de Goede
• [U-Boot] [PATCH 2/2] sun4i: Add dts and defconfig for iNet-1 based tablets   Hans de Goede
• [U-Boot] [PATCH] sunxi: Fix wrong serial console setup in Forfun Q88DB tablet   Hans de Goede
• [U-Boot] [PATCH] sunxi_nand_spl: Add config parameter for 4KiB page sized NAND devices   Hans de Goede
• [U-Boot] [PATCH] sunxi: Ensure that 'mksunxiboot' tool produces deterministic output   Hans de Goede
• [U-Boot] [PATCH] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant   Hans de Goede
• [U-Boot] [RFC PATCH 1/2] sunxi: retrieve FEL-provided values to environment variables   Hans de Goede
• [U-Boot] [RFC PATCH 2/2] sunxi: add "fel" boot target   Hans de Goede
• [U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller   Hans de Goede
• [U-Boot] [PATCH 4/5] dm: usb: Add support for USB keyboards with driver model   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH] sunxi: Rename A10s-Wobo-i5_defconfig to Wobo_i5_defconfig   Hans de Goede
• [U-Boot] [RFC PATCH 1/2] sunxi: retrieve FEL-provided values to environment variables   Hans de Goede
• [U-Boot] [RFC PATCH 2/2] sunxi: add "fel" boot target   Hans de Goede
• [U-Boot] [PATCH 0/5] RFC: usb: Drop requirement for USB unbinding   Hans de Goede
• [U-Boot] [PATCH 4/5] dm: usb: Add support for USB keyboards with driver model   Hans de Goede
• [U-Boot] [PATCH 0/5] RFC: usb: Drop requirement for USB unbinding   Hans de Goede
• [U-Boot] [PATCH] malloc_simple: fix malloc_ptr calculation   Hans de Goede
• [U-Boot] [PATCH] sunxi: Tweak various memory addresses   Hans de Goede
• [U-Boot] [PATCH 0/7] malloc_simple: Add support for switching to DRAM heap   Hans de Goede
• [U-Boot] [PATCH 1/7] spl: spl_relocate_stack_gd: Do not unnecessarily clear bss   Hans de Goede
• [U-Boot] [PATCH 2/7] malloc_simple: Fix malloc_ptr calculation   Hans de Goede
• [U-Boot] [PATCH 3/7] malloc_simple: Add Kconfig option for using only malloc_simple in the SPL   Hans de Goede
• [U-Boot] [PATCH 4/7] malloc_simple: Add support for switching to DRAM heap   Hans de Goede
• [U-Boot] [PATCH 5/7] sunxi: Simplify spl board_init_f function   Hans de Goede
• [U-Boot] [PATCH 6/7] sunxi: Enable CONFIG_SPL_STACK_R   Hans de Goede
• [U-Boot] [PATCH 7/7] sunxi: Switch to using malloc_simple for the spl   Hans de Goede
• [U-Boot] [PATCH 6/7] sunxi: Enable CONFIG_SPL_STACK_R   Hans de Goede
• [U-Boot] [PATCH] sunxi: Tweak various memory addresses   Hans de Goede
• [U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller   Hans de Goede
• [U-Boot] [PATCH 6/7] sunxi: Enable CONFIG_SPL_STACK_R   Hans de Goede
• [U-Boot] [RFC PATCH 2/2] sunxi: add "fel" boot target   Hans de Goede
• [U-Boot] [RFC PATCH 2/2] sunxi: add "fel" boot target   Hans de Goede
• [U-Boot] [PATCH v2 0/3] sunxi: support FEL-provided environment vars and "fel" boot target   Hans de Goede
• [U-Boot] [PATCH v2] malloc_simple: Add support for switching to DRAM heap   Hans de Goede
• [U-Boot] [PATCH v2 1/2] sunxi: Enable CONFIG_SPL_STACK_R   Hans de Goede
• [U-Boot] [PATCH v2 2/2] sunxi: Switch to using malloc_simple for the spl   Hans de Goede
• [U-Boot] [PATCH v2 2/4] ubifs: Add functions for generic fs use   Hans de Goede
• [U-Boot] [PATCH v2 3/4] ubifs: Add generic fs support   Hans de Goede
• [U-Boot] [PATCH v2 4/4] distro_bootcmd: Add support for booting from ubifs   Hans de Goede
• [U-Boot] [PATCH v3 3/4] sunxi: retrieve FEL-provided values to environment variables   Hans de Goede
• [U-Boot] [PATCH v3 0/4] sunxi: support FEL-provided environment vars and "fel" boot target   Hans de Goede
• [U-Boot] [PATCH v2 1/5] disk/part: Only build hostfs special handling when CONFIG_SANDBOX is set   Hans de Goede
• [U-Boot] [PATCH v2 2/5] ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use   Hans de Goede
• [U-Boot] [PATCH v2 3/5] ubifs: Add functions for generic fs use   Hans de Goede
• [U-Boot] [PATCH v2 4/5] ubifs: Add generic fs support   Hans de Goede
• [U-Boot] [PATCH v2 5/5] distro_bootcmd: Add support for booting from ubifs   Hans de Goede
• [U-Boot] [linux-sunxi] [PATCH 1/6] sunxi: Add an option to disable MMC   Hans de Goede
• [U-Boot] [linux-sunxi] [PATCH 2/6] fastboot: Implement OEM format only when we have MMC support   Hans de Goede
• [U-Boot] [linux-sunxi] [PATCH 6/6] sunxi: Add CHIP support   Hans de Goede
• [U-Boot] [PATCH 1/6] sunxi: Add an option to disable MMC   Hans de Goede
• [U-Boot] [linux-sunxi] Re: [PATCH 3/6] sunxi: Add the R8 DTSI   Hans de Goede
• [U-Boot] [linux-sunxi] Re: [PATCH 3/6] sunxi: Add the R8 DTSI   Hans de Goede
• [U-Boot] [PATCH v3 1/4] sunxi: move SPL-related definitions to platform-specific include   Hans de Goede
• [U-Boot] [PATCH 1/4] sunxi_nand_spl: Rename SPL_NAND_SUNXIto NAND_SUNXI   Hans de Goede
• [U-Boot] [PATCH v2] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin   Hans de Goede
• [U-Boot] [PATCH v2] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin   Hans de Goede
• [U-Boot] [PATCH v2] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin   Hans de Goede
• [U-Boot] [PATCH 3/7] malloc_simple: Add Kconfig option for using only malloc_simple in the SPL   Hans de Goede
• [U-Boot] [PATCH 4/7] malloc_simple: Add support for switching to DRAM heap   Hans de Goede
• [U-Boot] [PATCH v2 1/2] malloc_simple: Add Kconfig option for using only malloc_simple in the SPL   Hans de Goede
• [U-Boot] [PATCH v2 2/2] malloc_simple: Add support for switching to DRAM heap   Hans de Goede
• [U-Boot] Regression in usb-storage in u-boot 2015.04 ???   Hans de Goede
• [U-Boot] [PATCH] sunxi: mmc: Fix clk-delay settings   Hans de Goede
• [U-Boot] [PATCH] sunxi: mmc: Fix clk-delay settings   Hans de Goede
• [U-Boot] [PATCH] sunxi: mmc: Fix clk-delay settings   Hans de Goede
• [U-Boot] [PATCH v2] sunxi: mmc: Fix clk-delay settings   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add generic defconfigs for A33 Q8 tablets with 1024x600 / 800x480 LCD   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add generic defconfigs for A33 Q8 tablets with 1024x600 / 800x480 LCD   Hans de Goede
• [U-Boot] [PATCH] sunxi: Add generic defconfigs for A33 Q8 tablets with 1024x600 / 800x480 LCD   Hans de Goede
• [U-Boot] [PATCH 03/11] Kconfig: add CONFIG_SYS_BOOTM_LEN   Hans de Goede
• [U-Boot] [PATCH 03/11] Kconfig: add CONFIG_SYS_BOOTM_LEN   Hans de Goede
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
• [U-Boot] [PATCH 1/2] sunxi: Add generic defconfigs for A23 Q8 tablets with 800x480 LCD   Hans de Goede
• [U-Boot] [PATCH 2/2] sunxi: Remove board defconfig-s for specific Q8 tablet PCB-s   Hans de Goede
• [U-Boot] [PATCH 19/19] powerpc: mpc86xx: remove sbc8641d support   Paul Gortmaker
• [U-Boot] [PATCH 5/5] sbc8641d: enable and test CONFIG_SYS_GENERIC_BOARD   Paul Gortmaker
• [U-Boot] [PATCH v4 8/9] ARM64: hikey: Add a README for this board.   Peter Griffin
• [U-Boot] [PATCH 0/8] hikey: hi6220: Various fixups   Peter Griffin
• [U-Boot] [PATCH 1/8] ARM: hikey: Update README with various corrections   Peter Griffin
• [U-Boot] [PATCH 2/8] ARM: hikey: Add ATF makefile referenced by README   Peter Griffin
• [U-Boot] [PATCH 3/8] ARM: hikey: Use linux/sizes.h for malloc size   Peter Griffin
• [U-Boot] [PATCH 4/8] ARM: hi6220: Add UART0 and UART3 base addresses   Peter Griffin
• [U-Boot] [PATCH 5/8] ARM: hikey: Remove resetting gd->flags in board_init()   Peter Griffin
• [U-Boot] [PATCH 6/8] ARM: hikey: Select DM, DM_GPIO from Kconfig   Peter Griffin
• [U-Boot] [PATCH 7/8] ARM: hikey: hi6220: Migrate over to DM_SERIAL and UART3 for serial.   Peter Griffin
• [U-Boot] [PATCH 8/8] ARM: hikey: Adjust SDRAM_1_SIZE to 0x3EFFFFFF   Peter Griffin
• [U-Boot] [PATCH 3/8] ARM: hikey: Use linux/sizes.h for malloc size   Peter Griffin
• [U-Boot] [PATCH 7/8] ARM: hikey: hi6220: Migrate over to DM_SERIAL and UART3 for serial.   Peter Griffin
• [U-Boot] [PATCH v2 0/8] arm: hikey: hi6220: Various fixups   Peter Griffin
• [U-Boot] [PATCH v2 1/8] ARM: hikey: Update README with various corrections   Peter Griffin
• [U-Boot] [PATCH v2 2/8] ARM: hikey: Add ATF makefile referenced by README   Peter Griffin
• [U-Boot] [PATCH v2 3/8] ARM: hikey: Use linux/sizes.h for malloc size   Peter Griffin
• [U-Boot] [PATCH v2 4/8] ARM: hi6220: Add UART0 and UART3 base addresses   Peter Griffin
• [U-Boot] [PATCH v2 5/8] ARM: hikey: Remove resetting gd->flags in board_init()   Peter Griffin
• [U-Boot] [PATCH v2 6/8] ARM: hikey: Select DM, DM_GPIO from Kconfig   Peter Griffin
• [U-Boot] [PATCH v2 7/8] ARM: hikey: hi6220: Migrate over to DM_SERIAL and use UART3 by default.   Peter Griffin
• [U-Boot] [PATCH v2 8/8] ARM: hikey: Adjust SDRAM_1_SIZE to 0x3EFFFFFF   Peter Griffin
• [U-Boot] [PATCH 1/3] compulab: eeprom: select i2c bus when querying for board rev   Igor Grinberg
• [U-Boot] [PATCH 2/3] compulab: eeprom: add support for obtaining product name   Igor Grinberg
• [U-Boot] [PATCH 3/3] arm: mx6: cm-fx6: modify device tree for old revisions of utilite   Igor Grinberg
• [U-Boot] [PATCH V2 2/4] compulab: eeprom: propagate error value in read_mac_addr()   Igor Grinberg
• [U-Boot] [PATCH V2 3/4] compulab: eeprom: add support for obtaining product name   Igor Grinberg
• [U-Boot] [PATCH V2 4/4] arm: mx6: cm-fx6: modify device tree for old revisions of utilite   Igor Grinberg
• [U-Boot] [PATCH 1/3] omap3: cm-t3517: enable 'netretry' and setup timeout   Igor Grinberg
• [U-Boot] [PATCH 2/3] omap3: cm-t3517: fix MMC1 pinmux   Igor Grinberg
• [U-Boot] [PATCH 3/3] omap3: cm-t3517: change environment size   Igor Grinberg
• [U-Boot] [PATCH 1/2] mx6: remove SYS_SOC from board Kconfig   Igor Grinberg
• [U-Boot] [PATCH] omap3: cm-t3517: define CONFIG_MACH_TYPE   Igor Grinberg
• [U-Boot] [PATCH v2 3/3] omap3: cm-t3517: change environment size   Igor Grinberg
• [U-Boot] [PATCH V2 0/4] cm-fx6 updates for Utilite   Igor Grinberg
• [U-Boot] [PATCH 00/10] Kconfig and ti omap configs tidy up   Igor Grinberg
• [U-Boot] [PATCH 05/10] ti: omap3: config: remove 1 from boolean define   Igor Grinberg
• [U-Boot] [PATCH 04/10] Kconfig: add CONFIG_CMD_BOOTZ   Igor Grinberg
• [U-Boot] [PATCH 04/10] Kconfig: add CONFIG_CMD_BOOTZ   Igor Grinberg
• [U-Boot] [PATCH 05/10] ti: omap3: config: remove 1 from boolean define   Igor Grinberg
• [U-Boot] [PATCH 04/10] Kconfig: add CONFIG_CMD_BOOTZ   Igor Grinberg
• [U-Boot] [PATCH 05/10] ti: omap3: config: remove 1 from boolean define   Igor Grinberg
• [U-Boot] [PATCH] ARM: Kirkwood: enable generic board support for LaCie boards   Simon Guinot
• [U-Boot] [PATCH 03/45] arm: Remove most LaCie boards   Simon Guinot
• [U-Boot] v2015.10-rc2: timer not initialized on Kirkwood   Simon Guinot
• [U-Boot] [PATCH 03/45] arm: Remove most LaCie boards   Simon Guinot
• [U-Boot] [PATCH] ARM: Kirkwood: fix IDE configuration on LaCie boards   Simon Guinot
• [U-Boot] v2015.10-rc2: timer not initialized on Kirkwood   Simon Guinot
• [U-Boot] [PATCH v2] ARM: Kirkwood: fix IDE configuration on LaCie boards   Simon Guinot
• [U-Boot] [PATCH] ARM: Kirkwood: enable generic board support for LaCie boards   Simon Guinot
• [U-Boot] [PATCH v2] ARM: Kirkwood: fix IDE configuration on LaCie boards   Simon Guinot
• [U-Boot] [PATCH] arm: mvebu: timer.c: Explicitly move "init_done" var to data section   Simon Guinot
• [U-Boot] What's purpose of DEV_FLAGS_SYSTEM and DEV_EXT_VIDEO?   Anatolij Gustschin
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Anatolij Gustschin
• [U-Boot] [PATCH 00/11] vexpress64 FVP and Juno configuration updates   Ryan Harkin
• [U-Boot] [PATCH 01/11] vexpress64: fix checkpatch warnings   Ryan Harkin
• [U-Boot] [PATCH 02/11] vexpress64: Kconfig: tidy up   Ryan Harkin
• [U-Boot] [PATCH 03/11] Kconfig: add CONFIG_SYS_BOOTM_LEN   Ryan Harkin
• [U-Boot] [PATCH 04/11] vexpress64: Kconfig: add CONFIG_SYS_BOOTM_LEN   Ryan Harkin
• [U-Boot] [PATCH 05/11] vexpress64: fvp dram: add DRAM configuration   Ryan Harkin
• [U-Boot] [PATCH 06/11] vexpress64: juno: add androidboot.hardware=juno   Ryan Harkin
• [U-Boot] [PATCH 07/11] common/armflash: add command to check if image exists   Ryan Harkin
• [U-Boot] [PATCH 08/11] common/armflash: load_image returns success or failure   Ryan Harkin
• [U-Boot] [PATCH 09/11] vexpress64: juno: add optional initrd   Ryan Harkin
• [U-Boot] [PATCH 10/11] vexpress64: juno: add alternate kernel and device tree filenames   Ryan Harkin
• [U-Boot] [PATCH 11/11] vexpress64: juno: use /dev/sda2   Ryan Harkin
• [U-Boot] [PATCH 00/11] vexpress64 FVP and Juno configuration updates   Ryan Harkin
• [U-Boot] [PATCH 05/11] vexpress64: fvp dram: add DRAM configuration   Ryan Harkin
• [U-Boot] [PATCH 03/11] Kconfig: add CONFIG_SYS_BOOTM_LEN   Ryan Harkin
• [U-Boot] [PATCH v2 00/10] vexpress64 FVP and Juno configuration updates   Ryan Harkin
• [U-Boot] [PATCH v2 01/10] vexpress64: fix checkpatch warnings   Ryan Harkin
• [U-Boot] [PATCH v2 02/10] vexpress64: Kconfig: tidy up   Ryan Harkin
• [U-Boot] [PATCH v2 03/10] vexpress64: increase max gunzip size   Ryan Harkin
• [U-Boot] [PATCH v2 04/10] vexpress64: fvp dram: add DRAM configuration   Ryan Harkin
• [U-Boot] [PATCH v2 05/10] vexpress64: juno: add androidboot.hardware=juno   Ryan Harkin
• [U-Boot] [PATCH v2 06/10] common/armflash: add command to check if image exists   Ryan Harkin
• [U-Boot] [PATCH v2 07/10] common/armflash: load_image returns success or failure   Ryan Harkin
• [U-Boot] [PATCH v2 08/10] vexpress64: juno: add optional initrd   Ryan Harkin
• [U-Boot] [PATCH v2 09/10] vexpress64: juno: add alternate kernel and device tree filenames   Ryan Harkin
• [U-Boot] [PATCH v2 10/10] vexpress64: juno: use /dev/sda2   Ryan Harkin
• [U-Boot] [PATCH] mxs: mxsboot: fix endianess for sd boot images   Michael Heimpold
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Rob Herring
• [U-Boot] [PATCH 11/13] sunxi: Add support for android boot image   Rob Herring
• [U-Boot] [PATCH] checkpatch.pl: Fix checkpatch.pl warnings with Perl 5.22   Joe Hershberger
• [U-Boot] [PATCH] smsc95xx: Fetch whole burst with 1 URB, avoid framing errors   Joe Hershberger
• [U-Boot] [PATCH] doc: Fix inconsistent filename in PXE config example   Joe Hershberger
• [U-Boot] [PATCH 1/2] net: reject Bootp/DHCP packets with bad OP value   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: send RFC1542 compliant value for bootp requests   Joe Hershberger
• [U-Boot] [PATCH] net: Fix parsing of Bootp/DHCP option 0 (Pad)   Joe Hershberger
• [U-Boot] [PATCH 1/2] net: Do not overwrite options found in overloaded 'file' field   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: parse DHCP options from overloaded file/sname fields   Joe Hershberger
• [U-Boot] [PATCH] net/arp: Do not run net_start_again() on timeout   Joe Hershberger
• [U-Boot] [PATCH] net/arp: account for ARP delay, avoid duplicate packets on timeout   Joe Hershberger
• [U-Boot] [PATCH] net/eth: fix a bug in on_ethaddr()   Joe Hershberger
• [U-Boot] [PATCH v2 09/11] net: designware: Add support to PCI designware devices   Joe Hershberger
• [U-Boot] [PATCH] net: phy: on phy device create do not initialize link to 1   Joe Hershberger
• [U-Boot] [PATCH] net: change the env name to use const   Joe Hershberger
• [U-Boot] [PATCH v2 10/11] x86: Convert to use driver model eth on quark/galileo   Joe Hershberger
• [U-Boot] [PATCH 2/6] am335x_evm: prepare for eth driver model support   Joe Hershberger
• [U-Boot] [PATCH] smsc95xx: Use zero length packets when RX fifo is empty   Joe Hershberger
• [U-Boot] [PATCH v2 09/11] net: designware: Add support to PCI designware devices   Joe Hershberger
• [U-Boot] [PATCH] net: eth: Do sanity test on eth dev before eth_get_ops(dev)->start   Joe Hershberger
• [U-Boot] [PATCH] net: eth: Do sanity test on eth dev before eth_get_ops(dev)->start   Joe Hershberger
• [U-Boot] [PATCH] net: eth: Do sanity test on eth dev before eth_get_ops(dev)->start   Joe Hershberger
• [U-Boot] dm eth rotation is broken under some circumstances   Joe Hershberger
• [U-Boot] [PATCH 1/5] net: mdio: Add mdio_free() and mdio_unregister() API   Joe Hershberger
• [U-Boot] [PATCH v2 1/3] net: eth: Clear MAC address in eth_pre_remove()   Joe Hershberger
• [U-Boot] [PATCH v2 3/3] net: eth: Check return value in various places   Joe Hershberger
• [U-Boot] [PATCH v2 2/3] dm: test: Add a new test case against dm eth codes for NULL pointer access   Joe Hershberger
• [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Joe Hershberger
• [U-Boot] [PATCH] net: eth: Do sanity test on eth dev before eth_get_ops(dev)->start   Joe Hershberger
• [U-Boot] [PATCH 1/1] net: phy: micrel: add support for KSZ8021RNL & KSZ8031RNL   Joe Hershberger
• [U-Boot] [PATCH v2 1/3] net: eth: Clear MAC address in eth_pre_remove()   Joe Hershberger
• [U-Boot] [PATCH 1/5] net: mdio: Add mdio_free() and mdio_unregister() API   Joe Hershberger
• [U-Boot] [PATCH 1/3] net: phy: Don't create phy device when there is no phy   Joe Hershberger
• [U-Boot] [PATCH v4 11/16] common/env_flags.c: Add function to validate a MAC address   Joe Hershberger
• [U-Boot] [PATCH v4 12/16] drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953   Joe Hershberger
• [U-Boot] [RESEND PATCH v3 1/5] net: expose eth_is_active() function to test network device state   Joe Hershberger
• [U-Boot] [PATCH] smsc95xx: Use zero length packets when RX fifo is empty   Joe Hershberger
• [U-Boot] [PATCH 1/3] net: phy: Don't create phy device when there is no phy   Joe Hershberger
• [U-Boot] [PATCH 2/3] net: phy: Change to print all phys that are not found   Joe Hershberger
• [U-Boot] [PATCH 3/3] net: phy: Test previous phydev->dev against new mac dev   Joe Hershberger
• [U-Boot] [PATCH 1/6] dm: Rename dev_get_parentdata() to dev_get_parent_priv()   Joe Hershberger
• [U-Boot] [PATCH] net: bootp fix vci string on SPL-Boot   Joe Hershberger
• [U-Boot] [RESEND PATCH v3 1/5] net: expose eth_is_active() function to test network device state   Joe Hershberger
• [U-Boot] [RESEND PATCH v3 2/5] net: fix netconsole when CONFIG_DM_ETH is set   Joe Hershberger
• [U-Boot] [RESEND PATCH v3 3/5] net: avoid eth_unregister() call when function is unavailable   Joe Hershberger
• [U-Boot] [RESEND PATCH v3 4/5] net: support NETCONSOLE option via Kconfig   Joe Hershberger
• [U-Boot] [RESEND PATCH v3 5/5] sunxi: add NetConsole by default for Banana Pi/Pro   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [PATCH] net: phy: on phy device create do not initialize link to 1   Joe Hershberger
• [U-Boot] [PATCH v2] include: configs: Enable DWC3 and DFU in OMAP5 uEVM   Kishon Vijay Abraham I
• [U-Boot] Pull request: u-boot-sh/rmobile   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 0/4] Fix operation on Odroid devices   Tobias Jakobi
• [U-Boot] [PATCH 1/4] exynos: Properly initialize host_caps in s5p_sdhci_core_init()   Tobias Jakobi
• [U-Boot] [PATCH 2/4] exynos: Fix passing of errors in exynos_mmc_init()   Tobias Jakobi
• [U-Boot] [PATCH 3/4] exynos: be more verbose in process_nodes()   Tobias Jakobi
• [U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init()   Tobias Jakobi
• [U-Boot] [PATCH 0/4] Fix operation on Odroid devices   Tobias Jakobi
• [U-Boot] [PATCH 0/4] Fix operation on Odroid devices   Tobias Jakobi
• [U-Boot] [PATCH 0/4] Fix operation on Odroid devices   Tobias Jakobi
• [U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init()   Tobias Jakobi
• [U-Boot] [PATCH v2 1/4] exynos: Properly initialize host_caps in s5p_sdhci_core_init()   Tobias Jakobi
• [U-Boot] [PATCH v2 2/4] exynos: Fix passing of errors in exynos_mmc_init()   Tobias Jakobi
• [U-Boot] [PATCH v2 3/4] exynos: be more verbose in process_nodes()   Tobias Jakobi
• [U-Boot] [PATCH v2 4/4] exynos: more debug and cleanup in do_sdhci_init()   Tobias Jakobi
• [U-Boot] [PATCH 4/7] dm: pmic: add s2mps11 PMIC I/O driver   Minkyu Kang
• [U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init()   Minkyu Kang
• [U-Boot] [PATCH 2/4] exynos: Fix passing of errors in exynos_mmc_init()   Minkyu Kang
• [U-Boot] [PATCH V2 1/3] fdtdec: fix parsing 'reg' property with zero value in '#size-cells'   Minkyu Kang
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Ivan Khoronzhuk
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Ivan Khoronzhuk
• [U-Boot] [PATCH 0/3] cm-fx6 updates for Utilite   Nikita Kiryanov
• [U-Boot] [PATCH 1/3] compulab: eeprom: select i2c bus when querying for board rev   Nikita Kiryanov
• [U-Boot] [PATCH 2/3] compulab: eeprom: add support for obtaining product name   Nikita Kiryanov
• [U-Boot] [PATCH 3/3] arm: mx6: cm-fx6: modify device tree for old revisions of utilite   Nikita Kiryanov
• [U-Boot] [PATCH V2 0/4] cm-fx6 updates for Utilite   Nikita Kiryanov
• [U-Boot] [PATCH V2 1/4] compulab: eeprom: select i2c bus when querying for board rev   Nikita Kiryanov
• [U-Boot] [PATCH V2 2/4] compulab: eeprom: propagate error value in read_mac_addr()   Nikita Kiryanov
• [U-Boot] [PATCH V2 3/4] compulab: eeprom: add support for obtaining product name   Nikita Kiryanov
• [U-Boot] [PATCH V2 4/4] arm: mx6: cm-fx6: modify device tree for old revisions of utilite   Nikita Kiryanov
• [U-Boot] [PATCH V2 0/4] cm-fx6 updates for Utilite   Nikita Kiryanov
• [U-Boot] [PATCH 0/5] Add support for additional splash screen locations   Nikita Kiryanov
• [U-Boot] [PATCH 1/2] mx6: remove SYS_SOC from board Kconfig   Troy Kisky
• [U-Boot] [PATCH 1/2] nitrogen6x: Fix the error handling in board_eth_init()   Troy Kisky
• [U-Boot] [PATCH] imximage: fix commands other than write_data   Troy Kisky
• [U-Boot] [PATCH] imximage: fix commands other than write_data   Troy Kisky
• [U-Boot] [PATCH 1/1] imximage: header.length of 4 is valid   Troy Kisky
• [U-Boot] [PATCH 11/13] sunxi: Add support for android boot image   Paul Kocialkowski
• [U-Boot] [PATCH] common/image.c: Make boot_get_ramdisk() perform a check for Android images   Paul Kocialkowski
• [U-Boot] [PATCH 11/13] sunxi: Add support for android boot image   Paul Kocialkowski
• [U-Boot] [PATCH v3] Makefile: fix SOURCE_DATE_EPOCH for *BSD host   Paul Kocialkowski
• [U-Boot] [PATCH 1/7] omap-common: Common omap_die_id definition   Paul Kocialkowski
• [U-Boot] Fastboot is not detected   Paul Kocialkowski
• [U-Boot] [PATCH 1/7] omap-common: Common omap_die_id definition   Paul Kocialkowski
• [U-Boot] [PATCH 1/7] omap-common: Common omap_die_id definition   Paul Kocialkowski
• [U-Boot] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH   Paul Kocialkowski
• [U-Boot] [PATCH] arm: move edb93xx to generic board architecture   Sergey Kostanbev
• [U-Boot] [PATCH 1/1] spi: tegra20: Add support for mode selection   Mirza Krak
• [U-Boot] [PATCH 1/1] spi: tegra20: Add support for mode selection   Mirza Krak
• [U-Boot] [PATCH v2] spi: tegra20: Add support for mode selection   Mirza Krak
• [U-Boot] [PATCH v3] spi: tegra20: Add support for mode selection   Mirza Krak
• [U-Boot] U-Boot 2015.10-rc3: ARM: Fails to build for LS1021A-TWR with GCC 5.2   Krishnakar, Srikanth
• [U-Boot] [PATCH 1/4] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Viresh Kumar
• [U-Boot] [PATCH 2/4] arm: spear: Add command to switch between 1-bit HW ECC and SW BCH4   Viresh Kumar
• [U-Boot] DWMMC crontroller in Exynos4412   Humberto López León
• [U-Boot] [PATCH 0/3] omap3: cm-t3517: series of non critical fixes   Dmitry Lifshitz
• [U-Boot] [PATCH 1/3] omap3: cm-t3517: enable 'netretry' and setup timeout   Dmitry Lifshitz
• [U-Boot] [PATCH 2/3] omap3: cm-t3517: fix MMC1 pinmux   Dmitry Lifshitz
• [U-Boot] [PATCH 3/3] omap3: cm-t3517: change environment size   Dmitry Lifshitz
• [U-Boot] [PATCH v2 3/3] omap3: cm-t3517: change environment size   Dmitry Lifshitz
• [U-Boot] [PATCH] omap3: cm-t3517: define CONFIG_MACH_TYPE   Dmitry Lifshitz
• [U-Boot] regard to writeable ubi   ChengFang Lu
• [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: enable dat[4:7] for eMMC4.5   Yangbo Lu
• [U-Boot] [PATCH 2/3] powerpc/t1040qds: enable adapter card type identification support   Yangbo Lu
• [U-Boot] [PATCH 3/3] powerpc/t1040qds: enable peripheral clock for eSDHC   Yangbo Lu
• [U-Boot] [v2, 1/4] mmc: fsl_esdhc: enable dat[4:7] for eMMC4.5 Adapter Card   Yangbo Lu
• [U-Boot] [v2, 2/4] powerpc/t1040qds: enable adapter card type identification support   Yangbo Lu
• [U-Boot] [v2, 3/4] powerpc/t1040qds: enable peripheral clock for eSDHC   Yangbo Lu
• [U-Boot] [v2, 4/4] mmc: fsl_esdhc: enable EVDD automatic control for SD/MMC Legacy Adapter Card   Yangbo Lu
• [U-Boot] arm: socfpga: Question about FPGA/HPS SDRAM Bridge   Jian Luo
• [U-Boot] arm: socfpga: Question about FPGA/HPS SDRAM Bridge   Jian Luo
• [U-Boot] arm: socfpga: Question about FPGA/HPS SDRAM Bridge   Jian Luo
• [U-Boot] arm: socfpga: Question about FPGA/HPS SDRAM Bridge   Jian Luo
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Jian Luo
• [U-Boot] [PATCH] arm: socfpga: Fix memory error caused by re-enabling OCRAM ECC   Jian Luo
• [U-Boot] [PATCH v2] arm: socfpga: Fix memory error caused by re-enabling OCRAM ECC   Jian Luo
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Jian Luo
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Jian Luo
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Jian Luo
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Jian Luo
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Jian Luo
• [U-Boot] [PATCH 0/8] Better support of booting VxWorks via 'bootvx'   Jian Luo
• [U-Boot] [PATCH 2/2][V2] pci/layerscape: Add EP mode support   Lian M.H.
• [U-Boot] [PATCH v6 0/5] spi: cadence_qspi: optimize & fix indirect rd-writes   Vikas MANOCHA
• [U-Boot] [PATCH v6 4/5] spi: cadence_qspi: rename ahbbase to flashbase for clarity   Vikas MANOCHA
• [U-Boot] [PATCH v6 5/5] spi: cadence_qspi: get fifo width from device tree   Vikas MANOCHA
• [U-Boot] [PATCH v7 1/6] spi: cadence_qspi: move trigger base configuration in init   Vikas MANOCHA
• [U-Boot] [PATCH v7 1/6] spi: cadence_qspi: move trigger base configuration in init   Vikas MANOCHA
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Pavel Machek
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Pavel Machek
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Pavel Machek
• [U-Boot] [PATCH v3 1/5] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Pavel Machek
• [U-Boot] [PATCH v3 2/5] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Pavel Machek
• [U-Boot] [PATCH v3 3/5] spi: cadence_qspi: Ensure check for max frequency in place   Pavel Machek
• [U-Boot] [PATCH] ARM: socfpga: Enable saveenv for SD/MMC   Pavel Machek
• [U-Boot] [PATCH] arm: socfpga: Fix cache configuration   Pavel Machek
• [U-Boot] [PATCH] arm: socfpga: Fix cache configuration   Pavel Machek
• [U-Boot] [PATCHv3] arm: socfpga: Enable saveenv for SD/MMC   Pavel Machek
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Lukasz Majewski
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Lukasz Majewski
• [U-Boot] [PATCH] FIX: fat: Provide correct return code from disk_{read|write} to upper layers   Lukasz Majewski
• [U-Boot] [PATCH 2/2] mmc: dw_mmc: Make timeout error visible to u-boot console   Lukasz Majewski
• [U-Boot] [PATCH] FIX: fat: Provide correct return code from disk_{read|write} to upper layers   Lukasz Majewski
• [U-Boot] [PATCH] FIX: fat: Provide correct return code from disk_{read|write} to upper layers   Lukasz Majewski
• [U-Boot] [PATCH 01/10] usb: gadget: don't leak configs when unbinding   Lukasz Majewski
• [U-Boot] [PATCH 05/10] dfu: don't keep freeing/reallocating   Lukasz Majewski
• [U-Boot] [PATCH 06/10] dfu: mmc: buffer file reads too   Lukasz Majewski
• [U-Boot] [PATCH 04/10] ext4: fix leak in check_filename()   Lukasz Majewski
• [U-Boot] [PATCH 03/10] ext4: free allocations by parse_path()   Lukasz Majewski
• [U-Boot] [PATCH 02/10] ext4: avoid calling ext4fs_mount() twice, which leaks   Lukasz Majewski
• [U-Boot] [PATCH v5 3/3] at91, taurus, smartweb: add dfu support   Lukasz Majewski
• [U-Boot] [PATCH v5 3/3] at91, taurus, smartweb: add dfu support   Lukasz Majewski
• [U-Boot] [PATCH 07/10] ARM: tegra: fix malloc region sizing   Lukasz Majewski
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Lukasz Majewski
• [U-Boot] [PATCH] FIX: fat: Provide correct return code from disk_{read|write} to upper layers   Lukasz Majewski
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Lukasz Majewski
• [U-Boot] U-boot roadmap?   Lukasz Majewski
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Lukasz Majewski
• [U-Boot] [PATCH 1/2] FIX: env: import: hashtable: Prevent buffer overrun when importing environment from file   Lukasz Majewski
• [U-Boot] [PATCH 2/2] FIX: env: import: hashtable: Free memory allocated before exiting from himport_r()   Lukasz Majewski
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Lukasz Majewski
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Lukasz Majewski
• [U-Boot] [PATCH] FIX: fat: Provide correct return code from disk_{read|write} to upper layers   Lukasz Majewski
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Lukasz Majewski
• [U-Boot] [PATCH 4/4] dfu: add SF backend   Lukasz Majewski
• [U-Boot] [PATCH] dfu: dfu_sf: Use the erase sector size for erase operations   Lukasz Majewski
• [U-Boot] [PATCH] dfu: dfu_sf: Take the start address into account   Lukasz Majewski
• [U-Boot] [PATCH] FIX: fat: Provide correct return code from disk_{read|write} to upper layers   Lukasz Majewski
• [U-Boot] [PATCH 1/4] exynos: Properly initialize host_caps in s5p_sdhci_core_init()   Lukasz Majewski
• [U-Boot] [PATCH 2/4] exynos: Fix passing of errors in exynos_mmc_init()   Lukasz Majewski
• [U-Boot] [PATCH 3/4] exynos: be more verbose in process_nodes()   Lukasz Majewski
• [U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init()   Lukasz Majewski
• [U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init()   Lukasz Majewski
• [U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init()   Lukasz Majewski
• [U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init()   Lukasz Majewski
• [U-Boot] [PATCH] mmc: dw_mmc: Increase timeout to 4 minutes (as in Linux kernel)   Lukasz Majewski
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Lukasz Majewski
• [U-Boot] [PATCH v6 0/5] spi: cadence_qspi: optimize & fix indirect rd-writes   Vikas Manocha
• [U-Boot] [PATCH v6 1/5] spi: cadence_qspi: move trigger base configuration in init   Vikas Manocha
• [U-Boot] [PATCH v6 2/5] spi: cadence_qspi: fix indirect read/write start address   Vikas Manocha
• [U-Boot] [PATCH v6 3/5] spi: cadence_qspi: fix base trigger address & transfer start address   Vikas Manocha
• [U-Boot] [PATCH v6 4/5] spi: cadence_qspi: rename ahbbase to flashbase for clarity   Vikas Manocha
• [U-Boot] [PATCH v6 5/5] spi: cadence_qspi: get fifo width from device tree   Vikas Manocha
• [U-Boot] [PATCH v7 0/6] spi: cadence_qspi: optimize & fix indirect rd-writes   Vikas Manocha
• [U-Boot] [PATCH v7 1/6] spi: cadence_qspi: move trigger base configuration in init   Vikas Manocha
• [U-Boot] [PATCH v7 2/6] spi: cadence_qspi: fix indirect read/write start address   Vikas Manocha
• [U-Boot] [PATCH v7 3/6] spi: cadence_qspi: fix base trigger address & transfer start address   Vikas Manocha
• [U-Boot] [PATCH v7 4/6] spi: cadence_qspi: rename ahbbase to flashbase for clarity   Vikas Manocha
• [U-Boot] [PATCH v7 5/6] spi: cadence_qspi: remove unused macro   Vikas Manocha
• [U-Boot] [PATCH v7 6/6] spi: cadence_qspi: get fifo width from device tree   Vikas Manocha
• [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4   Przemyslaw Marczak
• [U-Boot] [PATCH 1/7] s5p: cpu_info: use defined CPU name if available   Przemyslaw Marczak
• [U-Boot] [PATCH 4/7] dm: pmic: add s2mps11 PMIC I/O driver   Przemyslaw Marczak
• [U-Boot] [PATCH 6/7] Exynos: add internal ADC driver   Przemyslaw Marczak
• [U-Boot] [PATCH 7/7] exynos5-dt: add board detection for Odroid XU3/XU3L/XU4.   Przemyslaw Marczak
• [U-Boot] [PATCH 4/7] dm: pmic: add s2mps11 PMIC I/O driver   Przemyslaw Marczak
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Przemyslaw Marczak
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Przemyslaw Marczak
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Przemyslaw Marczak
• [U-Boot] [PATCH V2 00/11] Add board detection for Odroid XU3 / XU3Lite / XU4   Przemyslaw Marczak
• [U-Boot] [PATCH V2 01/11] samsung: board/misc: check returned pointer for get_board_type() calls   Przemyslaw Marczak
• [U-Boot] [PATCH V2 02/11] s5p: cpu_info: print "cpu-model" if exists in dts   Przemyslaw Marczak
• [U-Boot] [PATCH V2 03/11] Peach-Pi: dts: add cpu-model string   Przemyslaw Marczak
• [U-Boot] [PATCH V2 04/11] Exynos5422/5800: set cpu id to 0x5422   Przemyslaw Marczak
• [U-Boot] [PATCH V2 05/11] dm: pmic: add s2mps11 PMIC I/O driver   Przemyslaw Marczak
• [U-Boot] [PATCH V2 06/11] dm: adc: add simple ADC uclass implementation   Przemyslaw Marczak
• [U-Boot] [PATCH V2 07/11] dm: adc: add Exynos54xx compatible ADC driver   Przemyslaw Marczak
• [U-Boot] [PATCH V2 08/11] Odroid-XU3: enable s2mps11 PMIC support   Przemyslaw Marczak
• [U-Boot] [PATCH V2 09/11] Exynos54xx: dts: add ADC node   Przemyslaw Marczak
• [U-Boot] [PATCH V2 10/11] Odroid-XU3: dts: enable ADC, with request for pre-reloc bind   Przemyslaw Marczak
• [U-Boot] [PATCH V2 11/11] exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4.   Przemyslaw Marczak
• [U-Boot] [PATCH V2 04/11] Exynos5422/5800: set cpu id to 0x5422   Przemyslaw Marczak
• [U-Boot] [PATCH 0/4] Fix operation on Odroid devices   Przemyslaw Marczak
• [U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init()   Przemyslaw Marczak
• [U-Boot] [PATCH 0/3] Fix fdt 'reg' parsing and unbreak Odroid U3   Przemyslaw Marczak
• [U-Boot] [PATCH 1/3] fix: fdtdec: allow parse 'reg' property with zero value in '#size-cells'   Przemyslaw Marczak
• [U-Boot] [PATCH 2/3] fix: s5p_gpio: call: dev_get_addr() instead of fdtdec_get_addr()   Przemyslaw Marczak
• [U-Boot] [PATCH 3/3] fix: mach-exynos: clock: restore calling dead exynos4_get_mmc_clk()   Przemyslaw Marczak
• [U-Boot] [PATCH 1/3] fix: fdtdec: allow parse 'reg' property with zero value in '#size-cells'   Przemyslaw Marczak
• [U-Boot] [PATCH 2/3] fix: s5p_gpio: call: dev_get_addr() instead of fdtdec_get_addr()   Przemyslaw Marczak
• [U-Boot] [PATCH 0/3] Fix fdt 'reg' parsing and unbreak Odroid U3   Przemyslaw Marczak
• [U-Boot] [PATCH 0/3] Fix fdt 'reg' parsing and unbreak Odroid U3   Przemyslaw Marczak
• [U-Boot] [PATCH 0/3] Fix fdt 'reg' parsing and unbreak Odroid U3   Przemyslaw Marczak
• [U-Boot] [PATCH V2 00/11] Add board detection for Odroid XU3 / XU3Lite / XU4   Przemyslaw Marczak
• [U-Boot] [PATCH] fdt: fix fdtdec_get_addr_size not to require any size cells   Przemyslaw Marczak
• [U-Boot] [PATCH V2 0/3] Fix fdt 'reg' parsing and unbreak few Exynos4 boards   Przemyslaw Marczak
• [U-Boot] [PATCH V2 1/3] fdtdec: fix parsing 'reg' property with zero value in '#size-cells'   Przemyslaw Marczak
• [U-Boot] [PATCH V2 2/3] gpio: s5p: call: dev_get_addr() instead of fdtdec_get_addr()   Przemyslaw Marczak
• [U-Boot] [PATCH V2 3/3] mach-exynos: clock: restore calling dead exynos4_get_mmc_clk()   Przemyslaw Marczak
• [U-Boot] [PATCH] mmc: dw_mmc: Increase timeout to 4 minutes (as in Linux kernel)   Przemyslaw Marczak
• [U-Boot] [PATCH v2 1/4] exynos: Properly initialize host_caps in s5p_sdhci_core_init()   Przemyslaw Marczak
• [U-Boot] [PATCH v2 2/4] exynos: Fix passing of errors in exynos_mmc_init()   Przemyslaw Marczak
• [U-Boot] [PATCH v2 3/4] exynos: be more verbose in process_nodes()   Przemyslaw Marczak
• [U-Boot] [PATCH v2 4/4] exynos: more debug and cleanup in do_sdhci_init()   Przemyslaw Marczak
• [U-Boot] [PATCH V2 3/3] mach-exynos: clock: restore calling dead exynos4_get_mmc_clk()   Przemyslaw Marczak
• [U-Boot] [PATCH V2 3/3] mach-exynos: clock: restore calling dead exynos4_get_mmc_clk()   Przemyslaw Marczak
• [U-Boot] [PATCH V3 0/4] Fix fdt 'reg' parsing and unbreak few Exynos4 boards   Przemyslaw Marczak
• [U-Boot] [PATCH V3 1/4] fdtdec: fix parsing 'reg' property with zero value in '#size-cells'   Przemyslaw Marczak
• [U-Boot] [PATCH V3 2/4] gpio: s5p: call: dev_get_addr() instead of fdtdec_get_addr()   Przemyslaw Marczak
• [U-Boot] [PATCH V3 3/4] mach-exynos: clock: restore calling dead exynos4_get_mmc_clk()   Przemyslaw Marczak
• [U-Boot] [PATCH V3 4/4] trats: fdt: disable unused DW MMC   Przemyslaw Marczak
• [U-Boot] [PATCH V3 0/4] Fix fdt 'reg' parsing and unbreak few Exynos4 boards   Przemyslaw Marczak
• [U-Boot] [PATCH 6/8] net: designware: Add support to PCI designware devices   Bin Meng
• [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Bin Meng
• [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Bin Meng
• [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Bin Meng
• [U-Boot] [PATCH v3 1/4] dm: pci: Allow a PCI bus to be found without an alias   Bin Meng
• [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Bin Meng
• [U-Boot] dm gpio   Bin Meng
• [U-Boot] dm gpio   Bin Meng
• [U-Boot] [PATCH v2 00/11] x86: quark: Convert to driver model   Bin Meng
• [U-Boot] [PATCH v2 01/11] x86: quark: Optimize MRC execution time   Bin Meng
• [U-Boot] [PATCH v2 02/11] x86: quark: Avoid chicken and egg problem   Bin Meng
• [U-Boot] [PATCH v2 03/11] x86: Enable PCIe controller on quark/galileo   Bin Meng
• [U-Boot] [PATCH v2 04/11] x86: Convert to use driver model pci on quark/galileo   Bin Meng
• [U-Boot] [PATCH v2 05/11] x86: quark: Add USB PHY initialization support   Bin Meng
• [U-Boot] [PATCH v2 06/11] x86: galileo: Convert to use CONFIG_DM_USB   Bin Meng
• [U-Boot] [PATCH v2 07/11] net: designware: Fix build warnings   Bin Meng
• [U-Boot] [PATCH v2 08/11] dm: pci: Add an inline API to test if a device is on a PCI bus   Bin Meng
• [U-Boot] [PATCH v2 09/11] net: designware: Add support to PCI designware devices   Bin Meng
• [U-Boot] [PATCH v2 10/11] x86: Convert to use driver model eth on quark/galileo   Bin Meng
• [U-Boot] [PATCH v2 11/11] x86: quark: Add PCIe/USB static register programming after memory init   Bin Meng
• [U-Boot] [PATCH v3 05/13] sf: Make flash->flags use for generic usage   Bin Meng
• [U-Boot] What's purpose of DEV_FLAGS_SYSTEM and DEV_EXT_VIDEO?   Bin Meng
• [U-Boot] [PATCH v2 01/11] x86: quark: Optimize MRC execution time   Bin Meng
• [U-Boot] [PATCH v2 03/11] x86: Enable PCIe controller on quark/galileo   Bin Meng
• [U-Boot] [PATCH v2 05/11] x86: quark: Add USB PHY initialization support   Bin Meng
• [U-Boot] [PATCH v2 09/11] net: designware: Add support to PCI designware devices   Bin Meng
• [U-Boot] [PATCH v3 00/11] x86: quark: Convert to driver model   Bin Meng
• [U-Boot] [PATCH v3 01/11] x86: quark: Optimize MRC execution time   Bin Meng
• [U-Boot] [PATCH v3 02/11] x86: quark: Avoid chicken and egg problem   Bin Meng
• [U-Boot] [PATCH v3 03/11] x86: Enable PCIe controller on quark/galileo   Bin Meng
• [U-Boot] [PATCH v3 04/11] x86: Convert to use driver model pci on quark/galileo   Bin Meng
• [U-Boot] [PATCH v3 05/11] x86: quark: Add USB PHY initialization support   Bin Meng
• [U-Boot] [PATCH v3 06/11] x86: galileo: Convert to use CONFIG_DM_USB   Bin Meng
• [U-Boot] [PATCH v3 07/11] net: designware: Fix build warnings   Bin Meng
• [U-Boot] [PATCH v3 08/11] dm: pci: Add an inline API to test if a device is on a PCI bus   Bin Meng
• [U-Boot] [PATCH v3 09/11] net: designware: Add support to PCI designware devices   Bin Meng
• [U-Boot] [PATCH v3 10/11] x86: Convert to use driver model eth on quark/galileo   Bin Meng
• [U-Boot] [PATCH v3 11/11] x86: quark: Add PCIe/USB static register programming after memory init   Bin Meng
• [U-Boot] [PATCH v4 00/11] x86: quark: Convert to driver model   Bin Meng
• [U-Boot] [PATCH v4 01/11] x86: quark: Optimize MRC execution time   Bin Meng
• [U-Boot] [PATCH v4 02/11] x86: quark: Avoid chicken and egg problem   Bin Meng
• [U-Boot] [PATCH v4 03/11] x86: Enable PCIe controller on quark/galileo   Bin Meng
• [U-Boot] [PATCH v4 04/11] x86: Convert to use driver model pci on quark/galileo   Bin Meng
• [U-Boot] [PATCH v4 05/11] x86: quark: Add USB PHY initialization support   Bin Meng
• [U-Boot] [PATCH v4 06/11] x86: galileo: Convert to use CONFIG_DM_USB   Bin Meng
• [U-Boot] [PATCH v4 07/11] net: designware: Fix build warnings   Bin Meng
• [U-Boot] [PATCH v4 08/11] dm: pci: Add an inline API to test if a device is on a PCI bus   Bin Meng
• [U-Boot] [PATCH v4 09/11] net: designware: Add support to PCI designware devices   Bin Meng
• [U-Boot] [PATCH v4 10/11] x86: Convert to use driver model eth on quark/galileo   Bin Meng
• [U-Boot] [PATCH v4 11/11] x86: quark: Add PCIe/USB static register programming after memory init   Bin Meng
• [U-Boot] [PATCH v4 09/11] net: designware: Add support to PCI designware devices   Bin Meng
• [U-Boot] [PATCH 1/3] net: phy: Don't create phy device when there is no phy   Bin Meng
• [U-Boot] [PATCH 2/3] net: phy: Change to print all phys that are not found   Bin Meng
• [U-Boot] [PATCH 3/3] net: phy: Test previous phydev->dev against new mac dev   Bin Meng
• [U-Boot] [PATCH 1/5] net: mdio: Add mdio_free() and mdio_unregister() API   Bin Meng
• [U-Boot] [PATCH 2/5] net: designware: Add driver remove support   Bin Meng
• [U-Boot] [PATCH 3/5] net: pch_gbe: Add driver remove support   Bin Meng
• [U-Boot] [PATCH 4/5] dm: core: Remove the call to device_free()   Bin Meng
• [U-Boot] [PATCH 5/5] dm: core: Remove unnecessary codes in uclass_pre_remove_device()   Bin Meng
• [U-Boot] [PATCH v2 09/11] net: designware: Add support to PCI designware devices   Bin Meng
• [U-Boot] [PATCH] net: eth: Do sanity test on eth dev before eth_get_ops(dev)->start   Bin Meng
• [U-Boot] "tftp: adjust settings to be suitable for 100Mbit ethernet" breaks imx6   Bin Meng
• [U-Boot] What's purpose of DEV_FLAGS_SYSTEM and DEV_EXT_VIDEO?   Bin Meng
• [U-Boot] Any more patches for x86?   Bin Meng
• [U-Boot] [PATCH v3 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Bin Meng
• [U-Boot] [PATCH 0/8] x86: Support booting Linux kernel on Intel Galileo   Bin Meng
• [U-Boot] [PATCH 1/8] x86: galileo: Enable random mac address for Quark   Bin Meng
• [U-Boot] [PATCH 2/8] x86: quark: Add clrbits, setbits, clrsetbits macros for message port access   Bin Meng
• [U-Boot] [PATCH 3/8] x86: quark: Convert to use clrbits, setbits, clrsetbits macros   Bin Meng
• [U-Boot] [PATCH 4/8] x86: quark: Lock HMBOUND register before jumping to kernel   Bin Meng
• [U-Boot] [PATCH 5/8] x86: quark: Initialize thermal sensor properly   Bin Meng
• [U-Boot] [PATCH 6/8] x86: galileo: Add PCIe root port IRQ routing   Bin Meng
• [U-Boot] [PATCH 7/8] x86: doc: Document some porting hints about Intel Quark   Bin Meng
• [U-Boot] [PATCH 8/8] x86: doc: Add DMI to the TODO list   Bin Meng
• [U-Boot] [PATCH] net: eth: Do sanity test on eth dev before eth_get_ops(dev)->start   Bin Meng
• [U-Boot] [PATCH] net: eth: Do sanity test on eth dev before eth_get_ops(dev)->start   Bin Meng
• [U-Boot] [PATCH 1/3] net: phy: Don't create phy device when there is no phy   Bin Meng
• [U-Boot] [PATCH 1/5] net: mdio: Add mdio_free() and mdio_unregister() API   Bin Meng
• [U-Boot] [PATCH] net: eth: Do sanity test on eth dev before eth_get_ops(dev)->start   Bin Meng
• [U-Boot] [PATCH] net: eth: Do sanity test on eth dev before eth_get_ops(dev)->start   Bin Meng
• [U-Boot] PCI configuration Issue for QEMU ACPI Support   Bin Meng
• [U-Boot] [PATCH v2 0/8] x86: Support booting Linux kernel on Intel Galileo   Bin Meng
• [U-Boot] [PATCH v2 1/8] x86: galileo: Enable random mac address for Quark   Bin Meng
• [U-Boot] [PATCH v2 2/8] x86: quark: Add clrbits, setbits, clrsetbits macros for message port access   Bin Meng
• [U-Boot] [PATCH v2 3/8] x86: quark: Convert to use clrbits, setbits, clrsetbits macros   Bin Meng
• [U-Boot] [PATCH v2 4/8] x86: quark: Lock HMBOUND register before jumping to kernel   Bin Meng
• [U-Boot] [PATCH v2 5/8] x86: quark: Initialize thermal sensor properly   Bin Meng
• [U-Boot] [PATCH v2 6/8] x86: galileo: Add PCIe root port IRQ routing   Bin Meng
• [U-Boot] [PATCH v2 7/8] x86: doc: Document some porting hints about Intel Quark   Bin Meng
• [U-Boot] [PATCH v2 8/8] x86: doc: Add DMI to the TODO list   Bin Meng
• [U-Boot] [PATCH 1/5] net: mdio: Add mdio_free() and mdio_unregister() API   Bin Meng
• [U-Boot] [PATCH 4/5] dm: core: Remove the call to device_free()   Bin Meng
• [U-Boot] [PATCH v2 1/3] net: eth: Clear MAC address in eth_pre_remove()   Bin Meng
• [U-Boot] [PATCH v2 2/3] dm: test: Add a new test case against dm eth codes for NULL pointer access   Bin Meng
• [U-Boot] [PATCH v2 3/3] net: eth: Check return value in various places   Bin Meng
• [U-Boot] dm eth rotation is broken under some circumstances   Bin Meng
• [U-Boot] [PATCH 4/5] dm: core: Remove the call to device_free()   Bin Meng
• [U-Boot] [PATCH v2 1/3] net: eth: Clear MAC address in eth_pre_remove()   Bin Meng
• [U-Boot] [PATCH 1/5] net: mdio: Add mdio_free() and mdio_unregister() API   Bin Meng
• [U-Boot] [PATCH v4 08/11] dm: pci: Add an inline API to test if a device is on a PCI bus   Bin Meng
• [U-Boot] [PATCH v5 1/4] dm: pci: Add an inline API to test if a device is on a PCI bus   Bin Meng
• [U-Boot] [PATCH v5 2/4] net: designware: Add support to PCI designware devices   Bin Meng
• [U-Boot] [PATCH v5 3/4] x86: Convert to use driver model eth on quark/galileo   Bin Meng
• [U-Boot] [PATCH v5 4/4] x86: quark: Add PCIe/USB static register programming after memory init   Bin Meng
• [U-Boot] Galileo instructions   Bin Meng
• [U-Boot] [PATCH] x86: quark: Configure MTRR to enable cache   Bin Meng
• [U-Boot] [PATCH 01/10] x86: chromebook_link: Expand early malloc() memory   Bin Meng
• [U-Boot] [PATCH 02/10] malloc_simple: Add debug() information   Bin Meng
• [U-Boot] [PATCH 03/10] dm: pci: Tidy up auto-config error handling   Bin Meng
• [U-Boot] [PATCH 04/10] dm: pci: Correct a few debug() statements   Bin Meng
• [U-Boot] [PATCH 05/10] dm: pci: Adjust pci_find_and_bind_driver() to return -EPERM   Bin Meng
• [U-Boot] [PATCH 06/10] debug_uart: Adjust the declaration of debug_uart_init()   Bin Meng
• [U-Boot] [PATCH 07/10] debug_uart: Support board-specific UART initialisation   Bin Meng
• [U-Boot] [PATCH 08/10] debug_uart: Add an option to announce the debug UART   Bin Meng
• [U-Boot] [PATCH 09/10] x86: Init the debug UART if enabled   Bin Meng
• [U-Boot] [PATCH 10/10] x86: chromebook_link: Enable the debug UART   Bin Meng
• [U-Boot] Galileo instructions   Bin Meng
• [U-Boot] Galileo instructions   Bin Meng
• [U-Boot] Galileo instructions   Bin Meng
• [U-Boot] Galileo instructions   Bin Meng
• [U-Boot] Galileo instructions   Bin Meng
• [U-Boot] [PATCH 1/3] net: phy: Don't create phy device when there is no phy   Bin Meng
• [U-Boot] [PATCH 01/28] dm: input: Create a keyboard uclass   Bin Meng
• [U-Boot] [PATCH 02/28] input: Add a device pointer to the input config   Bin Meng
• [U-Boot] [PATCH 03/28] input: Return -ENOSPC when there is not space   Bin Meng
• [U-Boot] [PATCH 04/28] input: Add the keycode translation tables separately   Bin Meng
• [U-Boot] [PATCH 06/28] dm: stdio: Plumb in the new keyboard uclass   Bin Meng
• [U-Boot] [PATCH 09/28] video: Drop unused console functions   Bin Meng
• [U-Boot] [PATCH 10/28] i8042: Use functions to handle register access   Bin Meng
• [U-Boot] [PATCH 11/28] i8042: Handle a duplicate power-on-reset response   Bin Meng
• [U-Boot] [PATCH 12/28] i8042: Adjust kbd_reset() to collect all failures   Bin Meng
• [U-Boot] [PATCH 13/28] i8042: Adjust keyboard init to assume success   Bin Meng
• [U-Boot] [PATCH 15/28] input: Add a few more keyboard keycodes   Bin Meng
• [U-Boot] [PATCH 18/28] input: Support the German keymap   Bin Meng
• [U-Boot] [PATCH 22/28] input: i8042: Convert to use the input library   Bin Meng
• [U-Boot] [PATCH 23/28] input: Add a Kconfig option for the i8042 keyboard   Bin Meng
• [U-Boot] [PATCH 24/28] x86: Add an i8042 device for boards that have it   Bin Meng
• [U-Boot] [PATCH 25/28] Drop CONFIG_ISA_KEYBOARD   Bin Meng
• [U-Boot] [PATCH 26/28] input: Convert i8042 to driver model   Bin Meng
• [U-Boot] [PATCH 27/28] video: input: Clean up after i8042 conversion   Bin Meng
• [U-Boot] [PATCH v3 05/13] sf: Make flash->flags use for generic usage   Bin Meng
• [U-Boot] [PATCH] sf: Make flash->flags use for generic usage   Bin Meng
• [U-Boot] [PATCH v3 05/13] sf: Make flash->flags use for generic usage   Bin Meng
• [U-Boot] [PATCH v3 06/13] sf: Update status reg check in spi_flash_cmd_wait_ready   Bin Meng
• [U-Boot] [PATCH v3 07/13] sf: Add FSR support to spi_flash_cmd_wait_ready   Bin Meng
• [U-Boot] [PATCH v3 08/13] sf: Add flash_read_reg support   Bin Meng
• [U-Boot] [PATCH v3 13/13] sf: Rename read register functions   Bin Meng
• [U-Boot] [PATCH v5 2/4] net: designware: Add support to PCI designware devices   Bin Meng
• [U-Boot] [PATCH 1/1] Kconfig: net: give PHYLIB to designware driver   Bin Meng
• [U-Boot] [PATCH 1/1] Kconfig: net: give PHYLIB to designware driver   Bin Meng
• [U-Boot] Galileo instructions   Bin Meng
• [U-Boot] [PATCH 1/3] net: phy: Don't create phy device when there is no phy   Bin Meng
• [U-Boot] buildman toolchains   Bin Meng
• [U-Boot] [PATCH 1/3] net: phy: Don't create phy device when there is no phy   Bin Meng
• [U-Boot] buildman toolchains   Bin Meng
• [U-Boot] buildman toolchains   Bin Meng
• [U-Boot] [PATCH] x86: fsp: Report correct number of E820 table entries   Bin Meng
• [U-Boot] [PATCH 0/8] Better support of booting VxWorks via 'bootvx'   Bin Meng
• [U-Boot] [PATCH 1/8] x86: Initialize GDT entry 1 to be the 32-bit CS as well   Bin Meng
• [U-Boot] [PATCH 2/8] cmd: Convert CONFIG_CMD_ELF to Kconfig   Bin Meng
• [U-Boot] [PATCH 3/8] cmd: Clean up cmd_elf a little bit   Bin Meng
• [U-Boot] [PATCH 4/8] cmd: elf: Reorder load_elf_image_phdr() and load_elf_image_shdr()   Bin Meng
• [U-Boot] [PATCH 5/8] cmd: bootvx: Pass netmask and gatewayip to VxWorks bootline   Bin Meng
• [U-Boot] [PATCH 6/8] cmd: bootvx: Always get VxWorks bootline from env   Bin Meng
• [U-Boot] [PATCH 7/8] cmd: bootvx: Pass E820 information to an x86 VxWorks kernel   Bin Meng
• [U-Boot] [PATCH 8/8] doc: Complement document about booting VxWorks   Bin Meng
• [U-Boot] [PATCH 5/8] cmd: bootvx: Pass netmask and gatewayip to VxWorks bootline   Bin Meng
• [U-Boot] buildman toolchains   Bin Meng
• [U-Boot] buildman toolchains   Bin Meng
• [U-Boot] [PATCH] tools: moveconfig: Update the URL for nds32 toolchain   Bin Meng
• [U-Boot] [PATCH 2/8] cmd: Convert CONFIG_CMD_ELF to Kconfig   Bin Meng
• [U-Boot] [PATCH 2/8] cmd: Convert CONFIG_CMD_ELF to Kconfig   Bin Meng
• [U-Boot] [PATCH 2/8] cmd: Convert CONFIG_CMD_ELF to Kconfig   Bin Meng
• [U-Boot] [PATCH 2/8] cmd: Convert CONFIG_CMD_ELF to Kconfig   Bin Meng
• [U-Boot] [PATCH] board/BuR/kwb: implement board-specific do_go_exec to form vxWorks bootline   Bin Meng
• [U-Boot] [PATCH v2 00/13] Better support of booting VxWorks via 'bootvx'   Bin Meng
• [U-Boot] [PATCH v2 01/13] Reorder defconfigs with 'savedefconfig'   Bin Meng
• [U-Boot] [PATCH v2 02/13] x86: fsp: Report correct number of E820 table entries   Bin Meng
• [U-Boot] [PATCH v2 03/13] x86: Initialize GDT entry 1 to be the 32-bit CS as well   Bin Meng
• [U-Boot] [PATCH v2 04/13] x86: Move install_e820_map() out of zimage.c   Bin Meng
• [U-Boot] [PATCH v2 05/13] x86: Remove quotation mark in CONFIG_HOSTNAME   Bin Meng
• [U-Boot] [PATCH v2 06/13] cmd: Convert CONFIG_CMD_ELF to Kconfig   Bin Meng
• [U-Boot] [PATCH v2 07/13] cmd: Clean up cmd_elf a little bit   Bin Meng
• [U-Boot] [PATCH v2 08/13] cmd: elf: Reorder load_elf_image_phdr() and load_elf_image_shdr()   Bin Meng
• [U-Boot] [PATCH v2 09/13] cmd: bootvx: Pass netmask and gatewayip to VxWorks bootline   Bin Meng
• [U-Boot] [PATCH v2 10/13] cmd: bootvx: Always get VxWorks bootline from env   Bin Meng
• [U-Boot] [PATCH v2 11/13] cmd: bootvx: Pass E820 information to an x86 VxWorks kernel   Bin Meng
• [U-Boot] [PATCH v2 12/13] cmd: bootvx: Add asmlinkage to the VxWorks x86 entry   Bin Meng
• [U-Boot] [PATCH v2 13/13] doc: Complement document about booting VxWorks   Bin Meng
• [U-Boot] [PATCH 0/8] Better support of booting VxWorks via 'bootvx'   Bin Meng
• [U-Boot] [PATCH] board/BuR/kwb: implement board-specific do_go_exec to form vxWorks bootline   Bin Meng
• [U-Boot] [PATCH] board/BuR/kwb: implement board-specific do_go_exec to form vxWorks bootline   Bin Meng
• [U-Boot] [PATCH] board/BuR/kwb: implement board-specific do_go_exec to form vxWorks bootline   Bin Meng
• [U-Boot] [PATCH 2/8] cmd: Convert CONFIG_CMD_ELF to Kconfig   Bin Meng
• [U-Boot] [PATCH RESPIN v2 01/13] Reorder defconfigs with 'savedefconfig'   Bin Meng
• [U-Boot] [PATCH 2/8] cmd: Convert CONFIG_CMD_ELF to Kconfig   Bin Meng
• [U-Boot] [PATCH RESPIN v2 01/13] Reorder defconfigs with 'savedefconfig'   Bin Meng
• [U-Boot] PCI issues for bringing up ACPI support on QEMU and Minnowmax target   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH] board/BuR/kwb: implement board-specific do_go_exec to form vxWorks bootline   Bin Meng
• [U-Boot] [RFC PATCH] x86: Support booting SeaBIOS   Bin Meng
• [U-Boot] [PATCH v2] board/BuR/kwb: use bootvx(...) (with bootline feature) instead go(...)   Bin Meng
• [U-Boot] [PATCH v2] nios2: convert nios2 cpu to driver model   Bin Meng
• [U-Boot] [PATCH v2] nios2: convert nios2 cpu to driver model   Bin Meng
• [U-Boot] [PATCH V2 1/4] drivers: Introduce a simplified remoteproc framework   Nishanth Menon
• [U-Boot] [PATCH V2 2/4] remoteproc: Introduce a sandbox dummy driver   Nishanth Menon
• [U-Boot] [PATCH V2 4/4] test: Add basic tests for remoteproc   Nishanth Menon
• [U-Boot] [PATCH V3 0/4] drivers/sandbox: Introduce a simplified remoteproc framework   Nishanth Menon
• [U-Boot] [PATCH V3 1/4] drivers: Introduce a simplified remoteproc framework   Nishanth Menon
• [U-Boot] [PATCH V3 2/4] remoteproc: Introduce a sandbox dummy driver   Nishanth Menon
• [U-Boot] [PATCH V3 3/4] sandbox: Introduce dummy remoteproc nodes   Nishanth Menon
• [U-Boot] [PATCH V3 4/4] test: Add basic tests for remoteproc   Nishanth Menon
• [U-Boot] Bug: RealTek chipset does not work at 100/1000 Mbps   Mike
• [U-Boot] [PATCH] Don't wrap to negative after 2G sectors   Stefan Monnier
• [U-Boot] [PATCH] Don't wrap to negative after 2G sectors   Stefan Monnier
• [U-Boot] [PATCH V2 00/11] Add board detection for Odroid XU3 / XU3Lite / XU4   Anand Moon
• [U-Boot] [PATCH 0/6] device model bringup of cpsw on am335x bone black   Mugunthan V N
• [U-Boot] [PATCH 1/6] drivers: of: add support for get device address based on index   Mugunthan V N
• [U-Boot] [PATCH 2/6] am335x_evm: prepare for eth driver model support   Mugunthan V N
• [U-Boot] [PATCH 3/6] am335x_evm: do not define usb ether gadget when Eth DM is defined   Mugunthan V N
• [U-Boot] [PATCH 4/6] drivers: net: cpsw: prepare driver for device model migration   Mugunthan V N
• [U-Boot] [PATCH 5/6] drivers: net: cpsw: convert driver to adopt device driver model   Mugunthan V N
• [U-Boot] [PATCH 6/6] defconfig: am335x: bbb: enable ethernet driver model   Mugunthan V N
• [U-Boot] [PATCH] defconfig: am335x: gp_evm: enable ethernet driver model   Mugunthan V N
• [U-Boot] [PATCH] net: phy: on phy device create do not initialize link to 1   Mugunthan V N
• [U-Boot] [PATCH 1/6] drivers: of: add support for get device address based on index   Mugunthan V N
• [U-Boot] [PATCH 5/6] drivers: net: cpsw: convert driver to adopt device driver model   Mugunthan V N
• [U-Boot] [PATCH] fdt: add new fdt address parsing functions   Mugunthan V N
• [U-Boot] [PATCH v2 0/6] device model bringup of cpsw on am335x bone black   Mugunthan V N
• [U-Boot] [PATCH v2 1/6] am335x_evm: prepare for eth driver model support   Mugunthan V N
• [U-Boot] [PATCH v2 2/6] am335x_evm: do not define usb ether gadget when Eth DM is defined   Mugunthan V N
• [U-Boot] [PATCH v2 3/6] drivers: net: cpsw: prepare driver for device model migration   Mugunthan V N
• [U-Boot] [PATCH v2 4/6] drivers: net: cpsw: convert driver to adopt device driver model   Mugunthan V N
• [U-Boot] [PATCH v2 5/6] defconfig: am335x: bbb: enable ethernet driver model   Mugunthan V N
• [U-Boot] [PATCH v2 6/6] defconfig: am335x: gp_evm: enable ethernet driver model   Mugunthan V N
• [U-Boot] [PATCH] fdt: add new fdt address parsing functions   Mugunthan V N
• [U-Boot] [PATCH] fdt: add new fdt address parsing functions   Mugunthan V N
• [U-Boot] [PATCH] net: phy: on phy device create do not initialize link to 1   Mugunthan V N
• [U-Boot] [PATCH 0/5] device model bringup of hsmmc on am335x bone black and gp evm   Mugunthan V N
• [U-Boot] [PATCH 1/5] omap_hsmmc: update struct hsmmc to accomodate base address from DT   Mugunthan V N
• [U-Boot] [PATCH 2/5] am335x_evm: mmc: do not define DM_MMC for spl   Mugunthan V N
• [U-Boot] [PATCH 3/5] drivers: mmc: omap_hsmmc: convert driver to adopt device driver model   Mugunthan V N
• [U-Boot] [PATCH 4/5] defconfig: am335x: bbb: enable ethernet driver model   Mugunthan V N
• [U-Boot] [PATCH 5/5] defconfig: am335x: gp_evm: enable ethernet driver model   Mugunthan V N
• [U-Boot] [PATCH 0/5] device model bringup of hsmmc on am335x bone black and gp evm   Mugunthan V N
• [U-Boot] [PATCH v2 0/6] device model bringup of cpsw on am335x bone black   Mugunthan V N
• [U-Boot] [PATCH] dra7xx: Add dra74_evm_defconfig using CONFIG_DM   Mugunthan V N
• [U-Boot] [PATCH 3/5] drivers: mmc: omap_hsmmc: convert driver to adopt device driver model   Mugunthan V N
• [U-Boot] [PATCH v2 0/5] device model bringup of hsmmc on am335x bone black and gp evm   Mugunthan V N
• [U-Boot] [PATCH v2 1/5] omap_hsmmc: update struct hsmmc to accomodate base address from DT   Mugunthan V N
• [U-Boot] [PATCH v2 2/5] am335x_evm: mmc: do not define DM_MMC for spl   Mugunthan V N
• [U-Boot] [PATCH v2 3/5] drivers: mmc: omap_hsmmc: convert driver to adopt device driver model   Mugunthan V N
• [U-Boot] [PATCH v2 4/5] defconfig: am335x: bbb: enable mmc driver model   Mugunthan V N
• [U-Boot] [PATCH v2 5/5] defconfig: am335x: gp_evm: enable mmc driver model   Mugunthan V N
• [U-Boot] [PATCH 0/6] device model bringup of am437x platform on gp-evm and sk-evm   Mugunthan V N
• [U-Boot] [PATCH 1/6] drivers: serial: serial_omap: populate default clock frequency when not found in dt   Mugunthan V N
• [U-Boot] [PATCH 2/6] drivers: serial: serial_omap: add comaptibles for all ti platforms   Mugunthan V N
• [U-Boot] [PATCH 3/6] am43xx_evm.h: : switch to CONFIG_OMAP_SERIAL for non-SPL DM_SERIAL   Mugunthan V N
• [U-Boot] [PATCH 4/6] am43xx_evm: mmc: do not define DM_MMC for spl   Mugunthan V N
• [U-Boot] [PATCH 5/6] am437x: Add am437x_gp_evm_defconfig using CONFIG_DM   Mugunthan V N
• [U-Boot] [PATCH 6/6] am437x: Add am437x_sk_evm_defconfig using CONFIG_DM   Mugunthan V N
• [U-Boot] [PATCH 3/6] am43xx_evm.h: : switch to CONFIG_OMAP_SERIAL for non-SPL DM_SERIAL   Mugunthan V N
• [U-Boot] [PATCH 0/2] device model bringup of am57xx platform on am57xx-evm   Mugunthan V N
• [U-Boot] [PATCH 1/2] ti_omap5_common: mmc: do not define DM_MMC for spl   Mugunthan V N
• [U-Boot] [PATCH 2/2] am437x: Add am57xx_evm_defconfig using CONFIG_DM   Mugunthan V N
• [U-Boot] ## Application terminated, rc = 0x1   Nable
• [U-Boot] mkimage: mxs (mx23_olinuxino) build regression   Robert Nelson
• [U-Boot] mkimage: mxs (mx23_olinuxino) build regression   Robert Nelson
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Dinh Nguyen
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Dinh Nguyen
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Dinh Nguyen
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Dinh Nguyen
• [U-Boot] [PATCHv2] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Dinh Nguyen
• [U-Boot] [PATCH] ARM: socfpga: Enable saveenv for SD/MMC   Dinh Nguyen
• [U-Boot] [PATCH 3/3] arm: socfpga: Enable saveenv for SD/MMC   Dinh Nguyen
• [U-Boot] [PATCH 1/2] mx6: remove SYS_SOC from board Kconfig   Markus Niebel
• [U-Boot] [PATCH] am437x_evm: increase phy autoneg timeout   Sekhar Nori
• [U-Boot] [PATCH 1/2] add generic stubs for GPIO LEDs   Bernhard Nortmann
• [U-Boot] [PATCH] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant   Bernhard Nortmann
• [U-Boot] [PATCH] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant   Bernhard Nortmann
• [U-Boot] [RFC PATCH 0/2] sunxi: support FEL-provided environment vars and "fel" boot target   Bernhard Nortmann
• [U-Boot] [RFC PATCH 1/2] sunxi: retrieve FEL-provided values to environment variables   Bernhard Nortmann
• [U-Boot] [RFC PATCH 2/2] sunxi: add "fel" boot target   Bernhard Nortmann
• [U-Boot] [PATCH] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant   Bernhard Nortmann
• [U-Boot] [RFC PATCH 1/2] sunxi: retrieve FEL-provided values to environment variables   Bernhard Nortmann
• [U-Boot] [RFC PATCH 2/2] sunxi: add "fel" boot target   Bernhard Nortmann
• [U-Boot] [RFC PATCH 1/2] sunxi: retrieve FEL-provided values to environment variables   Bernhard Nortmann
• [U-Boot] [PATCH v2 0/3] sunxi: support FEL-provided environment vars and "fel" boot target   Bernhard Nortmann
• [U-Boot] [PATCH v2 1/3] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant   Bernhard Nortmann
• [U-Boot] [PATCH v2 2/3] sunxi: retrieve FEL-provided values to environment variables   Bernhard Nortmann
• [U-Boot] [PATCH v2 3/3] sunxi: add "fel" boot target   Bernhard Nortmann
• [U-Boot] [RESEND PATCH v3 0/5] fix NetConsole for CONFIG_DM_ETH   Bernhard Nortmann
• [U-Boot] [RESEND PATCH v3 1/5] net: expose eth_is_active() function to test network device state   Bernhard Nortmann
• [U-Boot] [RESEND PATCH v3 2/5] net: fix netconsole when CONFIG_DM_ETH is set   Bernhard Nortmann
• [U-Boot] [RESEND PATCH v3 3/5] net: avoid eth_unregister() call when function is unavailable   Bernhard Nortmann
• [U-Boot] [RESEND PATCH v3 4/5] net: support NETCONSOLE option via Kconfig   Bernhard Nortmann
• [U-Boot] [RESEND PATCH v3 5/5] sunxi: add NetConsole by default for Banana Pi/Pro   Bernhard Nortmann
• [U-Boot] [PATCH v2 2/3] sunxi: retrieve FEL-provided values to environment variables   Bernhard Nortmann
• [U-Boot] [PATCH v3 0/4] sunxi: support FEL-provided environment vars and "fel" boot target   Bernhard Nortmann
• [U-Boot] [PATCH v3 1/4] sunxi: move SPL-related definitions to platform-specific include   Bernhard Nortmann
• [U-Boot] [PATCH v3 2/4] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant   Bernhard Nortmann
• [U-Boot] [PATCH v3 3/4] sunxi: retrieve FEL-provided values to environment variables   Bernhard Nortmann
• [U-Boot] [PATCH v3 4/4] sunxi: add "fel" boot target   Bernhard Nortmann
• [U-Boot] [PATCH v3 0/4] sunxi: support FEL-provided environment vars and "fel" boot target   Bernhard Nortmann
• [U-Boot] [PATCH v3 1/4] sunxi: move SPL-related definitions to platform-specific include   Bernhard Nortmann
• [U-Boot] [PATCH v2 1/2] usb: zynqmp: Add XHCI driver support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 2/2] usb: zynqmp: Enable USB XHCI support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 1/2] usb: zynqmp: Add XHCI driver support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 2/2] usb: zynqmp: Enable USB XHCI support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 1/2] usb: zynqmp: Add XHCI driver support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 1/2] usb: zynqmp: Add XHCI driver support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 1/2] usb: zynqmp: Add XHCI driver support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 2/2] usb: zynqmp: Enable USB XHCI support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v4 01/16] spi: Add zynq qspi controller driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v4 01/16] spi: Add zynq qspi controller driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 1/2] usb: zynqmp: Add XHCI driver support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 2/2] usb: zynqmp: Enable USB XHCI support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v3 1/2] usb: zynqmp: Add XHCI driver support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v4 1/2] usb: zynqmp: Add XHCI driver support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v4 2/2] usb: zynqmp: Enable USB XHCI support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v4 01/16] spi: Add zynq qspi controller driver   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v4 1/2] usb: zynqmp: Add XHCI driver support   Siva Durga Prasad Paladugu
• [U-Boot] Zynq build failure   Siva Durga Prasad Paladugu
• [U-Boot] Zynq build failure   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] zynq-common: Define spi args offset and size   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2] zynq-common: Define spi args offset and size   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 1/4] sf: params: Add IS25LP032 part support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] sf: probe: Add support to set Quad enable bit for ISSI   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH 1/4] sf: params: Add IS25LP032 part support   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2] zynq-common: Define spi args offset and size   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] checkpatch.pl: Fix checkpatch.pl warnings with Perl 5.22   Joe Perches
• [U-Boot] [Patch v2 09/16] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC   Kushwaha Prabhakar
• [U-Boot] TFTP Timeout Interval problem   Gong Q.Y.
• [U-Boot] [PATCH 09/14] armv8/ls1043ardb: Add nand boot support   Gong Q.Y.
• [U-Boot] [PATCH 09/14] armv8/ls1043ardb: Add nand boot support   Gong Q.Y.
• [U-Boot] [Patch v2 11/16] armv8/ls1043ardb: Add nand boot support   Gong Q.Y.
• [U-Boot] [PATCH 09/14] armv8/ls1043ardb: Add nand boot support   Gong Q.Y.
• [U-Boot] [Patch v2 02/16] common/board_f.c: modify the macro to use get_clocks() more common   Gong Q.Y.
• [U-Boot] [PATCH 1/3] qe: add u-qe support to arm board   Zhao Qiang
• [U-Boot] [PATCH 2/3] qe: add qe support to ls1021aqds   Zhao Qiang
• [U-Boot] [PATCH 3/3] qe: add qe support for ls1021a-twr board   Zhao Qiang
• [U-Boot] [PATCH] QE: modify the address of qe ucode   Zhao Qiang
• [U-Boot] [PATCH] common/board_f.c: modify the macro to use get_clocks() more common   Gong Qianyu
• [U-Boot] [PATCH] arm/asm: Data types defined for 64 bit Physical Address   Gong Qianyu
• [U-Boot] [PATCH] ARMv7/ls1021a: move ns_access to common file   Gong Qianyu
• [U-Boot] [PATCH 01/14] net/fm: Fix the endian issue of ucode uploading to IRAM   Gong Qianyu
• [U-Boot] [PATCH 02/14] net/fm: bug fix when CONFIG_PHYLIB not defined   Gong Qianyu
• [U-Boot] [PATCH 03/14] net: Move some header files to include/   Gong Qianyu
• [U-Boot] [PATCH 04/14] net/fm: Add QSGMII PCS init   Gong Qianyu
• [U-Boot] [PATCH 05/14] net/fm: fix MDIO controller base on FMAN2   Gong Qianyu
• [U-Boot] [PATCH 06/14] net/fm: fix compile warnings for 64-bit platform   Gong Qianyu
• [U-Boot] [PATCH 07/14] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC   Gong Qianyu
• [U-Boot] [PATCH 08/14] ARMv8/ls1043ardb: Add LS1043ARDB board support   Gong Qianyu
• [U-Boot] [PATCH 09/14] armv8/ls1043ardb: Add nand boot support   Gong Qianyu
• [U-Boot] [PATCH 10/14] armv8/ls1043ardb: Add cpld command to boot from nand   Gong Qianyu
• [U-Boot] [PATCH 11/14] armv8/ls1043a: Add Fman support   Gong Qianyu
• [U-Boot] [PATCH 12/14] armv8/ls1043ardb: esdhc: Add esdhc support for ls1043ardb   Gong Qianyu
• [U-Boot] [PATCH 13/14] armv8/ls1043ardb: Add sd boot support   Gong Qianyu
• [U-Boot] [PATCH 14/14] armv8/ls1043ardb: Add cpld command to boot from sd   Gong Qianyu
• [U-Boot] [Patch v2 01/16] ARMv7/ls1021a: move ns_access to common file   Gong Qianyu
• [U-Boot] [Patch v2 02/16] common/board_f.c: modify the macro to use get_clocks() more common   Gong Qianyu
• [U-Boot] [Patch v2 03/16] net/fm: Fix the endian issue of ucode uploading to IRAM   Gong Qianyu
• [U-Boot] [Patch v2 04/16] net/fm: bug fix when CONFIG_PHYLIB not defined   Gong Qianyu
• [U-Boot] [Patch v2 05/16] net: Move some header files to include/   Gong Qianyu
• [U-Boot] [Patch v2 06/16] net/fm: Add QSGMII PCS init   Gong Qianyu
• [U-Boot] [Patch v2 07/16] net/fm: fix MDIO controller base on FMAN2   Gong Qianyu
• [U-Boot] [Patch v2 08/16] net/fm: fix compile warnings for 64-bit platform   Gong Qianyu
• [U-Boot] [Patch v2 09/16] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC   Gong Qianyu
• [U-Boot] [Patch v2 10/16] ARMv8/ls1043ardb: Add LS1043ARDB board support   Gong Qianyu
• [U-Boot] [Patch v2 11/16] armv8/ls1043ardb: Add nand boot support   Gong Qianyu
• [U-Boot] [Patch v2 12/16] armv8/ls1043ardb: Add cpld command to boot from nand   Gong Qianyu
• [U-Boot] [Patch v2 13/16] armv8/ls1043a: Add Fman support   Gong Qianyu
• [U-Boot] [Patch v2 14/16] armv8/ls1043ardb: esdhc: Add esdhc support for ls1043ardb   Gong Qianyu
• [U-Boot] [Patch v2 15/16] armv8/ls1043ardb: Add sd boot support   Gong Qianyu
• [U-Boot] [Patch v2 16/16] armv8/ls1043ardb: Add cpld command to boot from sd   Gong Qianyu
• [U-Boot] [Patch V3 00/16] Add LS1043A platform support   Gong Qianyu
• [U-Boot] [Patch V3 01/16] armv7/ls1021a: move ns_access to common file   Gong Qianyu
• [U-Boot] [Patch V3 02/16] common/board_f.c: modify the macro to use get_clocks() more common   Gong Qianyu
• [U-Boot] [Patch V3 03/16] net/fm: Fix the endian issue to support both   Gong Qianyu
• [U-Boot] [Patch V3 04/16] net/fm/eth: Use mb() to be compatible for both ARM and PowerPC   Gong Qianyu
• [U-Boot] [Patch V3 05/16] net/fm: Add support for 64-bit platforms   Gong Qianyu
• [U-Boot] [Patch V3 06/16] net/fm: Make the return value logic consistent with convention   Gong Qianyu
• [U-Boot] [Patch V3 07/16] net/fm: bug fix when CONFIG_PHYLIB not defined   Gong Qianyu
• [U-Boot] [Patch V3 08/16] net: Move some header files to include/   Gong Qianyu
• [U-Boot] [Patch V3 09/16] net/fm: Add QSGMII PCS init   Gong Qianyu
• [U-Boot] [Patch V3 10/16] net/fm: fix MDIO controller base on FMAN2   Gong Qianyu
• [U-Boot] [Patch V3 11/16] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC   Gong Qianyu
• [U-Boot] [Patch V3 12/16] armv8/ls1043ardb: Add LS1043ARDB board support   Gong Qianyu
• [U-Boot] [Patch V3 13/16] armv8/ls1043ardb: Add nand boot support   Gong Qianyu
• [U-Boot] [Patch V3 14/16] armv8/ls1043a: Add Fman support   Gong Qianyu
• [U-Boot] [Patch V3 15/16] armv8/ls1043ardb: esdhc: Add esdhc support for ls1043ardb   Gong Qianyu
• [U-Boot] [Patch V3 16/16] armv8/ls1043ardb: Add sd boot support   Gong Qianyu
• [U-Boot] [PATCH 1/2] ARM: tegra124: Clear IDDQ when enabling PLLC   Thierry Reding
• [U-Boot] [PATCH 2/2] ARM: tegra114: Clear IDDQ when enabling PLLC   Thierry Reding
• [U-Boot] [PATCH 1/2] ARM: tegra124: Clear IDDQ when enabling PLLC   Thierry Reding
• [U-Boot] [PATCH 2/2] ARM: tegra114: Clear IDDQ when enabling PLLC   Thierry Reding
• [U-Boot] [PATCH 1/3] tpm: Move tpm_tis_i2c to tpm_i2c_infineon   Christophe Ricard
• [U-Boot] [PATCH v2 0/4] Move tpm_tis_i2c to tpm_tis_infineon and convert last tpm driver to use DM_TPM   Christophe Ricard
• [U-Boot] [PATCH v2 1/4] dm: tpm: Move tpm_tis_i2c to tpm_i2c_infineon   Christophe Ricard
• [U-Boot] [PATCH v2 2/4] dm: tpm: Add Driver Model support for tpm_atmel_twi driver   Christophe Ricard
• [U-Boot] [PATCH v2 3/4] dm: tpm: Remove every compilation switch for TPM driver model   Christophe Ricard
• [U-Boot] [PATCH v2 4/4] dm: tpm: Every TPM drivers should depends on DM_TPM   Christophe Ricard
• [U-Boot] [PATCH v3 0/4] Move tpm_tis_i2c to tpm_tis_infineon and convert last tpm driver to use DM_TPM   Christophe Ricard
• [U-Boot] [PATCH v3 1/4] dm: tpm: Move tpm_tis_i2c to tpm_i2c_infineon   Christophe Ricard
• [U-Boot] [PATCH v3 2/4] dm: tpm: Add Driver Model support for tpm_atmel_twi driver   Christophe Ricard
• [U-Boot] [PATCH v3 3/4] dm: tpm: Remove every compilation switch for TPM driver model   Christophe Ricard
• [U-Boot] [PATCH v3 4/4] dm: tpm: Every TPM drivers should depends on DM_TPM   Christophe Ricard
• [U-Boot] [PATCH v3 0/4] Move tpm_tis_i2c to tpm_tis_infineon and convert last tpm driver to use DM_TPM   Christophe Ricard
• [U-Boot] [PATCH 00/19] Janitorial: powerpc: remove PowerPC non-generic boards   Tom Rini
• [U-Boot] [PATCH 03/45] arm: Remove most LaCie boards   Tom Rini
• [U-Boot] [PATCH 0/6] device model bringup of cpsw on am335x bone black   Tom Rini
• [U-Boot] [PATCH 2/6] am335x_evm: prepare for eth driver model support   Tom Rini
• [U-Boot] [PATCH 3/6] am335x_evm: do not define usb ether gadget when Eth DM is defined   Tom Rini
• [U-Boot] [PATCH 6/6] defconfig: am335x: bbb: enable ethernet driver model   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] What's purpose of DEV_FLAGS_SYSTEM and DEV_EXT_VIDEO?   Tom Rini
• [U-Boot] [PATCH] Convert omap3_logic to ti_omap3_common.h   Tom Rini
• [U-Boot] [PATCH 1/2] arch/arm/Kconfig: Add back in missing entries.   Tom Rini
• [U-Boot] [PATCH 2/2] configs/titanium_defconfig: Select MX6   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
• [U-Boot] [PATCH 1/2] arch/arm/Kconfig: Add back in missing entries.   Tom Rini
• [U-Boot] [PATCH 2/2] configs/titanium_defconfig: Select MX6   Tom Rini
• [U-Boot] serial: drop redundant depends on   Tom Rini
• [U-Boot] ea20: Convert to generic board   Tom Rini
• [U-Boot] [U-Boot,v2,1/9] powerpc: ppc4xx: remove alpr support   Tom Rini
• [U-Boot] [U-Boot, v2, 2/9] powerpc: ppc4xx: remove csb272, csb472 support   Tom Rini
• [U-Boot] [U-Boot, v2, 3/9] powerpc: ppc4xx: remove lwmon5 support   Tom Rini
• [U-Boot] [U-Boot, v2, 4/9] powerpc: ppc4xx: remove p3p440 support   Tom Rini
• [U-Boot] [U-Boot, v2, 5/9] powerpc: ppc4xx: remove pcs440ep support   Tom Rini
• [U-Boot] [U-Boot, v2, 6/9] powerpc: ppc4xx: remove sbc405 support   Tom Rini
• [U-Boot] [U-Boot,v2,7/9] powerpc: ppc4xx: remove zeus support   Tom Rini
• [U-Boot] [U-Boot, v2, 8/9] powerpc: mpc5xx: remove cmi_mpc5xx support   Tom Rini
• [U-Boot] [U-Boot, v2, 9/9] powerpc: mpc85xx: remove stxgp3, stxssa support   Tom Rini
• [U-Boot] Convert omap3_logic to ti_omap3_common.h   Tom Rini
• [U-Boot] [PATCH] FIX: fat: Provide correct return code from disk_{read|write} to upper layers   Tom Rini
• [U-Boot] [PATCH 1/3] omap3_evm_common.h: Switch to SYS_GENERIC_BOARD   Tom Rini
• [U-Boot] [PATCH 2/3] ti814x_evm: Switch to SYS_GENERIC_BOARD   Tom Rini
• [U-Boot] [PATCH 3/3] ti816x: Switch to SYS_GENERIC_BOARD   Tom Rini
• [U-Boot] [PATCH] doc: Fix inconsistent filename in PXE config example   Tom Rini
• [U-Boot] Please pull u-boot-rockchip.git   Tom Rini
• [U-Boot] [PATCH] doc: document the fdtdir PXE command   Tom Rini
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Tom Rini
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Tom Rini
• [U-Boot] [PATCH 01/13] mtd: uboot: Add meaningful error message   Tom Rini
• [U-Boot] [PATCH 02/13] sparse: Move main header parsing to a function of its own   Tom Rini
• [U-Boot] [PATCH 03/13] sparse: Refactor chunk parsing function   Tom Rini
• [U-Boot] [PATCH 05/13] sparse: Implement storage abstraction   Tom Rini
• [U-Boot] [PATCH 04/13] sparse: Simplify multiple logic   Tom Rini
• [U-Boot] [PATCH 06/13] fastboot: Move fastboot response functions to fastboot core   Tom Rini
• [U-Boot] [PATCH 07/13] fastboot: Implement NAND backend   Tom Rini
• [U-Boot] [PATCH 08/13] fastboot: nand: Add pre erase and write hooks   Tom Rini
• [U-Boot] [PATCH 09/13] sparse: Rename the file and header   Tom Rini
• [U-Boot] [PATCH 1/7] omap-common: Common omap_die_id definition   Tom Rini
• [U-Boot] [PATCH 2/7] omap3: omap_die_id support   Tom Rini
• [U-Boot] [PATCH 3/7] omap4: omap_die_id support   Tom Rini
• [U-Boot] [PATCH 4/7] omap5: omap_die_id support   Tom Rini
• [U-Boot] [PATCH 5/7] omap-common: Common serial and usbethaddr functions based on die id   Tom Rini
• [U-Boot] [PATCH 7/7] omap-common: Common get_board_serial function to pass serial through ATAG   Tom Rini
• [U-Boot] [PATCH 6/7] omap-common: Common function to display die id, replacing omap3-specific version   Tom Rini
• [U-Boot] [PATCH 04/13] sparse: Simplify multiple logic   Tom Rini
• [U-Boot] [PATCH 07/13] fastboot: Implement NAND backend   Tom Rini
• [U-Boot] [PATCH 06/13] fastboot: Move fastboot response functions to fastboot core   Tom Rini
• [U-Boot] please pull u-boot-arc master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [ANN] U-Boot v2015.10-rc3 released   Tom Rini
• [U-Boot] [PATCH 07/10] ARM: tegra: fix malloc region sizing   Tom Rini
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Tom Rini
• [U-Boot] [PATCH 7/8] ARM: hikey: hi6220: Migrate over to DM_SERIAL and UART3 for serial.   Tom Rini
• [U-Boot] [PATCH] fat: handle paths that include ../   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master   Tom Rini
• [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] git-mailrc: add Alexey as ARC maintainer   Tom Rini
• [U-Boot] fat: handle paths that include ../   Tom Rini
• [U-Boot] board/BuR: simplify default IP-setup on B&R boards.   Tom Rini
• [U-Boot] driver: misc: correct Kconfig entry   Tom Rini
• [U-Boot] lpc32xx: remove duplicated DMA_CLK_ENABLE bit definition   Tom Rini
• [U-Boot] ARM: DRA7: emif: Fix disabling/enabling of refreshes   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] ti_omap4_common: use ext4 fs as default.   Tom Rini
• [U-Boot] [U-Boot, v2, 2/3] ti_armv7_common: env: Consolidate MMC args   Tom Rini
• [U-Boot] [U-Boot, v2, 3/3] ti_armv7_common: env: Use partuuid for detecting mmc root fs   Tom Rini
• [U-Boot] [U-Boot,01/45] arm: Remove balloon3 board   Tom Rini
• [U-Boot] [U-Boot,02/45] arm: Remove eukrea boards   Tom Rini
• [U-Boot] [U-Boot, 04/45] arm: Remove snowball and u8500_href boards   Tom Rini
• [U-Boot] [U-Boot, 05/45] arm: Remove unmaintained davinci boards   Tom Rini
• [U-Boot] [U-Boot,06/45] arm: Remove d2net_v2 defconfig file   Tom Rini
• [U-Boot] [U-Boot,07/45] arm: Remove dig297 board   Tom Rini
• [U-Boot] [U-Boot, 08/45] arm: Remove eb_cpu9k2 and eb_cpu9k2_ram boards   Tom Rini
• [U-Boot] [U-Boot,10/45] arm: Remove enbw_cmc board   Tom Rini
• [U-Boot] [U-Boot,11/45] arm: Remove ima3-mx53 board   Tom Rini
• [U-Boot] [U-Boot, 12/45] arm: Remove imx27lite, imx27_litekit and magnesium boards   Tom Rini
• [U-Boot] [U-Boot,13/45] arm: Remove mx31_litekit board   Tom Rini
• [U-Boot] [U-Boot,14/45] arm: Remove inetspace_v2_cmc board   Tom Rini
• [U-Boot] [U-Boot,15/45] arm: Remove jornada board   Tom Rini
• [U-Boot] [U-Boot,16/45] arm: Remove lp8x4x board   Tom Rini
• [U-Boot] [U-Boot,18/45] arm: Remove mv88f6281gtw_ge board   Tom Rini
• [U-Boot] [U-Boot, 19/45] arm: Remove mx51_efikamx, mx51_efikasb boards   Tom Rini
• [U-Boot] [U-Boot, 20/45] arm: Remove nhk8815 boards and nomadik arch   Tom Rini
• [U-Boot] [U-Boot,22/45] arm: Remove omap3_mvblx board   Tom Rini
• [U-Boot] [U-Boot,23/45] arm: Remove omap3_sdp3430 board   Tom Rini
• [U-Boot] [U-Boot,24/45] arm: Remove openrd boards   Tom Rini
• [U-Boot] [U-Boot,25/45] arm: Remove otc570 board   Tom Rini
• [U-Boot] [U-Boot,26/45] arm: Remove palmld board   Tom Rini
• [U-Boot] [U-Boot,27/45] arm: Remove palmtc board   Tom Rini
• [U-Boot] [U-Boot, 28/45] arm: Remove polaris and trizepsiv boards   Tom Rini
• [U-Boot] [U-Boot, 29/45] arm: Remove portuxg20, stamp9g20 boards   Tom Rini
• [U-Boot] [U-Boot,30/45] arm: Remove pxa255_idp, zipitz2 boards   Tom Rini
• [U-Boot] [U-Boot,31/45] arm: Remove qong board   Tom Rini
• [U-Boot] [U-Boot,32/45] arm: Remove rd6281a board   Tom Rini
• [U-Boot] [U-Boot,33/45] arm: Remove scb9328 board   Tom Rini
• [U-Boot] [U-Boot,34/45] arm: Remove tk71 board   Tom Rini
• [U-Boot] [U-Boot,35/45] arm: Remove tt01 board   Tom Rini
• [U-Boot] [U-Boot,36/45] arm: Remove versatileab board   Tom Rini
• [U-Boot] [U-Boot,37/45] arm: Remove vision2 board   Tom Rini
• [U-Boot] [U-Boot,38/45] arm: Remove vl_ma2sc board   Tom Rini
• [U-Boot] [U-Boot,39/45] arm: Remove vpac270_nor_128 board   Tom Rini
• [U-Boot] [U-Boot,40/45] arm: Remove xaeniax board   Tom Rini
• [U-Boot] [U-Boot,42/45] arm: Remove palmtreo680 board   Tom Rini
• [U-Boot] [U-Boot,45/45] arm: Remove tx25 board   Tom Rini
• [U-Boot] [U-Boot, 2/4] arm: spear: Add command to switch between 1-bit HW ECC and SW BCH4   Tom Rini
• [U-Boot] [U-Boot, 3/4] arm: spear: Add BCH4 SW support to SPEAr600 x600 board   Tom Rini
• [U-Boot] [U-Boot, 4/4] arm: spear: Enable THUMB mode on x600 board   Tom Rini
• [U-Boot] [U-Boot, 1/4, v2] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] Move malloc_cache_aligned() to its own header   Tom Rini
• [U-Boot] [U-Boot, v2, 2/2] Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h header   Tom Rini
• [U-Boot] [U-Boot, v2] include: configs: Enable DWC3 and DFU in OMAP5 uEVM   Tom Rini
• [U-Boot] FIX: fat: Provide correct return code from disk_{read|write} to upper layers   Tom Rini
• [U-Boot] [U-Boot, 01/10] usb: gadget: don't leak configs when unbinding   Tom Rini
• [U-Boot] [U-Boot, 02/10] ext4: avoid calling ext4fs_mount() twice, which leaks   Tom Rini
• [U-Boot] [U-Boot,03/10] ext4: free allocations by parse_path()   Tom Rini
• [U-Boot] [U-Boot,04/10] ext4: fix leak in check_filename()   Tom Rini
• [U-Boot] [U-Boot,05/10] dfu: don't keep freeing/reallocating   Tom Rini
• [U-Boot] [U-Boot,06/10] dfu: mmc: buffer file reads too   Tom Rini
• [U-Boot] [U-Boot,07/10] ARM: tegra: fix malloc region sizing   Tom Rini
• [U-Boot] [U-Boot,08/10] ARM: tegra: tweak DFU buffer sizes   Tom Rini
• [U-Boot] [U-Boot,09/10] ARM: tegra: enable filesystem writing   Tom Rini
• [U-Boot] [U-Boot,10/10] ARM: tegra: enable DFU for RAM   Tom Rini
• [U-Boot] [U-Boot, PATCHv4, 1/1] board: Add Toby-Churchill SL50 board support.   Tom Rini
• [U-Boot] [U-Boot, 1/2] igep00xx: MAINTAINERS: update eballetbo's email address.   Tom Rini
• [U-Boot] [U-Boot, 2/2] igep00x0: Switch to use the generic distro configuration and environment.   Tom Rini
• [U-Boot] fs: ext4: fix symlink read function   Tom Rini
• [U-Boot] [U-Boot,v5] bitops: introduce BIT() definition   Tom Rini
• [U-Boot] [U-Boot, 1/3] omap3: cm-t3517: enable 'netretry' and setup timeout   Tom Rini
• [U-Boot] [U-Boot,2/3] omap3: cm-t3517: fix MMC1 pinmux   Tom Rini
• [U-Boot] [U-Boot, v2, 3/3] omap3: cm-t3517: change environment size   Tom Rini
• [U-Boot] omap3: cm-t3517: define CONFIG_MACH_TYPE   Tom Rini
• [U-Boot] [U-Boot, v2, 1/1] gpio: lpc32xx: fix issues with port3 gpio   Tom Rini
• [U-Boot] [PATCH 1/2] ARM: cache: drop the empty dcache functions as we have it in lib/cache.c   Tom Rini
• [U-Boot] [U-Boot, 1/4, v2] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Tom Rini
• [U-Boot] [U-Boot, 1/4, v2] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] ARM: Kirkwood: enable generic board support for LaCie boards   Tom Rini
• [U-Boot] arm: move edb93xx to generic board architecture   Tom Rini
• [U-Boot] [U-Boot, v2] ARM: Kirkwood: fix IDE configuration on LaCie boards   Tom Rini
• [U-Boot] Pull request: u-boot-sh/rmobile   Tom Rini
• [U-Boot] [PATCH v2] malloc_simple: Add support for switching to DRAM heap   Tom Rini
• [U-Boot] [PATCH v2 1/2] sunxi: Enable CONFIG_SPL_STACK_R   Tom Rini
• [U-Boot] [PATCH v2 2/2] sunxi: Switch to using malloc_simple for the spl   Tom Rini
• [U-Boot] [PATCH] Revert "env_eeprom: Assign default environment during board_init_f"   Tom Rini
• [U-Boot] [PATCH 0/5] device model bringup of hsmmc on am335x bone black and gp evm   Tom Rini
• [U-Boot] [U-Boot, v5, 2/9] armv8: New MMU setup code allowing to use 48+ bits PA/VA   Tom Rini
• [U-Boot] [U-Boot, 1/3] omap3_evm_common.h: Switch to SYS_GENERIC_BOARD   Tom Rini
• [U-Boot] [U-Boot,2/3] ti814x_evm: Switch to SYS_GENERIC_BOARD   Tom Rini
• [U-Boot] [U-Boot,3/3] ti816x: Switch to SYS_GENERIC_BOARD   Tom Rini
• [U-Boot] [U-Boot, v1, 1/1] fix: possible overflow when copying the string   Tom Rini
• [U-Boot] [U-Boot, 1/2] FIX: env: import: hashtable: Prevent buffer overrun when importing environment from file   Tom Rini
• [U-Boot] [U-Boot, 2/2] FIX: env: import: hashtable: Free memory allocated before exiting from himport_r()   Tom Rini
• [U-Boot] mtd: nand: fsmc: Fixes and cleanup for fsmc_nand_switch_ecc()   Tom Rini
• [U-Boot] arm: Remove unused ST-Ericsson u8500 arch   Tom Rini
• [U-Boot] arm: Remove unused reference to nomadik   Tom Rini
• [U-Boot] api_storage: Fix non-first storage device enumeration   Tom Rini
• [U-Boot] [PATCH] Revert "env_eeprom: Assign default environment during board_init_f"   Tom Rini
• [U-Boot] kbuild: fixdep: drop meaningless hash table initialization   Tom Rini
• [U-Boot] Please pull u-boot-fdt.git   Tom Rini
• [U-Boot] [PATCH v2 1/4] dm: tpm: Move tpm_tis_i2c to tpm_i2c_infineon   Tom Rini
• [U-Boot] [PATCH v2 2/4] dm: tpm: Add Driver Model support for tpm_atmel_twi driver   Tom Rini
• [U-Boot] [PATCH v2 3/4] dm: tpm: Remove every compilation switch for TPM driver model   Tom Rini
• [U-Boot] [PATCH v2 4/4] dm: tpm: Every TPM drivers should depends on DM_TPM   Tom Rini
• [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] [PATCH 1/3] ti_omap4_common.h: Switch to CONFIG_OMAP_SERIAL for non-SPL DM_SERIAL   Tom Rini
• [U-Boot] [PATCH 2/3] ti_omap5_common.h: Switch to CONFIG_OMAP_SERIAL for non-SPL DM_SERIAL   Tom Rini
• [U-Boot] [PATCH 3/3] dra72_evm: Switch to DM_SERIAL   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Tom Rini
• [U-Boot] [PATCH 1/6] sunxi: Add an option to disable MMC   Tom Rini
• [U-Boot] [PATCH 2/6] fastboot: Implement OEM format only when we have MMC support   Tom Rini
• [U-Boot] [PATCH 3/6] sunxi: Add the R8 DTSI   Tom Rini
• [U-Boot] [PATCH 4/6] ARM: sun5i: dt: Move uart3 pinctrl node to common DTSI   Tom Rini
• [U-Boot] [PATCH 5/6] ARM: sun5i: dt: Add UART3 CTS and RTS pins   Tom Rini
• [U-Boot] [PATCH 6/6] sunxi: Add CHIP support   Tom Rini
• [U-Boot] [linux-sunxi] Re: [PATCH 3/6] sunxi: Add the R8 DTSI   Tom Rini
• [U-Boot] [linux-sunxi] Re: [PATCH 3/6] sunxi: Add the R8 DTSI   Tom Rini
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Tom Rini
• [U-Boot] [linux-sunxi] Re: [PATCH 3/6] sunxi: Add the R8 DTSI   Tom Rini
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Tom Rini
• [U-Boot] [PATCH v2 0/6] device model bringup of cpsw on am335x bone black   Tom Rini
• [U-Boot] Please pull u-boot-rockchip.git   Tom Rini
• [U-Boot] [PATCH 1/7] omap-common: Common omap_die_id definition   Tom Rini
• [U-Boot] [PATCH v2 6/6] defconfig: am335x: gp_evm: enable ethernet driver model   Tom Rini
• [U-Boot] [PATCH 1/5] omap_hsmmc: update struct hsmmc to accomodate base address from DT   Tom Rini
• [U-Boot] [PATCH 2/5] am335x_evm: mmc: do not define DM_MMC for spl   Tom Rini
• [U-Boot] [PATCH 3/5] drivers: mmc: omap_hsmmc: convert driver to adopt device driver model   Tom Rini
• [U-Boot] [PATCH 4/5] defconfig: am335x: bbb: enable ethernet driver model   Tom Rini
• [U-Boot] [PATCH 5/5] defconfig: am335x: gp_evm: enable ethernet driver model   Tom Rini
• [U-Boot] [PATCH] dra7xx: Add dra74_evm_defconfig using CONFIG_DM   Tom Rini
• [U-Boot] buildman toolchains   Tom Rini
• [U-Boot] Pull request: u-boot-uniphier/master   Tom Rini
• [U-Boot] [PATCH v2 2/8] ARM: hikey: Add ATF makefile referenced by README   Tom Rini
• [U-Boot] Please pull fsl-qoriq master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] pull request: u-boot-uniphier/master (2nd round)   Tom Rini
• [U-Boot] [PATCH 00/10] Kconfig and ti omap configs tidy up   Tom Rini
• [U-Boot] [PATCH 2/8] cmd: Convert CONFIG_CMD_ELF to Kconfig   Tom Rini
• [U-Boot] [PATCH 3/8] cmd: Clean up cmd_elf a little bit   Tom Rini
• [U-Boot] [PATCH 4/8] cmd: elf: Reorder load_elf_image_phdr() and load_elf_image_shdr()   Tom Rini
• [U-Boot] [PATCH 6/8] cmd: bootvx: Always get VxWorks bootline from env   Tom Rini
• [U-Boot] [PATCH 7/8] cmd: bootvx: Pass E820 information to an x86 VxWorks kernel   Tom Rini
• [U-Boot] [PATCH 8/8] doc: Complement document about booting VxWorks   Tom Rini
• [U-Boot] [PATCH 2/8] cmd: Convert CONFIG_CMD_ELF to Kconfig   Tom Rini
• [U-Boot] [PATCH 2/8] cmd: Convert CONFIG_CMD_ELF to Kconfig   Tom Rini
• [U-Boot] [PATCH RESPIN v2 01/13] Reorder defconfigs with 'savedefconfig'   Tom Rini
• [U-Boot] [PATCH v6 8/9] armv8: cavium: Add an implementation of ATF calling functions   Tom Rini
• [U-Boot] [PATCH v6 7/9] armv8: cavium: Add ThunderX 88xx board definition   Tom Rini
• [U-Boot] [PATCH 03/11] Kconfig: add CONFIG_SYS_BOOTM_LEN   Tom Rini
• [U-Boot] [PATCH 04/11] vexpress64: Kconfig: add CONFIG_SYS_BOOTM_LEN   Tom Rini
• [U-Boot] [PATCH 05/11] vexpress64: fvp dram: add DRAM configuration   Tom Rini
• [U-Boot] [PATCH 1/5] fs/fat/fat_write: Fix buffer alignments   Tom Rini
• [U-Boot] [PATCH 03/11] Kconfig: add CONFIG_SYS_BOOTM_LEN   Tom Rini
• [U-Boot] [PATCH v6 8/9] armv8: cavium: Add an implementation of ATF calling functions   Tom Rini
• [U-Boot] Please pull u-boot-ubi master   Tom Rini
• [U-Boot] [U-Boot, 01/10] configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST   Tom Rini
• [U-Boot] [U-Boot, 02/10] Kconfig: fix typo in CONFIG_FIT description   Tom Rini
• [U-Boot] malloc_simple: fix malloc_ptr calculation   Tom Rini
• [U-Boot] [U-Boot, v2, 1/8] ARM: hikey: Update README with various corrections   Tom Rini
• [U-Boot] [U-Boot, v2, 2/8] ARM: hikey: Add ATF makefile referenced by README   Tom Rini
• [U-Boot] [U-Boot, v2, 3/8] ARM: hikey: Use linux/sizes.h for malloc size   Tom Rini
• [U-Boot] [U-Boot, v2, 4/8] ARM: hi6220: Add UART0 and UART3 base addresses   Tom Rini
• [U-Boot] [U-Boot, v2, 5/8] ARM: hikey: Remove resetting gd->flags in board_init()   Tom Rini
• [U-Boot] [U-Boot, v2, 6/8] ARM: hikey: Select DM, DM_GPIO from Kconfig   Tom Rini
• [U-Boot] [U-Boot, v2, 7/8] ARM: hikey: hi6220: Migrate over to DM_SERIAL and use UART3 by default.   Tom Rini
• [U-Boot] [U-Boot, v2, 8/8] ARM: hikey: Adjust SDRAM_1_SIZE to 0x3EFFFFFF   Tom Rini
• [U-Boot] [U-Boot,2/6] arm: Remove da830evm board   Tom Rini
• [U-Boot] [U-Boot,3/6] arm: Remove wireless_space board   Tom Rini
• [U-Boot] [U-Boot,4/6] arm: Drop old non-generic-board code   Tom Rini
• [U-Boot] [U-Boot, v2] tools: gen_eth_addr: add getpid() to time(0) to avoid duplicated seed   Tom Rini
• [U-Boot] tools: moveconfig: Update the URL for nds32 toolchain   Tom Rini
• [U-Boot] mmc: dw_mmc: Increase timeout to 4 minutes (as in Linux kernel)   Tom Rini
• [U-Boot] am437x_evm: increase phy autoneg timeout   Tom Rini
• [U-Boot] [PATCH] mmc: dw_mmc: Increase timeout to 4 minutes (as in Linux kernel)   Tom Rini
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   Tom Rini
• [U-Boot] [PATCH 03/11] Kconfig: add CONFIG_SYS_BOOTM_LEN   Tom Rini
• [U-Boot] [PATCH 04/10] Kconfig: add CONFIG_CMD_BOOTZ   Tom Rini
• [U-Boot] [PATCH 05/10] ti: omap3: config: remove 1 from boolean define   Tom Rini
• [U-Boot] [PATCH V3 0/4] Fix fdt 'reg' parsing and unbreak few Exynos4 boards   Tom Rini
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Maxime Ripard
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Maxime Ripard
• [U-Boot] [PATCH 11/13] sunxi: Add support for android boot image   Maxime Ripard
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Maxime Ripard
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Maxime Ripard
• [U-Boot] [PATCH 11/13] sunxi: Add support for android boot image   Maxime Ripard
• [U-Boot] [PATCH 11/13] sunxi: Add support for android boot image   Maxime Ripard
• [U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller   Maxime Ripard
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Maxime Ripard
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Maxime Ripard
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Maxime Ripard
• [U-Boot] [PATCH 04/13] sparse: Simplify multiple logic   Maxime Ripard
• [U-Boot] [PATCH 09/13] sparse: Rename the file and header   Maxime Ripard
• [U-Boot] [PATCH 07/13] fastboot: Implement NAND backend   Maxime Ripard
• [U-Boot] [PATCH 06/13] fastboot: Move fastboot response functions to fastboot core   Maxime Ripard
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Maxime Ripard
• [U-Boot] [PATCH 04/13] sparse: Simplify multiple logic   Maxime Ripard
• [U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller   Maxime Ripard
• [U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller   Maxime Ripard
• [U-Boot] [PATCH 0/6] ARM: sunxi: Introduce CHIP support   Maxime Ripard
• [U-Boot] [PATCH 1/6] sunxi: Add an option to disable MMC   Maxime Ripard
• [U-Boot] [PATCH 2/6] fastboot: Implement OEM format only when we have MMC support   Maxime Ripard
• [U-Boot] [PATCH 3/6] sunxi: Add the R8 DTSI   Maxime Ripard
• [U-Boot] [PATCH 4/6] ARM: sun5i: dt: Move uart3 pinctrl node to common DTSI   Maxime Ripard
• [U-Boot] [PATCH 5/6] ARM: sun5i: dt: Add UART3 CTS and RTS pins   Maxime Ripard
• [U-Boot] [PATCH 6/6] sunxi: Add CHIP support   Maxime Ripard
• [U-Boot] [PATCH 2/6] fastboot: Implement OEM format only when we have MMC support   Maxime Ripard
• [U-Boot] [linux-sunxi] [PATCH 2/6] fastboot: Implement OEM format only when we have MMC support   Maxime Ripard
• [U-Boot] [linux-sunxi] [PATCH 1/6] sunxi: Add an option to disable MMC   Maxime Ripard
• [U-Boot] [PATCH 1/6] sunxi: Add an option to disable MMC   Maxime Ripard
• [U-Boot] [PATCH 3/6] sunxi: Add the R8 DTSI   Maxime Ripard
• [U-Boot] [linux-sunxi] Re: [PATCH 3/6] sunxi: Add the R8 DTSI   Maxime Ripard
• [U-Boot] [PATCH 3/6] sunxi: Add the R8 DTSI   Maxime Ripard
• [U-Boot] [PATCH 0/5] device model bringup of hsmmc on am335x bone black and gp evm   Peter Robinson
• [U-Boot] DM: Problem with DT bus translation dev_get_addr()   Stefan Roese
• [U-Boot] [PATCH v5 2/5] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Stefan Roese
• [U-Boot] [PATCH] tools/kwboot.c: Support UART fallback mode   Stefan Roese
• [U-Boot] DM: Problem with DT bus translation dev_get_addr()   Stefan Roese
• [U-Boot] DM: Problem with DT bus translation dev_get_addr()   Stefan Roese
• [U-Boot] [PATCH] dm: core: Enable optional use of fdt_translate_address()   Stefan Roese
• [U-Boot] [PATCH v6] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Stefan Roese
• [U-Boot] [PATCH 1/4] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Stefan Roese
• [U-Boot] [PATCH 2/4] arm: spear: Add command to switch between 1-bit HW ECC and SW BCH4   Stefan Roese
• [U-Boot] [PATCH 3/4] arm: spear: Add BCH4 SW support to SPEAr600 x600 board   Stefan Roese
• [U-Boot] [PATCH 4/4] arm: spear: Enable THUMB mode on x600 board   Stefan Roese
• [U-Boot] [PATCH 1/4 v2] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Stefan Roese
• [U-Boot] v2015.10-rc2: timer not initialized on Kirkwood   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: timer.c: Explicitly move "init_done" var to data section   Stefan Roese
• [U-Boot] [PATCH 1/7] kwbimage: Align payload size to 4 bytes   Stefan Roese
• [U-Boot] [PATCH 2/7] arm: mvebu: Do not call board_init_r() from board_init_f()   Stefan Roese
• [U-Boot] [PATCH 3/7] arm: mvebu: Add basic Armada XP / 38x dtsi/dts files   Stefan Roese
• [U-Boot] [PATCH 4/7] arm: mvebu: Add DM (driver model) support   Stefan Roese
• [U-Boot] [PATCH 5/7] usb: ehci-marvell.c: Add DM support   Stefan Roese
• [U-Boot] [PATCH 6/7] arm: mvebu: Enable DM_USB on AXP / A38x boards   Stefan Roese
• [U-Boot] [PATCH 7/7] arm: mvebu: Enable DM_SERIAL on AXP / A38x boards   Stefan Roese
• [U-Boot] [PATCH 5/7] usb: ehci-marvell.c: Add DM support   Stefan Roese
• [U-Boot] [PATCH 5/7] usb: ehci-marvell.c: Add DM support   Stefan Roese
• [U-Boot] [PATCH v2] dm: core: Enable optional use of fdt_translate_address()   Stefan Roese
• [U-Boot] [PATCH] sunxi_nand_spl: Add config parameter for 4KiB page sized NAND devices   Stefan Roese
• [U-Boot] arm: mvebu: u-boot does not start on db-88f6820-gp   Stefan Roese
• [U-Boot] arm: mvebu: u-boot does not start on db-88f6820-gp   Stefan Roese
• [U-Boot] [PATCH 1/2] mx6: remove SYS_SOC from board Kconfig   Stefan Roese
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Stefan Roese
• [U-Boot] [PATCH v3 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Stefan Roese
• [U-Boot] [PATCH] dm: core: Enable optional use of fdt_translate_address()   Stefan Roese
• [U-Boot] [PATCH] dm: core: Enable optional use of fdt_translate_address()   Stefan Roese
• [U-Boot] [PATCH 1/4 v2] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Stefan Roese
• [U-Boot] [PATCH 1/4 v3] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Stefan Roese
• [U-Boot] arm: mvebu: u-boot does not start on db-88f6820-gp   Stefan Roese
• [U-Boot] [PATCH v6] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Stefan Roese
• [U-Boot] [PATCH] dm: core: Enable optional use of fdt_translate_address()   Stefan Roese
• [U-Boot] [U-Boot, 1/4, v2] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Stefan Roese
• [U-Boot] [PATCH 1/2] nios2: remap and translate reg address in device tree   Stefan Roese
• [U-Boot] [PATCH] mtd: nand: fsmc: Fixes and cleanup for fsmc_nand_switch_ecc()   Stefan Roese
• [U-Boot] [PATCH] arm: Remove unused ST-Ericsson u8500 arch   Stefan Roese
• [U-Boot] [PATCH] arm: Remove unused reference to nomadik   Stefan Roese
• [U-Boot] [PATCH] ARM: socfpga: Enable saveenv for SD/MMC   Stefan Roese
• [U-Boot] [PATCH] arm: socfpga: Fix cache configuration   Stefan Roese
• [U-Boot] [PATCH] arm: socfpga: Fix cache configuration   Stefan Roese
• [U-Boot] [PATCH] arm: socfpga: Fix cache configuration   Stefan Roese
• [U-Boot] [PATCH 2/2] spi: Add SPI NOR protection mechanism   Stefan Roese
• [U-Boot] [PATCH] tools: kwboot: Add support for UART boot mode patching for Armada XP/38x   Stefan Roese
• [U-Boot] [PATCH v2 2/2] nios2: convert altera sysid to driver model   Stefan Roese
• [U-Boot] [PATCH v3] dm: core: Enable optional use of fdt_translate_address()   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: Fix internal register config on A38x   Stefan Roese
• [U-Boot] [PATCH] malloc_simple: fix malloc_ptr calculation   Philipp Rosenberger
• [U-Boot] [PATCH 1/5] spi_sf: Skip the erasing of protected sectors   Otavio Salvador
• [U-Boot] [PATCH 2/5] spi_flash: Include spi_flash_cmd_write_status() prototype   Otavio Salvador
• [U-Boot] [PATCH 3/5] cgtqmx6eval: Add SPI NOR flash support   Otavio Salvador
• [U-Boot] [PATCH 4/5] cgtqmx6eval: Use SPI NOR to store the environment   Otavio Salvador
• [U-Boot] [PATCH 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Otavio Salvador
• [U-Boot] mkimage: mxs (mx23_olinuxino) build regression   Otavio Salvador
• [U-Boot] [PATCH 1/5] spi_sf: Skip the erasing of protected sectors   Otavio Salvador
• [U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT   Otavio Salvador
• [U-Boot] [PATCH v2 1/5] spi_sf: Skip the erasing of protected sectors   Otavio Salvador
• [U-Boot] [PATCH v2 2/5] spi_flash: Include spi_flash_cmd_write_status() prototype   Otavio Salvador
• [U-Boot] [PATCH v2 3/5] cgtqmx6eval: Add SPI NOR flash support   Otavio Salvador
• [U-Boot] [PATCH v2 4/5] cgtqmx6eval: Use SPI NOR to store the environment   Otavio Salvador
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Otavio Salvador
• [U-Boot] [PATCH 1/3] cgtqmx6eval: Fit into a single line   Otavio Salvador
• [U-Boot] [PATCH 2/3] cgtqmx6eval: Add a maintainer entry   Otavio Salvador
• [U-Boot] [PATCH 3/3] cgtqmx6eval: Add USB Mass Storage support   Otavio Salvador
• [U-Boot] [PATCH 0/3] Pending patches for Congatec QMX6 SPL support   Otavio Salvador
• [U-Boot] [PATCH 1/3] cgtqmx6eval: Add fastboot support   Otavio Salvador
• [U-Boot] [PATCH 2/3] cgtqmx6eval: Add SPL support   Otavio Salvador
• [U-Boot] [PATCH 3/3] iomux-v3: Take MX6D in consideration for imx_iomux_v3_setup_pad()   Otavio Salvador
• [U-Boot] SPI pending patches   Otavio Salvador
• [U-Boot] SPI pending patches   Otavio Salvador
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Otavio Salvador
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Otavio Salvador
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Otavio Salvador
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Otavio Salvador
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Otavio Salvador
• [U-Boot] Compiling u-boot (sunxi/next)   Olliver Schinagl
• [U-Boot] Compiling u-boot (sunxi/next)   Olliver Schinagl
• [U-Boot] [PATCH 1/4] sunxi_nand_spl: Rename SPL_NAND_SUNXIto NAND_SUNXI   Olliver Schinagl
• [U-Boot] [PATCH 1/4] sunxi_nand_spl: Rename SPL_NAND_SUNXIto NAND_SUNXI   Olliver Schinagl
• [U-Boot] [PATCH 1/1] Kconfig: net: give PHYLIB to designware driver   Olliver Schinagl
• [U-Boot] [PATCH 1/1] Kconfig: net: give PHYLIB to designware driver   Olliver Schinagl
• [U-Boot] [PATCH 1/1] Kconfig: net: give PHYLIB to designware driver   Olliver Schinagl
• [U-Boot] [PATCH 1/4] sunxi_nand_spl: Rename SPL_NAND_SUNXIto NAND_SUNXI   Olliver Schinagl
• [U-Boot] [PATCH v3 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Hannes Schmelzer
• [U-Boot] [PATCH v3 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Hannes Schmelzer
• [U-Boot] ZYNQ, ZC702 getting started   Hannes Schmelzer
• [U-Boot] ZYNQ, ZC702 getting started   Hannes Schmelzer
• [U-Boot] ZYNQ, ZC702 getting started   Hannes Schmelzer
• [U-Boot] [PATCH] board/BuR/kwb: implement board-specific do_go_exec to form vxWorks bootline   Hannes Schmelzer
• [U-Boot] [PATCH] board/BuR/kwb: implement board-specific do_go_exec to form vxWorks bootline   Hannes Schmelzer
• [U-Boot] Antwort: Re: Re: [PATCH] board/BuR/kwb: implement board-specific do_go_exec to form vxWorks bootline   Hannes Schmelzer
• [U-Boot] [PATCH] board/BuR/kwb: implement board-specific do_go_exec to form vxWorks bootline   Hannes Schmelzer
• [U-Boot] [PATCH] board/BuR/kwb: implement board-specific do_go_exec to form vxWorks bootline   Hannes Schmelzer
• [U-Boot] [PATCH v2] board/BuR/kwb: use bootvx(...) (with bootline feature) instead go(...)   Hannes Schmelzer
• [U-Boot] [PATCH v2 06/13] cmd: Convert CONFIG_CMD_ELF to Kconfig   Hannes Schmelzer
• [U-Boot] [PATCH v2 07/13] cmd: Clean up cmd_elf a little bit   Hannes Schmelzer
• [U-Boot] [PATCH v2 10/13] cmd: bootvx: Always get VxWorks bootline from env   Hannes Schmelzer
• [U-Boot] [PATCH] net: bootp fix vci string on SPL-Boot   Hannes Schmelzer
• [U-Boot] Antwort: Re: [PATCH] net: bootp fix vci string on SPL-Boot   Hannes Schmelzer
• [U-Boot] [PATCH v2 1/4] ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use   Heiko Schocher
• [U-Boot] [PATCH v2 1/4] ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use   Heiko Schocher
• [U-Boot] [PATCH v4 1/4] bitops: introduce BIT() definition   Heiko Schocher
• [U-Boot] [PATCH v3 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Heiko Schocher
• [U-Boot] [PATCH v5 0/3] add dfu support for at91 sam9260 based boards   Heiko Schocher
• [U-Boot] [PATCH v5 1/3] usb: gadget: at91_udc: port linux driver at91_udc   Heiko Schocher
• [U-Boot] [PATCH v5 2/3] usb: gadget: at91_udc: add at91_udc into U-Boot   Heiko Schocher
• [U-Boot] [PATCH v5 3/3] at91, taurus, smartweb: add dfu support   Heiko Schocher
• [U-Boot] [PATCH v5 3/3] at91, taurus, smartweb: add dfu support   Heiko Schocher
• [U-Boot] U-boot UBI breaks build with -O0   Heiko Schocher
• [U-Boot] [PATCH] imx6, aristaintetos2: add me as maintainer   Heiko Schocher
• [U-Boot] SPL boot with NAND on i.MX6 data abort   Heiko Schocher
• [U-Boot] [PATCH v1 0/2] arm, imx6, aristainetos2: set gpr register after reset   Heiko Schocher
• [U-Boot] [PATCH v1 1/2] arm, imx: add some gpr register defines   Heiko Schocher
• [U-Boot] [PATCH v1 2/2] arm, imx6, aristainetos2: set gpr register after reset   Heiko Schocher
• [U-Boot] [PATCH] arm, at91: small updates for the smartweb board   Heiko Schocher
• [U-Boot] Please pull u-boot-ubi master   Heiko Schocher
• [U-Boot] [PATCH] arm, at91: small updates for the smartweb board   Heiko Schocher
• [U-Boot] [PATCH v2] arm, at91: small updates for the smartweb board   Heiko Schocher
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Chin Liang See
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Chin Liang See
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Chin Liang See
• [U-Boot] [PATCH] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Chin Liang See
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
• [U-Boot] [PATCH] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Chin Liang See
• [U-Boot] [PATCH] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Chin Liang See
• [U-Boot] [PATCH] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Chin Liang See
• [U-Boot] [PATCHv2] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Chin Liang See
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
• [U-Boot] [PATCH 1/4] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Chin Liang See
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Chin Liang See
• [U-Boot] [PATCH 3/4] spi: cadence_qspi: Ensure check for max frequency in place   Chin Liang See
• [U-Boot] [PATCH 4/4] arm: dts: socfpga: Increase the spi-max-frequency for QSPI flash   Chin Liang See
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
• [U-Boot] [PATCH 1/4] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Chin Liang See
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Chin Liang See
• [U-Boot] [PATCH 1/4] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Chin Liang See
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Chin Liang See
• [U-Boot] [PATCH 3/4] spi: cadence_qspi: Ensure check for max frequency in place   Chin Liang See
• [U-Boot] [PATCH 4/4] arm: dts: socfpga: Increase the spi-max-frequency for QSPI flash   Chin Liang See
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
• [U-Boot] [PATCH v3 1/2] mmc: socfpga_dw_mmc: Enable calibration for drvsel and smpsel   Chin Liang See
• [U-Boot] [PATCH v3 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Chin Liang See
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Chin Liang See
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Chin Liang See
• [U-Boot] [PATCH 3/4] spi: cadence_qspi: Ensure check for max frequency in place   Chin Liang See
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Chin Liang See
• [U-Boot] [PATCH v3 1/5] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Chin Liang See
• [U-Boot] [PATCH v3 2/5] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Chin Liang See
• [U-Boot] [PATCH v3 3/5] spi: cadence_qspi: Ensure check for max frequency in place   Chin Liang See
• [U-Boot] [PATCH v3 4/5] arm: dts: socfpga: Increase the spi-max-frequency for QSPI flash   Chin Liang See
• [U-Boot] [PATCH v3 5/5] common: Enable fdt_support in SPL build   Chin Liang See
• [U-Boot] [PATCH 1/3] arm: socfpga: rename socfpga_cyclone5 and socfpga_arria5 config files   Chin Liang See
• [U-Boot] [PATCH 2/3] arm: socfpga: update MAINTAINERS' file for cyclone5_socdk and arria5_socdk   Chin Liang See
• [U-Boot] [PATCH v3 5/5] common: Enable fdt_support in SPL build   Chin Liang See
• [U-Boot] [PATCH v3 1/5] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Chin Liang See
• [U-Boot] [PATCH] nios2: add clear and set bits macros   Chin Liang See
• [U-Boot] [PATCH v2 2/2] nios2: convert altera timer to driver model   Chin Liang See
• [U-Boot] [PATCH v3 1/5] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Chin Liang See
• [U-Boot] [PATCH v3 5/5] common: Enable fdt_support in SPL build   Chin Liang See
• [U-Boot] [PATCH 2/2] nios2: convert altera sysid to driver model   Chin Liang See
• [U-Boot] [PATCH v3] nios2 : convert altera_pio to driver model   Chin Liang See
• [U-Boot] marvell: problems reading ddr spd   Stas Sergeev
• [U-Boot] [PATCHv4 0/1] Add Toby-Churchill SL50 board support   Enric Balletbo i Serra
• [U-Boot] [PATCHv4 1/1] board: Add Toby-Churchill SL50 board support.   Enric Balletbo i Serra
• [U-Boot] [PATCH 0/2] igep00x0: standardize boot commmands   Enric Balletbo i Serra
• [U-Boot] [PATCH 1/2] igep00xx: MAINTAINERS: update eballetbo's email address.   Enric Balletbo i Serra
• [U-Boot] [PATCH 2/2] igep00x0: Switch to use the generic distro configuration and environment.   Enric Balletbo i Serra
• [U-Boot] Fastboot is not detected   Bo Shen
• [U-Boot] [PATCH] arm: at91: clock: Add the generated clock support   Bo Shen
• [U-Boot] [PATCH] arm: at91: clock: Add the generated clock support   Bo Shen
• [U-Boot] [PATCH] ARM: at91: sama5: add support for CONFIG_ENV_IS_IN_MMC   Bo Shen
• [U-Boot] [PATCH] mmc: atmel: Add support fo atmel sdhci   Bo Shen
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Siarhei Siamashka
• [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: Ensure that 'mksunxiboot' tool produces deterministic output   Siarhei Siamashka
• [U-Boot] [PATCH] RFC: dm: Add proposed timeline and guide for porting serial drivers   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: Fix wrong serial console setup in Forfun Q88DB tablet   Siarhei Siamashka
• [U-Boot] [PATCH] sunxi: Fix wrong serial console setup in Forfun Q88DB tablet   Siarhei Siamashka
• [U-Boot] [RFC PATCH 2/2] sunxi: add "fel" boot target   Siarhei Siamashka
• [U-Boot] [PATCH v2 2/3] sunxi: retrieve FEL-provided values to environment variables   Siarhei Siamashka
• [U-Boot] [PATCH v2 1/3] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant   Siarhei Siamashka
• [U-Boot] [PATCH v2 3/3] sunxi: add "fel" boot target   Siarhei Siamashka
• [U-Boot] [PATCH v2 0/3] sunxi: support FEL-provided environment vars and "fel" boot target   Siarhei Siamashka
• [U-Boot] Improving DRAM settings for Allwinner A10/A13/A20 devices   Siarhei Siamashka
• [U-Boot] [RFC PATCH 2/2] sunxi: add "fel" boot target   Siarhei Siamashka
• [U-Boot] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH   Siarhei Siamashka
• [U-Boot] [PATCH v4 13/16] spi: Kconfig: Add Zynq QSPI controller entry   Michal Simek
• [U-Boot] [PATCH v4 10/16] zynq-common: Enable zynq qspi controller support   Michal Simek
• [U-Boot] [PATCH v4 07/16] dts: zc770-xm010: Enable zynq qspi controller node   Michal Simek
• [U-Boot] [PATCH v4 00/16] spi: zynq qspi support   Michal Simek
• [U-Boot] [PATCH v2 7/8] zynq: Move SPL console init out of board_init_f()   Michal Simek
• [U-Boot] [PATCH v2 6/8] microblaze: Add a TODO to call board_init_f_mem()   Michal Simek
• [U-Boot] [PATCH v2 8/8] Revert "ARM: zynq: disable CONFIG_SYS_MALLOC_F to fix MMC boot"   Michal Simek
• [U-Boot] [PATCH v4 07/16] dts: zc770-xm010: Enable zynq qspi controller node   Michal Simek
• [U-Boot] [PATCH v2 0/8] arm: Tidy up early init   Michal Simek
• [U-Boot] [PATCH] dts: Add a comment about CONFIG_OF_EMBED being for local use   Michal Simek
• [U-Boot] [PATCH 07/13] arm: zynq: Use separate device tree instead of embedded   Michal Simek
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Michal Simek
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Michal Simek
• [U-Boot] [PATCH 13/13] arm: zynq: Move serial driver to driver model   Michal Simek
• [U-Boot] [PATCH 00/13] dm: arm: zynq: Convert serial driver to driver model   Michal Simek
• [U-Boot] [PATCH 00/13] dm: arm: zynq: Convert serial driver to driver model   Michal Simek
• [U-Boot] [PATCH 00/13] dm: arm: zynq: Convert serial driver to driver model   Michal Simek
• [U-Boot] [PATCH v2 0/8] arm: Tidy up early init   Michal Simek
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Michal Simek
• [U-Boot] [PATCH 00/13] dm: arm: zynq: Convert serial driver to driver model   Michal Simek
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Michal Simek
• [U-Boot] [PATCH v5 07/16] dts: zc770-xm010: Enable zynq qspi controller node   Michal Simek
• [U-Boot] [PATCH v5 13/16] spi: Kconfig: Add Zynq QSPI controller entry   Michal Simek
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Michal Simek
• [U-Boot] Zynq build failure   Michal Simek
• [U-Boot] Pull-request: u-boot-spi/master   Michal Simek
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Michal Simek
• [U-Boot] Pull-request: u-boot-spi/master   Michal Simek
• [U-Boot] Pull-request: u-boot-spi/master   Michal Simek
• [U-Boot] [PATCH 0/2] Small Configuration tweaks for rockchip/firefly   Sjoerd Simons
• [U-Boot] [PATCH 1/2] rockchip: Also load the initrd below 512M   Sjoerd Simons
• [U-Boot] [PATCH 2/2] rockchip: firefly: Save the environment on SD card   Sjoerd Simons
• [U-Boot] U-boot hang on Renesas porter   Sjoerd Simons
• [U-Boot] malloc_simple: fix malloc_ptr calculation   Sjoerd Simons
• [U-Boot] PCI configuration Issue for QEMU ACPI Support   Saket Sinha
• [U-Boot] PCI issues for bringing up ACPI support on QEMU and Minnowmax target   Saket Sinha
• [U-Boot] [PATCH] semihosting: Improve ARMv7A support   Andrey Smirnov
• [U-Boot] U-boot UBI breaks build with -O0   Kevin Smith
• [U-Boot] [PATCH] ubifs: Add missing macros for U-boot build   Kevin Smith
• [U-Boot] [PATCH] tools: kwboot: Add support for UART boot mode patching for Armada XP/38x   Kevin Smith
• [U-Boot] SPL boot with NAND on i.MX6 data abort   Markus Stelzhammer
• [U-Boot] SPL boot with NAND on i.MX6 data abort   Markus Stelzhammer
• [U-Boot] [PATCH] net: Increase the size of the net_boot_file_name buffer   Jacob Stiffler
• [U-Boot] ls2085ardb not booting   York Sun
• [U-Boot] [PATCH 00/19] Janitorial: powerpc: remove PowerPC non-generic boards   York Sun
• [U-Boot] [PATCH 5/5] sbc8641d: enable and test CONFIG_SYS_GENERIC_BOARD   York Sun
• [U-Boot] [PATCH 1/2] rtc:ds3232/ds3231: Add support to generate 32KHz output   York Sun
• [U-Boot] [PATCH 2/2] armv8/ls2085aqds: enable 32KHz rtc output   York Sun
• [U-Boot] [RESEND PATCH 1/1] armv8: Add framework for CCN-504 interconnect configuration   York Sun
• [U-Boot] [PATCH] armv8/ls2085a_simu: enable eSDHC   York Sun
• [U-Boot] [PATCH 4/4][v8] SECURE_BOOT: Disable IE Key feature for RAMBOOT   York Sun
• [U-Boot] [PATCH] armv8: ls2085a: Update bootargs as per default target console   York Sun
• [U-Boot] [PATCH] armv8: ls2085a: Add support of CONFIG_CMD_GREPENV   York Sun
• [U-Boot] [PATCH 1/4] armv8: ls2085a: Update serdes1_cfg_tbl for 0x33 & 0x35 protocol   York Sun
• [U-Boot] [PATCH 2/4] armv8: fsl-lsch3: Initiaze 4 MACs per QSGMII in dpmac_info   York Sun
• [U-Boot] [PATCH 3/4] net: phy/vitesse: Add support for VSC8584 phy   York Sun
• [U-Boot] [PATCH 4/4] armv8: ls2085qds: Add support of X-QSGMII-16PORT riser card   York Sun
• [U-Boot] [PATCH][v3] driver: misc: debug server: Update Error message   York Sun
• [U-Boot] [PATCH] ls102xa: etsec: Use proper settings for BE BDs   York Sun
• [U-Boot] [PATCH v2 1/2] armv8/ls2085a_emu: Drop DDR3 emulation target   York Sun
• [U-Boot] [PATCH v2 1/1] arm/ls102xa:add hwconfig setting to support disable unused devices.   York Sun
• [U-Boot] [PATCH v3] armv8: fsl-lsch3: Rewrite MMU translation table entries   York Sun
• [U-Boot] [PATCH] pci/layerscape: Setup mmu-masters property for the PCIe   York Sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] [PATCH 2/2] fdt_support: Don't panic if unable to perform stdout fixup   York Sun
• [U-Boot] [PATCH v1] common: Fix load and entry addresses in FIT image   York Sun
• [U-Boot] [PATCH] Fix FSL DDR clock adjust calculation.   York Sun
• [U-Boot] [PATCH] Fix FSL DDR clock adjust calculation.   York Sun
• [U-Boot] [PATCH] Fix FSL DDR clock adjust calculation.   York Sun
• [U-Boot] [PATCH v1] common: Fix load and entry addresses in FIT image   York Sun
• [U-Boot] [PATCH] powerpc/t1024qds: Add missing T1024QDS_DDR4_defconfig   York Sun
• [U-Boot] [PATCH v2 2/2] powerpc/defconfig: Rename defconfig file for T1040QDS/T1024QDS DDR4 targets   York Sun
• [U-Boot] [PATCH v1 1/2] powerpc: configs: Fix init_ram physical address for several boards   York Sun
• [U-Boot] [PATCH v1 2/2] powerpc: e6500: Lock/unlock L2 cache instead of L1 as init_ram   York Sun
• [U-Boot] [v2] net/fman: Support both new and legacy FMan Compatibles   York Sun
• [U-Boot] [PATCH] powerpc: convert selected boards to generic board structure   York Sun
• [U-Boot] [PATCH] powerpc/t1023rdb: change default core frequency to 1200MHz   York Sun
• [U-Boot] Please pull u-boot-mpc85xx master   York Sun
• [U-Boot] [PATCH v2] common: Fix load and entry addresses in FIT image   York Sun
• [U-Boot] FSL DDR3/4 wrlvl_override question   York Sun
• [U-Boot] FSL DDR3/4 wrlvl_override question   York Sun
• [U-Boot] [PATCH v2] common: Fix load and entry addresses in FIT image   York Sun
• [U-Boot] [PATCH v2] common: Fix load and entry addresses in FIT image   York Sun
• [U-Boot] [PATCH v3] common: Fix load and entry addresses in FIT image   York Sun
• [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: enable dat[4:7] for eMMC4.5   York Sun
• [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: enable dat[4:7] for eMMC4.5   York Sun
• [U-Boot] [Patch v2 01/16] ARMv7/ls1021a: move ns_access to common file   York Sun
• [U-Boot] [Patch v2 02/16] common/board_f.c: modify the macro to use get_clocks() more common   York Sun
• [U-Boot] [Patch v2 03/16] net/fm: Fix the endian issue of ucode uploading to IRAM   York Sun
• [U-Boot] [Patch v2 09/16] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC   York Sun
• [U-Boot] [Patch v2 10/16] ARMv8/ls1043ardb: Add LS1043ARDB board support   York Sun
• [U-Boot] [Patch v2 16/16] armv8/ls1043ardb: Add cpld command to boot from sd   York Sun
• [U-Boot] [Patch v2 12/16] armv8/ls1043ardb: Add cpld command to boot from nand   York Sun
• [U-Boot] [Patch v2 02/16] common/board_f.c: modify the macro to use get_clocks() more common   York Sun
• [U-Boot] [PATCH v3 00/16] Add more commands for VSC9953 L2 Switch   York Sun
• [U-Boot] Please pull fsl-qoriq master   York Sun
• [U-Boot] [Patch v2 02/16] common/board_f.c: modify the macro to use get_clocks() more common   York Sun
• [U-Boot] [Patch V3 11/16] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC   York Sun
• [U-Boot] [Patch v2 09/16] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC   York Sun
• [U-Boot] [ANN] U-Boot v2015.10-rc4 released   York Sun
• [U-Boot] using boot.scr or uEnv.txt with FIT images   Ramakrishnan Meenakshi Sundaram
• [U-Boot] using boot.scr or uEnv.txt with FIT images   Ramakrishnan Meenakshi Sundaram
• [U-Boot] [PATCH 2/2][V2] pci/layerscape: Add EP mode support   Edward L Swarthout
• [U-Boot] [PATCH v2 0/8] nios2: add device tree control of U-Boot   Ley Foon Tan
• [U-Boot] [PATCH v5 29/41] rockchip: Add SPI driver   Jagan Teki
• [U-Boot] [PATCH v4 00/16] spi: zynq qspi support   Jagan Teki
• [U-Boot] [PATCH v4 01/16] spi: Add zynq qspi controller driver   Jagan Teki
• [U-Boot] [PATCH v4 02/16] dts: zynq: Add zynq qspi controller nodes   Jagan Teki
• [U-Boot] [PATCH v4 03/16] doc: device-tree-bindings: spi: Add zynq qspi info   Jagan Teki
• [U-Boot] [PATCH v4 04/16] dts: microzed: Enable zynq qspi controller node   Jagan Teki
• [U-Boot] [PATCH v4 05/16] dts: zc702: Enable zynq qspi controller node   Jagan Teki
• [U-Boot] [PATCH v4 06/16] dts: zc706: Enable zynq qspi controller node   Jagan Teki
• [U-Boot] [PATCH v4 07/16] dts: zc770-xm010: Enable zynq qspi controller node   Jagan Teki
• [U-Boot] [PATCH v4 08/16] dts: zed: Enable zynq qspi controller node   Jagan Teki
• [U-Boot] [PATCH v4 09/16] configs: Enable legacy SPI flash interface support   Jagan Teki
• [U-Boot] [PATCH v4 10/16] zynq-common: Enable zynq qspi controller support   Jagan Teki
• [U-Boot] [PATCH v4 11/16] zynq-common: Enable Bank/Extended address register support   Jagan Teki
• [U-Boot] [PATCH v4 12/16] configs: zynq: Enable zynq qspi controller   Jagan Teki
• [U-Boot] [PATCH v4 13/16] spi: Kconfig: Add Zynq QSPI controller entry   Jagan Teki
• [U-Boot] [PATCH v4 14/16] spi: zynq_spi: Add config reg shift named macros   Jagan Teki
• [U-Boot] [PATCH v4 15/16] spi: zynq_spi: Rename baudrate divisor mask name   Jagan Teki
• [U-Boot] [PATCH v4 16/16] spi: zynq_spi: Store cs value into private data   Jagan Teki
• [U-Boot] [PATCH v4 00/16] spi: zynq qspi support   Jagan Teki
• [U-Boot] [PATCH v4 07/16] dts: zc770-xm010: Enable zynq qspi controller node   Jagan Teki
• [U-Boot] [PATCH v3 00/13] sf: BAR/wait_ready logic updates   Jagan Teki
• [U-Boot] [PATCH v3 01/13] spi: zynq_spi: Remove unneeded headers   Jagan Teki
• [U-Boot] [PATCH v3 02/13] sf: Return bank_sel, if flash->bank_curr == bank_sel   Jagan Teki
• [U-Boot] [PATCH v3 03/13] sf: Make BAR discovery, as spi_flash_read_bar   Jagan Teki
• [U-Boot] [PATCH v3 04/13] sf: Optimize BAR write code   Jagan Teki
• [U-Boot] [PATCH v3 05/13] sf: Make flash->flags use for generic usage   Jagan Teki
• [U-Boot] [PATCH v3 06/13] sf: Update status reg check in spi_flash_cmd_wait_ready   Jagan Teki
• [U-Boot] [PATCH v3 07/13] sf: Add FSR support to spi_flash_cmd_wait_ready   Jagan Teki
• [U-Boot] [PATCH v3 08/13] sf: Add flash_read_reg support   Jagan Teki
• [U-Boot] [PATCH v3 09/13] sf: Use flash_read_reg routine   Jagan Teki
• [U-Boot] [PATCH v3 10/13] sf: Add flash_read support   Jagan Teki
• [U-Boot] [PATCH v3 11/13] sf: Use flash_read routine in spi_flash_read_ops   Jagan Teki
• [U-Boot] [PATCH v3 12/13] sf: Add clear flag status register support   Jagan Teki
• [U-Boot] [PATCH v3 13/13] sf: Rename read register functions   Jagan Teki
• [U-Boot] [PATCH v3 05/13] sf: Make flash->flags use for generic usage   Jagan Teki
• [U-Boot] [PATCH v4 01/16] spi: Add zynq qspi controller driver   Jagan Teki
• [U-Boot] [PATCH 1/5] spi_sf: Skip the erasing of protected sectors   Jagan Teki
• [U-Boot] [PATCH v4 01/16] spi: Add zynq qspi controller driver   Jagan Teki
• [U-Boot] [PATCH v5 07/16] dts: zc770-xm010: Enable zynq qspi controller node   Jagan Teki
• [U-Boot] [PATCH v5 13/16] spi: Kconfig: Add Zynq QSPI controller entry   Jagan Teki
• [U-Boot] Zynq build failure   Jagan Teki
• [U-Boot] [PATCH 1/1] spi: tegra20: Add support for mode selection   Jagan Teki
• [U-Boot] [PATCH 1/1] spi: tegra20: Add support for mode selection   Jagan Teki
• [U-Boot] [PATCH v4 00/16] spi: zynq qspi support   Jagan Teki
• [U-Boot] [PATCH v5 07/16] dts: zc770-xm010: Enable zynq qspi controller node   Jagan Teki
• [U-Boot] [PATCH v5 13/16] spi: Kconfig: Add Zynq QSPI controller entry   Jagan Teki
• [U-Boot] [PATCH 1/4] sf: params: Add IS25LP032 part support   Jagan Teki
• [U-Boot] [PATCH 2/4] sf: params: Add IS25LP064 part support   Jagan Teki
• [U-Boot] [PATCH 3/4] sf: params: Add IS25LP128 part support   Jagan Teki
• [U-Boot] [PATCH 4/4] zynq-common: Enable ISSI SPI-NOR flash support   Jagan Teki
• [U-Boot] [PATCH v4 1/4] bitops: introduce BIT() definition   Jagan Teki
• [U-Boot] [PATCH v2] spi: tegra20: Add support for mode selection   Jagan Teki
• [U-Boot] [PATCH 1/3] spi: xilinx_spi: Fix to configure CPOL, CPHA mask   Jagan Teki
• [U-Boot] [PATCH 2/3] spi: zynq_spi: Fix to configure CPOL, CPHA mask   Jagan Teki
• [U-Boot] [PATCH 3/3] spi: zynq_qspi: Fix to configure CPOL, CPHA mask   Jagan Teki
• [U-Boot] [PATCH 1/4] sf: params: Add IS25LP032 part support   Jagan Teki
• [U-Boot] [PATCH v3] spi: tegra20: Add support for mode selection   Jagan Teki
• [U-Boot] Zynq build failure   Jagan Teki
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Jagan Teki
• [U-Boot] [PATCH 1/4] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Jagan Teki
• [U-Boot] [PATCH 3/4] spi: cadence_qspi: Ensure check for max frequency in place   Jagan Teki
• [U-Boot] [PATCH 4/4] arm: dts: socfpga: Increase the spi-max-frequency for QSPI flash   Jagan Teki
• [U-Boot] [PATCH 1/4] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Jagan Teki
• [U-Boot] Zynq build failure   Jagan Teki
• [U-Boot] [PATCH v4 1/4] bitops: introduce BIT() definition   Jagan Teki
• [U-Boot] Zynq build failure   Jagan Teki
• [U-Boot] Zynq build failure   Jagan Teki
• [U-Boot] [PATCH] zynq-common: Define spi args offset and size   Jagan Teki
• [U-Boot] [PATCH 1/4] sf: params: Add IS25LP032 part support   Jagan Teki
• [U-Boot] [PATCH v2] zynq-common: Define spi args offset and size   Jagan Teki
• [U-Boot] [PATCH v2] zynq-common: Define spi args offset and size   Jagan Teki
• [U-Boot] Pull-request: u-boot-spi/master   Jagan Teki
• [U-Boot] Pull-request: u-boot-spi/master   Jagan Teki
• [U-Boot] ZYNQ, ZC702 getting started   Jagan Teki
• [U-Boot] ZYNQ, ZC702 getting started   Jagan Teki
• [U-Boot] ZYNQ, ZC702 getting started   Jagan Teki
• [U-Boot] [PATCH] spi : convert altera_spi to driver model   Jagan Teki
• [U-Boot] SPI pending patches   Jagan Teki
• [U-Boot] Pull-request: u-boot-spi/master   Jagan Teki
• [U-Boot] SPI pending patches   Jagan Teki
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Jagan Teki
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Jagan Teki
• [U-Boot] [PATCH v6 1/5] spi: cadence_qspi: move trigger base configuration in init   Jagan Teki
• [U-Boot] [PATCH v6 2/5] spi: cadence_qspi: fix indirect read/write start address   Jagan Teki
• [U-Boot] [PATCH v6 3/5] spi: cadence_qspi: fix base trigger address & transfer start address   Jagan Teki
• [U-Boot] [PATCH v6 4/5] spi: cadence_qspi: rename ahbbase to flashbase for clarity   Jagan Teki
• [U-Boot] [PATCH v6 2/5] spi: cadence_qspi: fix indirect read/write start address   Jagan Teki
• [U-Boot] [PATCH v6 5/5] spi: cadence_qspi: get fifo width from device tree   Jagan Teki
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Jagan Teki
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Jagan Teki
• [U-Boot] [PATCH v6 2/5] spi: cadence_qspi: fix indirect read/write start address   Jagan Teki
• [U-Boot] [PATCH v7 1/6] spi: cadence_qspi: move trigger base configuration in init   Jagan Teki
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Jagan Teki
• [U-Boot] [PATCH v2 5/5] cgtqmx6eval: Protect the manufacturing information in SPI NOR   Jagan Teki
• [U-Boot] [PATCH] spi : convert altera_spi to driver model   Jagan Teki
• [U-Boot] [PATCH] spi: ignore set speed and mode if not available   Jagan Teki
• [U-Boot] [PATCH v3 07/13] sf: Add FSR support to spi_flash_cmd_wait_ready   Jagan Teki
• [U-Boot] [PATCH v2 2/2] spi: Add SPI NOR protection mechanism   Jagan Teki
• [U-Boot] [PATCH v2 2/2] spi: Add SPI NOR protection mechanism   Jagan Teki
• [U-Boot] Pull-request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH 1/3] dm: dts: ls1021a-twr: Enable DSPI2 on LS1021ATWR   Jagan Teki
• [U-Boot] [PATCH 2/3] mtd: sf: Add support AT26DF081A chip   Jagan Teki
• [U-Boot] [PATCH 3/3] configs: ls1021atwr: Enable DSPI for LS1021ATWR   Jagan Teki
• [U-Boot] [PATCH v3 2/2] spi: Add SPI NOR protection mechanism   Jagan Teki
• [U-Boot] [PATCH v4 5/8] arm: serial: Add ability to use pre-initialized UARTs   Sergei Temerkhanov
• [U-Boot] [PATCH v5 5/9] arm: serial: Add ability to use pre-initialized UARTs   Sergei Temerkhanov
• [U-Boot] [U-Boot, v5, 2/9] armv8: New MMU setup code allowing to use 48+ bits PA/VA   Sergei Temerkhanov
• [U-Boot] [PATCH v6 7/9] armv8: cavium: Add ThunderX 88xx board definition   Sergei Temerkhanov
• [U-Boot] [PATCH v6 8/9] armv8: cavium: Add an implementation of ATF calling functions   Sergei Temerkhanov
• [U-Boot] [PATCH v5 0/9] Add support for ThunderX 88xx SoC family   Sergey Temerkhanov
• [U-Boot] [PATCH v5 1/9] armv8: Add read_mpidr() function   Sergey Temerkhanov
• [U-Boot] [PATCH v5 2/9] armv8: New MMU setup code allowing to use 48+ bits PA/VA   Sergey Temerkhanov
• [U-Boot] [PATCH v5 3/9] armv8: Add Secure Monitor/Hypervisor Call (SMC/HVC) infrastructure   Sergey Temerkhanov
• [U-Boot] [PATCH v5 4/9] armv8: Add psci.h from the Linux kernel   Sergey Temerkhanov
• [U-Boot] [PATCH v5 5/9] arm: serial: Add ability to use pre-initialized UARTs   Sergey Temerkhanov
• [U-Boot] [PATCH v5 6/9] armv8: cavium: Add the device tree for ThunderX   Sergey Temerkhanov
• [U-Boot] [PATCH v5 7/9] armv8: cavium: Add ThunderX 88xx board definition   Sergey Temerkhanov
• [U-Boot] [PATCH v5 8/9] armv8: cavium: Add an implementation of ATF calling functions   Sergey Temerkhanov
• [U-Boot] [PATCH v5 9/9] armv8: cavium: Get DRAM size from ATF   Sergey Temerkhanov
• [U-Boot] [PATCH] arm: serial: Add debug UART capability to the pl01x driver   Sergey Temerkhanov
• [U-Boot] [PATCH v2 0/2] This series adds an ability to use pl01x for early debug output.   Sergey Temerkhanov
• [U-Boot] [PATCH v2 1/2] arm: serial: Add debug UART capability to the pl01x driver   Sergey Temerkhanov
• [U-Boot] [PATCH v2 2/2] arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output   Sergey Temerkhanov
• [U-Boot] [PATCH v6 0/9] Add support for ThunderX 88xx SoC family   Sergey Temerkhanov
• [U-Boot] [PATCH v6 1/9] armv8: Add read_mpidr() function   Sergey Temerkhanov
• [U-Boot] [PATCH v6 2/9] armv8: New MMU setup code allowing to use 48+ bits PA/VA   Sergey Temerkhanov
• [U-Boot] [PATCH v6 3/9] armv8: Add Secure Monitor/Hypervisor Call (SMC/HVC) infrastructure   Sergey Temerkhanov
• [U-Boot] [PATCH v6 4/9] armv8: Add psci.h from the Linux kernel   Sergey Temerkhanov
• [U-Boot] [PATCH v6 5/9] arm: serial: Add ability to use pre-initialized UARTs   Sergey Temerkhanov
• [U-Boot] [PATCH v6 6/9] armv8: cavium: Add the device tree for ThunderX   Sergey Temerkhanov
• [U-Boot] [PATCH v6 7/9] armv8: cavium: Add ThunderX 88xx board definition   Sergey Temerkhanov
• [U-Boot] [PATCH v6 8/9] armv8: cavium: Add an implementation of ATF calling functions   Sergey Temerkhanov
• [U-Boot] [PATCH v6 9/9] armv8: cavium: Get DRAM size from ATF   Sergey Temerkhanov
• [U-Boot] [PATCH 1/3] imx-common: fix iomux settings   Benoît Thébaudeau
• [U-Boot] [PATCH 1/3] imx-common: fix iomux settings   Benoît Thébaudeau
• [U-Boot] [PATCH 1/3] imx-common: fix iomux settings   Benoît Thébaudeau
• [U-Boot] [PATCH] imx-common: consider mux_ctrl_ofs when setting mux_mode   Benoît Thébaudeau
• [U-Boot] [PATCH V2] imx-common: consider mux_ctrl_ofs when setting mux_mode   Benoît Thébaudeau
• [U-Boot] [PATCH 1/5] fs/fat/fat_write: Fix buffer alignments   Benoît Thébaudeau
• [U-Boot] [PATCH 2/5] fs/fat/fat_write: Merge calls to set_cluster()   Benoît Thébaudeau
• [U-Boot] [PATCH 3/5] fs/fat/fat_write: Fix curclust/newclust mix-up   Benoît Thébaudeau
• [U-Boot] [PATCH 4/5] fs/fat/fat_write: Factor out duplicate code   Benoît Thébaudeau
• [U-Boot] [PATCH 5/5] fs/fat/fat_write: Fix management of empty files   Benoît Thébaudeau
• [U-Boot] [PATCH] Fix FSL DDR clock adjust calculation.   Joakim Tjernlund
• [U-Boot] [PATCH] Fix FSL DDR clock adjust calculation.   Joakim Tjernlund
• [U-Boot] [PATCH] Fix FSL DDR clock adjust calculation.   Joakim Tjernlund
• [U-Boot] [PATCH] Fix FSL DDR clock adjust calculation.   Joakim Tjernlund
• [U-Boot] FSL DDR3/4 wrlvl_override question   Joakim Tjernlund
• [U-Boot] FSL DDR3/4 wrlvl_override question   Joakim Tjernlund
• [U-Boot] [PATCH v2 2/4] ubifs: Add functions for generic fs use   Michael Trimarchi
• [U-Boot] [PATCH] sunxi: Add generic defconfigs for A33 Q8 tablets with 1024x600 / 800x480 LCD   Chen-Yu Tsai
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
• [U-Boot] [PATCH] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Marek Vasut
• [U-Boot] arm: socfpga: Question about FPGA/HPS SDRAM Bridge   Marek Vasut
• [U-Boot] [PATCH] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Marek Vasut
• [U-Boot] [PATCH] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Marek Vasut
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb: zynqmp: Add XHCI driver support   Marek Vasut
• [U-Boot] [PATCH v2 2/2] usb: zynqmp: Enable USB XHCI support   Marek Vasut
• [U-Boot] arm: socfpga: Question about FPGA/HPS SDRAM Bridge   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb: zynqmp: Add XHCI driver support   Marek Vasut
• [U-Boot] [PATCH v2 1/2] usb: zynqmp: Add XHCI driver support   Marek Vasut
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Marek Vasut
• [U-Boot] [PATCH v3 07/13] sf: Add FSR support to spi_flash_cmd_wait_ready   Marek Vasut
• [U-Boot] [PATCH] mxs: mxsboot: fix endianess for sd boot images   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Marek Vasut
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Add support for Terasic SoCkit board   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Add support for DENX MCV SoM and MCVEVK board   Marek Vasut
• [U-Boot] [PATCHv2] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Marek Vasut
• [U-Boot] arm: socfpga: Question about FPGA/HPS SDRAM Bridge   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
• [U-Boot] arm: socfpga: Question about FPGA/HPS SDRAM Bridge   Marek Vasut
• [U-Boot] [PATCHv2] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Marek Vasut
• [U-Boot] [PATCH v2] arm: socfpga: Fix memory error caused by re-enabling OCRAM ECC   Marek Vasut
• [U-Boot] [PATCHv2] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Marek Vasut
• [U-Boot] [PATCHv2] arm: socfpga: Add support for the Terasic DE-0 Atlas board   Marek Vasut
• [U-Boot] [PATCH v3 1/2] usb: zynqmp: Add XHCI driver support   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
• [U-Boot] [PATCH v3 1/2] usb: zynqmp: Add XHCI driver support   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
• [U-Boot] [PATCH 2/7] arm: mvebu: Do not call board_init_r() from board_init_f()   Marek Vasut
• [U-Boot] [PATCH 5/7] usb: ehci-marvell.c: Add DM support   Marek Vasut
• [U-Boot] [PATCH 1/4] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Marek Vasut
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Marek Vasut
• [U-Boot] [PATCH 4/4] arm: dts: socfpga: Increase the spi-max-frequency for QSPI flash   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
• [U-Boot] [PATCH 5/7] usb: ehci-marvell.c: Add DM support   Marek Vasut
• [U-Boot] [PATCH 5/7] usb: ehci-marvell.c: Add DM support   Marek Vasut
• [U-Boot] [RFC] Adding support for NI Ettus Research USRP E3XX series   Marek Vasut
• [U-Boot] [RFC] Adding support for NI Ettus Research USRP E3XX series   Marek Vasut
• [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Marek Vasut
• [U-Boot] [PATCH] net: altera_tse: Zap unused variable   Marek Vasut
• [U-Boot] [PATCH 1/2] nios2: Switch to generic timer   Marek Vasut
• [U-Boot] [PATCH 2/2] nios2: Split timer code into timer.c   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Do not call board_init_r() from board_init_f()   Marek Vasut
• [U-Boot] [PATCH v2 1/8] nios2: permit device tree control of U-Boot   Marek Vasut
• [U-Boot] [PATCH v2 2/8] nios2: move altera_pio_init to board_early_init_r   Marek Vasut
• [U-Boot] [PATCH v2 3/8] nios2: BSS should be cleared only after board_init_f   Marek Vasut
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Marek Vasut
• [U-Boot] [PATCH v2 5/8] nios2: remove gp assignments in link script   Marek Vasut
• [U-Boot] [PATCH v2 6/8] nios2: define _end in link script   Marek Vasut
• [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command   Marek Vasut
• [U-Boot] [PATCH v2 8/8] nios2: enable device tree control of U-Boot   Marek Vasut
• [U-Boot] [PATCH v2 0/8] nios2: add device tree control of U-Boot   Marek Vasut
• [U-Boot] [PATCH 1/2] nios2: Switch to generic timer   Marek Vasut
• [U-Boot] [PATCH] net: altera_tse: Zap unused variable   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
• [U-Boot] [PATCH v2 2/8] nios2: move altera_pio_init to board_early_init_r   Marek Vasut
• [U-Boot] [PATCH v3 6/8] nios2: define _end in link script   Marek Vasut
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Marek Vasut
• [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command   Marek Vasut
• [U-Boot] [PATCH v2 8/8] nios2: enable device tree control of U-Boot   Marek Vasut
• [U-Boot] [PATCH v2 0/8] nios2: add device tree control of U-Boot   Marek Vasut
• [U-Boot] [PATCH] nios2: configure STATUS_LED_BOOT   Marek Vasut
• [U-Boot] [PATCH v4 1/2] usb: zynqmp: Add XHCI driver support   Marek Vasut
• [U-Boot] [PATCH v4 1/2] usb: zynqmp: Add XHCI driver support   Marek Vasut
• [U-Boot] [PATCH] nios2: configure STATUS_LED_BOOT   Marek Vasut
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Marek Vasut
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Marek Vasut
• [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command   Marek Vasut
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Marek Vasut
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Marek Vasut
• [U-Boot] [PATCH 1/2] mx6: remove SYS_SOC from board Kconfig   Marek Vasut
• [U-Boot] [PATCH v4 0/7] nios2: add device tree control of U-Boot   Marek Vasut
• [U-Boot] [PATCH v2 4/8] nios2: enlarge the code relocation range   Marek Vasut
• [U-Boot] [PATCH 1/2] nios2: Switch to generic timer   Marek Vasut
• [U-Boot] [PATCH] nios2: enable Driver Model   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH v4 1/4] bitops: introduce BIT() definition   Marek Vasut
• [U-Boot] [PATCH V2 1/2] nios2: Switch to generic timer   Marek Vasut
• [U-Boot] [PATCH 2/2] nios2: Split timer code into timer.c   Marek Vasut
• [U-Boot] [PATCH 1/2] nios2: Switch to generic timer   Marek Vasut
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Marek Vasut
• [U-Boot] [PATCH v2 7/8] nios2: show fdt blob address in board info command   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
• [U-Boot] [PATCH 1/4] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Marek Vasut
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Marek Vasut
• [U-Boot] [PATCH 4/4] arm: dts: socfpga: Increase the spi-max-frequency for QSPI flash   Marek Vasut
• [U-Boot] [PATCH 1/4] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: mcvevk: Update DRAM clock to 400MHz   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: mcvevk: Update DRAM clock to 400MHz   Marek Vasut
• [U-Boot] [PATCH 4/5] dm: usb: Add support for USB keyboards with driver model   Marek Vasut
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Marek Vasut
• [U-Boot] [PATCH 1/2] nios2: call board_init_f_mem   Marek Vasut
• [U-Boot] [PATCH 2/2] nios2: enable malloc() pool before relocation   Marek Vasut
• [U-Boot] [PATCH] nios2: zap version_string   Marek Vasut
• [U-Boot] [PATCH] nios2: zap dly_clks   Marek Vasut
• [U-Boot] [PATCH 01/28] dm: input: Create a keyboard uclass   Marek Vasut
• [U-Boot] Fastboot is not detected   Marek Vasut
• [U-Boot] [PATCH V2] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Marek Vasut
• [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Marek Vasut
• [U-Boot] [PATCH 4/5] dm: usb: Add support for USB keyboards with driver model   Marek Vasut
• [U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Marek Vasut
• [U-Boot] [PATCH v3 5/5] common: Enable fdt_support in SPL build   Marek Vasut
• [U-Boot] [PATCH v3 2/5] spi: cadence_qspi: Fix fdt read of spi-max-frequency   Marek Vasut
• [U-Boot] [PATCH v3 1/5] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Marek Vasut
• [U-Boot] [PATCH v2] pcie_imx: Use 'ms' for milliseconds   Marek Vasut
• [U-Boot] [PATCH v3 5/5] common: Enable fdt_support in SPL build   Marek Vasut
• [U-Boot] [PATCH 2/4] mmc: dw_mmc: Zap endless timeout   Marek Vasut
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Marek Vasut
• [U-Boot] [PATCH 2/4] mmc: dw_mmc: Zap endless timeout   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] usb: ci_udc: fix emissions of ZLPs   Marek Vasut
• [U-Boot] [PATCH 1/2] nios2: remap and translate reg address in device tree   Marek Vasut
• [U-Boot] [PATCH 2/2] nios2: convert altera_jtag_uart to driver model   Marek Vasut
• [U-Boot] [PATCH v2 1/3] nios2: map physical address to uncached virtual address   Marek Vasut
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Marek Vasut
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Enable saveenv for SD/MMC   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Enable saveenv for SD/MMC   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Fix cache configuration   Marek Vasut
• [U-Boot] [PATCH] nios2: convert altera_uart to driver model   Marek Vasut
• [U-Boot] [PATCH v2] nios2: convert altera_uart to driver model   Marek Vasut
• [U-Boot] [PATCH v5] nios2: convert altera_jtag_uart to driver model   Marek Vasut
• [U-Boot] [PATCH v5] nios2: convert altera_jtag_uart to driver model   Marek Vasut
• [U-Boot] [PATCH v5] nios2: convert altera_jtag_uart to driver model   Marek Vasut
• [U-Boot] [PATCH] spi : convert altera_spi to driver model   Marek Vasut
• [U-Boot] [PATCH] spi : convert altera_spi to driver model   Marek Vasut
• [U-Boot] [PATCH] spi: ignore set speed and mode if not available   Marek Vasut
• [U-Boot] [PATCH] spi : convert altera_spi to driver model   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH 3/3] arm: socfpga: Enable saveenv for SD/MMC   Marek Vasut
• [U-Boot] Regression in usb-storage in u-boot 2015.04 ???   Marek Vasut
• [U-Boot] [PATCH v6 2/5] spi: cadence_qspi: fix indirect read/write start address   Marek Vasut
• [U-Boot] [PATCH v6 2/5] spi: cadence_qspi: fix indirect read/write start address   Marek Vasut
• [U-Boot] [PATCH 3/3] arm: socfpga: Enable saveenv for SD/MMC   Marek Vasut
• [U-Boot] [PATCHv3] arm: socfpga: Enable saveenv for SD/MMC   Marek Vasut
• [U-Boot] [PATCH] nios2: add clear and set bits macros   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Enable env support on MCV   Marek Vasut
• [U-Boot] [PATCHv4] arm: socfpga: Enable saveenv for SD/MMC   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Enable env support on MCV   Marek Vasut
• [U-Boot] [PATCH v3 1/5] spi: cadence_qspi: Ensure spi_calibration is run when sclk change   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCHv3] arm: socfpga: Enable saveenv for SD/MMC   Marek Vasut
• [U-Boot] [PATCH] nios2 : convert altera_pio to driver model   Marek Vasut
• [U-Boot] [PATCH] common: add CMD_GPIO to Kconfig   Marek Vasut
• [U-Boot] [PATCH] common: add CMD_GPIO to Kconfig   Marek Vasut
• [U-Boot] [PATCH v2] nios2: convert nios2 cpu to driver model   Marek Vasut
• [U-Boot] Relocation issue - need help!   Marek Vasut
• [U-Boot] [Patch v2 07/16] net/fm: fix MDIO controller base on FMAN2   Hu Vincent
• [U-Boot] [Patch v2 09/16] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC   Hu Vincent
• [U-Boot] [Patch v2 09/16] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC   Hu Vincent
• [U-Boot] [PATCH 3/3] dra72_evm: Switch to DM_SERIAL   Lokesh Vutla
• [U-Boot] [PATCH] dm: keystone: serial: Add driver model support   Lokesh Vutla
• [U-Boot] [PATCH 0/8] ARM: keystone2: Enable OF_CONTROL and DM   Lokesh Vutla
• [U-Boot] [PATCH 1/8] ARM: keystone2: Fix serial port init   Lokesh Vutla
• [U-Boot] [PATCH 2/8] ARM: keystone2: spl: Fix stack allocation with CONFIG_SYS_MALLOC_F_LEN   Lokesh Vutla
• [U-Boot] [PATCH 3/8] ARM: dts: Keystone2: Import generic dt files from Linux Kernel   Lokesh Vutla
• [U-Boot] [PATCH 4/8] ARM: dts: keystone2: Do not use LPAE addresses in U-Boot   Lokesh Vutla
• [U-Boot] [PATCH 5/8] ARM: dts: k2hk: Enable OF_CONTROL and DM   Lokesh Vutla
• [U-Boot] [PATCH 6/8] ARM: dts: k2l: Enable OF_CONTROL and DM   Lokesh Vutla
• [U-Boot] [PATCH 7/8] ARM: dts: k2e: Enable OF_CONTROL and DM   Lokesh Vutla
• [U-Boot] [PATCH 8/8] ARM: keystone2: Use dtb images by default   Lokesh Vutla
• [U-Boot] [PATCH 00/19] ARM: k2g: Add support for 66AK2G02   Lokesh Vutla
• [U-Boot] [PATCH 01/19] ARM: k2g: Add support for CPU detection   Lokesh Vutla
• [U-Boot] [PATCH 02/19] ARM: k2g: Add kconfig support   Lokesh Vutla
• [U-Boot] [PATCH 03/19] ARM: k2g: Add pll data   Lokesh Vutla
• [U-Boot] [PATCH 04/19] ARM: k2g: Add clock information   Lokesh Vutla
• [U-Boot] [PATCH 05/19] ARM: k2g: Add PSC info   Lokesh Vutla
• [U-Boot] [PATCH 06/19] ARM: k2g: Add ddr3 info   Lokesh Vutla
• [U-Boot] [PATCH 07/19] ARM: k2g: Add support for pin mux configuration   Lokesh Vutla
• [U-Boot] [PATCH 08/19] ARM: k2g: Add pin mux data   Lokesh Vutla
• [U-Boot] [PATCH 09/19] ARM: k2g: Correct base addresses   Lokesh Vutla
• [U-Boot] [PATCH 10/19] ARM: k2g: update keystone nav rx queue numbers   Lokesh Vutla
• [U-Boot] [PATCH 11/19] driver: net: keystone_net: fix phy mode configuration   Lokesh Vutla
• [U-Boot] [PATCH 12/19] dma: keystone_nav: Fix linkram size   Lokesh Vutla
• [U-Boot] [PATCH 13/19] driver: net: keystone_net: add support for rgmii phy   Lokesh Vutla
• [U-Boot] [PATCH 14/19] driver: net: keystone_net: removing unused code   Lokesh Vutla
• [U-Boot] [PATCH 15/19] ARM: k2g: Add Ethernet Support   Lokesh Vutla
• [U-Boot] [PATCH 16/19] ARM: k2g: add SD card and eMMC support   Lokesh Vutla
• [U-Boot] [PATCH 17/19] ARM: k2g: Enable SPI flash   Lokesh Vutla
• [U-Boot] [PATCH 18/19] ARM: dts: k2g: Add DT support   Lokesh Vutla
• [U-Boot] [PATCH 19/19] ARM: k2g: Add config file   Lokesh Vutla
• [U-Boot] [PATCH 1/6] drivers: serial: serial_omap: populate default clock frequency when not found in dt   Lokesh Vutla
• [U-Boot] [PATCH 2/6] drivers: serial: serial_omap: add comaptibles for all ti platforms   Lokesh Vutla
• [U-Boot] [PATCH 3/6] am43xx_evm.h: : switch to CONFIG_OMAP_SERIAL for non-SPL DM_SERIAL   Lokesh Vutla
• [U-Boot] [PATCH 5/6] am437x: Add am437x_gp_evm_defconfig using CONFIG_DM   Lokesh Vutla
• [U-Boot] [PATCH 6/6] am437x: Add am437x_sk_evm_defconfig using CONFIG_DM   Lokesh Vutla
• [U-Boot] [PATCH v5 2/3] pinctrl: add pin control uclass support   Linus Walleij
• [U-Boot] [PATCH 00/11] vexpress64 FVP and Juno configuration updates   Linus Walleij
• [U-Boot] [PATCH v5 0/3] add pinctrl driver framework   Linus Walleij
• [U-Boot] [PATCH] armv8/fsl-lsch3: fdt: Check the pointer returned from call to a function may be NULL   Alison Wang
• [U-Boot] [PATCH] arm: mmu: Add missing volatile for reading SCTLR register   Alison Wang
• [U-Boot] [PATCH] arm: ls1021a: Add QSPI or IFC support in SD boot   Alison Wang
• [U-Boot] [PATCH] arm/ls102xa: Add STANDBY implement based on PSCI   Dongsheng Wang
• [U-Boot] arm: ls1021a: Ensure Generic Timer disabled before jumping into the OS   Huan Wang
• [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Stephen Warren
• [U-Boot] [PATCH v2 2/4] ubifs: Add functions for generic fs use   Stephen Warren
• [U-Boot] [PATCH v2 3/4] ubifs: Add generic fs support   Stephen Warren
• [U-Boot] [PATCH v2 4/4] distro_bootcmd: Add support for booting from ubifs   Stephen Warren
• [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Stephen Warren
• [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Stephen Warren
• [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Stephen Warren
• [U-Boot] [PATCH 01/10] usb: gadget: don't leak configs when unbinding   Stephen Warren
• [U-Boot] [PATCH 02/10] ext4: avoid calling ext4fs_mount() twice, which leaks   Stephen Warren
• [U-Boot] [PATCH 03/10] ext4: free allocations by parse_path()   Stephen Warren
• [U-Boot] [PATCH 04/10] ext4: fix leak in check_filename()   Stephen Warren
• [U-Boot] [PATCH 05/10] dfu: don't keep freeing/reallocating   Stephen Warren
• [U-Boot] [PATCH 06/10] dfu: mmc: buffer file reads too   Stephen Warren
• [U-Boot] [PATCH 07/10] ARM: tegra: fix malloc region sizing   Stephen Warren
• [U-Boot] [PATCH 08/10] ARM: tegra: tweak DFU buffer sizes   Stephen Warren
• [U-Boot] [PATCH 09/10] ARM: tegra: enable filesystem writing   Stephen Warren
• [U-Boot] [PATCH 10/10] ARM: tegra: enable DFU for RAM   Stephen Warren
• [U-Boot] [PATCH 07/10] ARM: tegra: fix malloc region sizing   Stephen Warren
• [U-Boot] [PATCH 01/10] usb: gadget: don't leak configs when unbinding   Stephen Warren
• [U-Boot] [PATCH 07/10] ARM: tegra: fix malloc region sizing   Stephen Warren
• [U-Boot] [PATCH 07/10] ARM: tegra: fix malloc region sizing   Stephen Warren
• [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Stephen Warren
• [U-Boot] [PATCH 1/2] ARM: tegra124: Clear IDDQ when enabling PLLC   Stephen Warren
• [U-Boot] [PATCH] fat: handle paths that include ../   Stephen Warren
• [U-Boot] [PATCH] fat: handle paths that include ../   Stephen Warren
• [U-Boot] [PATCH] dm: core: Enable optional use of fdt_translate_address()   Stephen Warren
• [U-Boot] [PATCH] usb: ci_udc: fix emissions of ZLPs   Stephen Warren
• [U-Boot] [PATCH 4/4] dfu: add SF backend   Stephen Warren
• [U-Boot] [PATCH] dm: core: Enable optional use of fdt_translate_address()   Stephen Warren
• [U-Boot] [PATCH v2 3/4] ubifs: Add generic fs support   Stephen Warren
• [U-Boot] [PATCH v2 1/5] disk/part: Only build hostfs special handling when CONFIG_SANDBOX is set   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: p2371-2180: import latest pinmux   Stephen Warren
• [U-Boot] [PATCH 4/4] dfu: add SF backend   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: expand all SPL sizes to be consistent   Stephen Warren
• [U-Boot] [PATCH] FIX: fat: Provide correct return code from disk_{read|write} to upper layers   Stephen Warren
• [U-Boot] [PATCH] dfu: dfu_sf: Take the start address into account   Stephen Warren
• [U-Boot] [PATCH] dfu: dfu_sf: Take the start address into account   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: expand all SPL sizes to be consistent   Stephen Warren
• [U-Boot] [PATCH 1/2] ARM: tegra: fix GPIO init table programming   Stephen Warren
• [U-Boot] [PATCH 2/2] ARM: tegra: don't enable GPIOs until direction is set   Stephen Warren
• [U-Boot] [PATCH V2] ARM: tegra: expand all SPL sizes to be consistent   Stephen Warren
• [U-Boot] How do I tell buildman to use a /specific/ toolchain?   Stephen Warren
• [U-Boot] [PATCH 1/3] fix: fdtdec: allow parse 'reg' property with zero value in '#size-cells'   Stephen Warren
• [U-Boot] [PATCH 2/3] fix: s5p_gpio: call: dev_get_addr() instead of fdtdec_get_addr()   Stephen Warren
• [U-Boot] [PATCH 08/18] sandbox: Use the reset driver to handle reset   Stephen Warren
• [U-Boot] [PATCH 08/18] sandbox: Use the reset driver to handle reset   Stephen Warren
• [U-Boot] [PATCH] FIX: fat: Provide correct return code from disk_{read|write} to upper layers   Stephen Warren
• [U-Boot] [PATCH 1/3] fix: fdtdec: allow parse 'reg' property with zero value in '#size-cells'   Stephen Warren
• [U-Boot] [PATCH 2/3] fix: s5p_gpio: call: dev_get_addr() instead of fdtdec_get_addr()   Stephen Warren
• [U-Boot] [PATCH] fdt: fix fdtdec_get_addr_size not to require any size cells   Stephen Warren
• [U-Boot] [PATCH 1/2] gpio: tegra: remove unused type   Stephen Warren
• [U-Boot] [PATCH 2/2] gpio: tegra: use named constants   Stephen Warren
• [U-Boot] [PATCH v3] dm: core: Enable optional use of fdt_translate_address()   Stephen Warren
• [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Tom Warren
• [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Tom Warren
• [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Tom Warren
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Tom Warren
• [U-Boot] [PATCH 2/2] ARM: tegra114: Clear IDDQ when enabling PLLC   Tom Warren
• [U-Boot] [PATCH 07/10] ARM: tegra: fix malloc region sizing   Tom Warren
• [U-Boot] [PATCH 07/10] ARM: tegra: fix malloc region sizing   Tom Warren
• [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Tom Warren
• [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Tom Warren
• [U-Boot] [PATCH] Add support for LZ4 decompression algorithm   Julius Werner
• [U-Boot] CONFIG_ENV_IS_IN_UBI not working nicely with CONFIG_SPI_FLASH_MTD   Edward Wingate
• [U-Boot] ls2085ardb not booting   Scott Wood
• [U-Boot] [PATCH 1/2] arm/fsl-ls: Add CONFIG_OF_STDOUT_VIA_ALIAS   Scott Wood
• [U-Boot] [PATCH 2/2] fdt_support: Don't panic if unable to perform stdout fixup   Scott Wood
• [U-Boot] [PATCH 2/2] fdt_support: Don't panic if unable to perform stdout fixup   Scott Wood
• [U-Boot] [PATCH 2/2] fdt_support: Don't panic if unable to perform stdout fixup   Scott Wood
• [U-Boot] [PATCH 2/2] fdt_support: Don't panic if unable to perform stdout fixup   Scott Wood
• [U-Boot] [PATCH 2/2] fdt_support: Don't panic if unable to perform stdout fixup   Scott Wood
• [U-Boot] [PATCH 2/2] fdt_support: Don't panic if unable to perform stdout fixup   Scott Wood
• [U-Boot] [PATCH v2 2/2] fdt_support: Don't panic if stdout alias is missing   Scott Wood
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Scott Wood
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Scott Wood
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Scott Wood
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   Scott Wood
• [U-Boot] [PATCH 1/4 v2] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Scott Wood
• [U-Boot] [PATCH 1/4 v3] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Scott Wood
• [U-Boot] [U-Boot, 1/4, v2] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Scott Wood
• [U-Boot] [U-Boot, 1/4, v2] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600   Scott Wood
• [U-Boot] [PATCH] mtd: nand: fsmc: Fixes and cleanup for fsmc_nand_switch_ecc()   Scott Wood
• [U-Boot] [PATCH 09/14] armv8/ls1043ardb: Add nand boot support   Scott Wood
• [U-Boot] [PATCH 09/14] armv8/ls1043ardb: Add nand boot support   Scott Wood
• [U-Boot] [Patch v2 07/16] net/fm: fix MDIO controller base on FMAN2   Scott Wood
• [U-Boot] [Patch v2 05/16] net: Move some header files to include/   Scott Wood
• [U-Boot] [Patch v2 08/16] net/fm: fix compile warnings for 64-bit platform   Scott Wood
• [U-Boot] [PATCH 09/14] armv8/ls1043ardb: Add nand boot support   Scott Wood
• [U-Boot] [Patch v2 11/16] armv8/ls1043ardb: Add nand boot support   Scott Wood
• [U-Boot] [Patch v2 07/16] net/fm: fix MDIO controller base on FMAN2   Scott Wood
• [U-Boot] [Patch v2 11/16] armv8/ls1043ardb: Add nand boot support   Scott Wood
• [U-Boot] [PATCH 09/14] armv8/ls1043ardb: Add nand boot support   Scott Wood
• [U-Boot] [Patch v2 02/16] common/board_f.c: modify the macro to use get_clocks() more common   Scott Wood
• [U-Boot] [Patch v2 02/16] common/board_f.c: modify the macro to use get_clocks() more common   Scott Wood
• [U-Boot] [Patch v2 08/16] net/fm: fix compile warnings for 64-bit platform   Scott Wood
• [U-Boot] [PATCH] net: change the env name to use const   Josh Wu
• [U-Boot] [PATCH] ARM: atmel: boards: use default CONFIG_SYS_PBSIZE   Josh Wu
• [U-Boot] [PATCH] tools: gen_eth_addr: remove getpid() operation for the random seed   Josh Wu
• [U-Boot] [PATCH] ARM: at91: sama5: add support for CONFIG_ENV_IS_IN_MMC   Josh Wu
• [U-Boot] [PATCH] tools: gen_eth_addr: remove getpid() operation for the random seed   Josh Wu
• [U-Boot] [PATCH] tools: gen_eth_addr: remove getpid() operation for the random seed   Josh Wu
• [U-Boot] [PATCH] tools: gen_eth_addr: remove getpid() operation for the random seed   Josh Wu
• [U-Boot] [PATCH] tools: gen_eth_addr: remove getpid() operation for the random seed   Josh Wu
• [U-Boot] [PATCH v2] tools: gen_eth_addr: add getpid() to time(0) to avoid duplicated seed   Josh Wu
• [U-Boot] [Patch v2 07/16] net/fm: fix MDIO controller base on FMAN2   Shaohui Xie
• [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: enable dat[4:7] for eMMC4.5   Lu Y.B.
• [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: enable dat[4:7] for eMMC4.5   Lu Y.B.
• [U-Boot] [PATCH 00/19] Janitorial: powerpc: remove PowerPC non-generic boards   Masahiro Yamada
• [U-Boot] [PATCH 01/19] powerpc: ppc4xx: remove alpr support   Masahiro Yamada
• [U-Boot] [PATCH 02/19] powerpc: ppc4xx: remove csb272, csb472 support   Masahiro Yamada
• [U-Boot] [PATCH 03/19] powerpc: ppc4xx: remove lwmon5 support   Masahiro Yamada
• [U-Boot] [PATCH 04/19] powerpc: ppc4xx: remove p3p440 support   Masahiro Yamada
• [U-Boot] [PATCH 05/19] powerpc: ppc4xx: remove pcs440ep support   Masahiro Yamada
• [U-Boot] [PATCH 06/19] powerpc: ppc4xx: remove sbc405 support   Masahiro Yamada
• [U-Boot] [PATCH 07/19] powerpc: ppc4xx: remove zeus support   Masahiro Yamada
• [U-Boot] [PATCH 08/19] powerpc: mpc5xx: remove cmi_mpc5xx support   Masahiro Yamada
• [U-Boot] [PATCH 09/19] powerpc: mpc85xx: remove stxgp3, stxssa support   Masahiro Yamada
• [U-Boot] [PATCH 10/19] powerpc: mpc85xx: remove MPC8540ADS support   Masahiro Yamada
• [U-Boot] [PATCH 11/19] powerpc: mpc85xx: remove MPC8541CDS support   Masahiro Yamada
• [U-Boot] [PATCH 12/19] powerpc: mpc85xx: remove MPC8544DS support   Masahiro Yamada
• [U-Boot] [PATCH 13/19] powerpc: mpc85xx: remove MPC8548CDS support   Masahiro Yamada
• [U-Boot] [PATCH 14/19] powerpc: mpc85xx: remove MPC8555CDS support   Masahiro Yamada
• [U-Boot] [PATCH 15/19] powerpc: mpc85xx: remove MPC8560ADS support   Masahiro Yamada
• [U-Boot] [PATCH 16/19] powerpc: mpc85xx: remove MPC8568MDS support   Masahiro Yamada
• [U-Boot] [PATCH 17/19] powerpc: mpc85xx: remove MPC8569MDS support   Masahiro Yamada
• [U-Boot] [PATCH 18/19] powerpc: mpc86xx: remove MPC8610HPCD support   Masahiro Yamada
• [U-Boot] [PATCH 19/19] powerpc: mpc86xx: remove sbc8641d support   Masahiro Yamada
• [U-Boot] [PATCH 00/15] ARM: uniphier: use pinctrl drivers and some cleanups   Masahiro Yamada
• [U-Boot] [PATCH 01/15] pinctrl: uniphier: add UniPhier pinctrl core support   Masahiro Yamada
• [U-Boot] [PATCH 02/15] pinctrl: uniphier: add UniPhier PH1-LD4 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH 03/15] pinctrl: uniphier: add UniPhier PH1-Pro4 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH 04/15] pinctrl: uniphier: add UniPhier PH1-sLD8 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH 05/15] pinctrl: uniphier: add UniPhier PH1-Pro5 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH 06/15] pinctrl: uniphier: add UniPhier ProXstream2 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH 07/15] pinctrl: uniphier: add UniPhier PH1-LD6b pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH 08/15] ARM: uniphier: enable simple-bus driver for SPL   Masahiro Yamada
• [U-Boot] [PATCH 09/15] ARM: uniphier: increase CONFIG_SYS_MALLOC_F_LEN to bind all nodes   Masahiro Yamada
• [U-Boot] [PATCH 10/15] ARM: dts: uniphier: prepare device trees to use pinctrl in SPL   Masahiro Yamada
• [U-Boot] [PATCH 11/15] ARM: uniphier: enable PINCTRL and SPL_PINCTRL   Masahiro Yamada
• [U-Boot] [PATCH 12/15] ARM: uniphier: drop ad-hoc early pin-muxing settings   Masahiro Yamada
• [U-Boot] [PATCH 13/15] ARM: uniphier: drop DCC micro support card support   Masahiro Yamada
• [U-Boot] [PATCH 14/15] ARM: uniphier: enable setexpr command   Masahiro Yamada
• [U-Boot] [PATCH 15/15] ARM: uniphier: change the external bus address mapping   Masahiro Yamada
• [U-Boot] [PATCH 00/19] Janitorial: powerpc: remove PowerPC non-generic boards   Masahiro Yamada
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Masahiro Yamada
• [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Masahiro Yamada
• [U-Boot] [PATCH 00/45] arm: Remove boards that have not moved to generic board init   Masahiro Yamada
• [U-Boot] [PATCH v2 0/9] Janitorial: powerpc: remove PowerPC non-generic boards   Masahiro Yamada
• [U-Boot] [PATCH v2 1/9] powerpc: ppc4xx: remove alpr support   Masahiro Yamada
• [U-Boot] [PATCH v2 2/9] powerpc: ppc4xx: remove csb272, csb472 support   Masahiro Yamada
• [U-Boot] [PATCH v2 3/9] powerpc: ppc4xx: remove lwmon5 support   Masahiro Yamada
• [U-Boot] [PATCH v2 4/9] powerpc: ppc4xx: remove p3p440 support   Masahiro Yamada
• [U-Boot] [PATCH v2 5/9] powerpc: ppc4xx: remove pcs440ep support   Masahiro Yamada
• [U-Boot] [PATCH v2 6/9] powerpc: ppc4xx: remove sbc405 support   Masahiro Yamada
• [U-Boot] [PATCH v2 7/9] powerpc: ppc4xx: remove zeus support   Masahiro Yamada
• [U-Boot] [PATCH v2 8/9] powerpc: mpc5xx: remove cmi_mpc5xx support   Masahiro Yamada
• [U-Boot] [PATCH v2 9/9] powerpc: mpc85xx: remove stxgp3, stxssa support   Masahiro Yamada
• [U-Boot] [PATCH 01/15] pinctrl: uniphier: add UniPhier pinctrl core support   Masahiro Yamada
• [U-Boot] [PATCH] pinctrl: move dm_scan_fdt_node() out of pinctrl uclass   Masahiro Yamada
• [U-Boot] [PATCH] pinctrl: move dm_scan_fdt_node() out of pinctrl uclass   Masahiro Yamada
• [U-Boot] [PATCH] pinctrl: move dm_scan_fdt_node() out of pinctrl uclass   Masahiro Yamada
• [U-Boot] [PATCH v2] pinctrl: move dm_scan_fdt_node() out of pinctrl uclass   Masahiro Yamada
• [U-Boot] [PATCH] pinctrl: move dm_scan_fdt_node() out of pinctrl uclass   Masahiro Yamada
• [U-Boot] [PATCH v2 00/18] ARM: uniphier: use pinctrl drivers and some cleanups   Masahiro Yamada
• [U-Boot] [PATCH v2 01/18] pinctrl: uniphier: add UniPhier pinctrl core support   Masahiro Yamada
• [U-Boot] [PATCH v2 02/18] pinctrl: uniphier: add UniPhier PH1-LD4 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH v2 03/18] pinctrl: uniphier: add UniPhier PH1-Pro4 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH v2 04/18] pinctrl: uniphier: add UniPhier PH1-sLD8 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH v2 05/18] pinctrl: uniphier: add UniPhier PH1-Pro5 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH v2 06/18] pinctrl: uniphier: add UniPhier ProXstream2 pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH v2 07/18] pinctrl: uniphier: add UniPhier PH1-LD6b pinctrl driver   Masahiro Yamada
• [U-Boot] [PATCH v2 08/18] ARM: uniphier: enable simple-bus driver for SPL   Masahiro Yamada
• [U-Boot] [PATCH v2 09/18] ARM: uniphier: increase CONFIG_SYS_MALLOC_F_LEN to bind all nodes   Masahiro Yamada
• [U-Boot] [PATCH v2 10/18] ARM: dts: uniphier: prepare device trees to use pinctrl in SPL   Masahiro Yamada
• [U-Boot] [PATCH v2 11/18] ARM: uniphier: enable PINCTRL and SPL_PINCTRL   Masahiro Yamada
• [U-Boot] [PATCH v2 12/18] ARM: uniphier: drop ad-hoc early pin-muxing settings   Masahiro Yamada
• [U-Boot] [PATCH v2 13/18] ARM: uniphier: drop ad-hoc input enable settings   Masahiro Yamada
• [U-Boot] [PATCH v2 14/18] ARM: uniphier: drop DCC micro support card support   Masahiro Yamada
• [U-Boot] [PATCH v2 15/18] ARM: uniphier: enable setexpr command   Masahiro Yamada
• [U-Boot] [PATCH v2 16/18] ARM: uniphier: change the external bus address mapping   Masahiro Yamada
• [U-Boot] [PATCH v2 17/18] ARM: uniphier: remove ifdef CONFIG_{SOC} conditionals from sg-regs.h   Masahiro Yamada
• [U-Boot] [PATCH v2 18/18] ARM: uniphier: parse device tree to determine DRAM base and size   Masahiro Yamada
• [U-Boot] [PATCH 0/5] ARM: uniphier: further cleanup   Masahiro Yamada
• [U-Boot] [PATCH 1/5] ARM: uniphier: remove unused header file   Masahiro Yamada
• [U-Boot] [PATCH 2/5] ARM: uniphier: remove useless wrapper functions   Masahiro Yamada
• [U-Boot] [PATCH 3/5] ARM: uniphier: refactor LED function   Masahiro Yamada
• [U-Boot] [PATCH 4/5] ARM: uniphier: move CONFIG_SUPPORT_CARD_* macros to local file   Masahiro Yamada
• [U-Boot] [PATCH 5/5] ARM: uniphier: allow to disable CONFIG_MICRO_SUPPORT_CARD   Masahiro Yamada
• [U-Boot] [PATCH 5/6] Sort README.scrapyard   Masahiro Yamada
• [U-Boot] [PATCH] dts: do not cut down pinctrl-0 and pinctrl-names for SPL full-pinctrl   Masahiro Yamada
• [U-Boot] [PATCH] arm: Remove unused ST-Ericsson u8500 arch   Masahiro Yamada
• [U-Boot] [PATCH] kbuild: fixdep: drop meaningless hash table initialization   Masahiro Yamada
• [U-Boot] [PATCH v2 00/14] ARM: uniphier: clean-up, refactor, and then new SoCs support   Masahiro Yamada
• [U-Boot] [PATCH v2 01/14] ARM: uniphier: remove unused header file   Masahiro Yamada
• [U-Boot] [PATCH v2 02/14] ARM: uniphier: remove useless wrapper functions   Masahiro Yamada
• [U-Boot] [PATCH v2 03/14] ARM: uniphier: refactor LED function   Masahiro Yamada
• [U-Boot] [PATCH v2 04/14] ARM: uniphier: move CONFIG_SUPPORT_CARD_* macros to local file   Masahiro Yamada
• [U-Boot] [PATCH v2 05/14] ARM: uniphier: allow to disable CONFIG_MICRO_SUPPORT_CARD   Masahiro Yamada
• [U-Boot] [PATCH v2 06/14] ARM: uniphier: rename CONFIG_MACH_* to CONFIG_ARCH_UNIPHIER_*   Masahiro Yamada
• [U-Boot] [PATCH v2 07/14] ARM: uniphier: delete unneeded input enable for low-level debug   Masahiro Yamada
• [U-Boot] [PATCH v2 08/14] ARM: uniphier: fix glitch signal problem for low-level debug   Masahiro Yamada
• [U-Boot] [PATCH v2 09/14] ARM: uniphier: unify low-level debug init code   Masahiro Yamada
• [U-Boot] [PATCH v2 10/14] ARM: uniphier: remove kernel parameter settings from environment   Masahiro Yamada
• [U-Boot] [PATCH v2 11/14] ARM: uniphier: allow to enable multiple SoCs   Masahiro Yamada
• [U-Boot] [PATCH v2 12/14] ARM: uniphier: add PH1-Pro5 support   Masahiro Yamada
• [U-Boot] [PATCH v2 13/14] ARM: uniphier: add ProXstream2 and PH1-LD6b support   Masahiro Yamada
• [U-Boot] [PATCH v2 14/14] ARM: uniphier: fix init page table for ProXstream2/PH1-LD6b USB boot   Masahiro Yamada
• [U-Boot] [PATCH v2 00/18] ARM: uniphier: use pinctrl drivers and some cleanups   Masahiro Yamada
• [U-Boot] [PATCH v2 00/14] ARM: uniphier: clean-up, refactor, and then new SoCs support   Masahiro Yamada
• [U-Boot] Pull request: u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] buildman toolchains   Masahiro Yamada
• [U-Boot] Pull request: u-boot-uniphier/master   Masahiro Yamada
• [U-Boot] [PATCH] ARM: dts: uniphier: use SPDX-License-Identifier   Masahiro Yamada
• [U-Boot] [PATCH] ARM: dts: uniphier: use SPDX-License-Identifier   Masahiro Yamada
• [U-Boot] pull request: u-boot-uniphier/master (2nd round)   Masahiro Yamada
• [U-Boot] [PATCH v5 0/3] add pinctrl driver framework   Masahiro Yamada
• [U-Boot] [PATCH v5 0/3] add pinctrl driver framework   Masahiro Yamada
• [U-Boot] [PATCH] tools: moveconfig: Update the URL for nds32 toolchain   Masahiro Yamada
• [U-Boot] [PATCH] serial: rockchip: make ROCKCHIP_SERIAL depend on ARCH_ROCKCHIP   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: fix address mapping in README.uniphier   Masahiro Yamada
• [U-Boot] [PATCH] gpio: atmel: Add the PIO4 driver support   Wenyou Yang
• [U-Boot] [PATCH] arm: at91: Change the Chip ID registers' addresses   Wenyou Yang
• [U-Boot] [PATCH] arm: at91: clock: Add the generated clock support   Wenyou Yang
• [U-Boot] [PATCH] arm: at91: clock: Add the generated clock support   Yang, Wenyou
• [U-Boot] [PATCH] arm: at91: clock: Add the generated clock support   Yang, Wenyou
• [U-Boot] [PATCH] mmc: sdhci: Fix the SD clock stop sequence   Wenyou Yang
• [U-Boot] [PATCH] mmc: atmel: Add support fo atmel sdhci   Wenyou Yang
• [U-Boot] [PATCH] mmc: atmel: Add support fo atmel sdhci   Yang, Wenyou
• [U-Boot] [PATCH v2] mmc: sdhci: Fix the SD clock stop sequence   Wenyou Yang
• [U-Boot] [PATCH] mmc: sdhci: Fix the SD clock stop sequence   Yang, Wenyou
• [U-Boot] [PATCH v2] mmc: atmel: Add atmel sdhci support   Wenyou Yang
• [U-Boot] [PATCH] arm: atmel: Add SAMA5D2 Xplained board   Wenyou Yang
• [U-Boot] [PATCH] ls1021atwr: sdboot: change serdes 0x20 to 0x30   Yuan Yao
• [U-Boot] [PATCH 1/3] dm: dts: ls1021a-twr: Enable DSPI2 on LS1021ATWR   Yuan Yao
• [U-Boot] [PATCH 2/3] mtd: sf: Add support AT26DF081A chip   Yuan Yao
• [U-Boot] [PATCH 3/3] configs: ls1021atwr: Enable DSPI for LS1021ATWR   Yuan Yao
• [U-Boot] [PATCH] configs: ls1021atwr: Enable ID EEPROM for SD boot   Yuan Yao
• [U-Boot] [PATCH] arm: ls1021atwr: optimize the deep sleep latency   Tang Yuantian
• [U-Boot] [PATCH v1] fix: possible overflow when copying the string   Imran Zaman
• [U-Boot] [PATCH v1 1/1] fix: possible overflow when copying the string   Imran Zaman
• [U-Boot] [Patch v2 08/16] net/fm: fix compile warnings for 64-bit platform   Hou Zhiqiang
• [U-Boot] [Patch v2 08/16] net/fm: fix compile warnings for 64-bit platform   Hou Zhiqiang
• [U-Boot] [PATCH v2 1/2] Move malloc_cache_aligned() to its own header   Marcel Ziswiler
• [U-Boot] ## Application terminated, rc = 0x1   ba_f
• [U-Boot] ## Application terminated, rc = 0x1   ba_f
• [U-Boot] conditional execution in uboot   dpenev
• [U-Boot] [PATCH] Powerpc: eSDHC: expand a fix to T4160   shh.xie at gmail.com
• [U-Boot] [PATCH] armv8: ls2085ardb: enable CONFIG_PHY_AQUANTIA   shh.xie at gmail.com
• [U-Boot] [UBOOT PATCH 1/1] gpio: lpc32xx: fix issues with port3 gpio   slemieux.tyco at gmail.com
• [U-Boot] [PATCH v2 1/1] gpio: lpc32xx: fix issues with port3 gpio   slemieux.tyco at gmail.com
• [U-Boot] [PATCH 1/1] net: phy: micrel: add support for KSZ8021RNL & KSZ8031RNL   slemieux.tyco at gmail.com
• [U-Boot] [PATCH v5] bitops: introduce BIT() definition   ivan.khoronzhuk
• [U-Boot] [PATCH 1/6] arm: Remove edb9315a board   sergey kostanbaev
• [U-Boot] [PATCHv2] arm: socfpga: Add support for the Terasic DE-0 Atlas board   dinguyen at opensource.altera.com
• [U-Boot] [PATCH] ARM: socfpga: Enable saveenv for SD/MMC   dinguyen at opensource.altera.com
• [U-Boot] [PATCH 1/3] arm: socfpga: rename socfpga_cyclone5 and socfpga_arria5 config files   dinguyen at opensource.altera.com
• [U-Boot] [PATCH 2/3] arm: socfpga: update MAINTAINERS' file for cyclone5_socdk and arria5_socdk   dinguyen at opensource.altera.com
• [U-Boot] [PATCH 3/3] arm: socfpga: Enable saveenv for SD/MMC   dinguyen at opensource.altera.com
• [U-Boot] [PATCHv3] arm: socfpga: Enable saveenv for SD/MMC   dinguyen at opensource.altera.com
• [U-Boot] [PATCHv4] arm: socfpga: Enable saveenv for SD/MMC   dinguyen at opensource.altera.com
• [U-Boot] u-boot hangs in spl fat load when Linux image size exceeds one cluster   Lixun.Lin at rohde-schwarz.com
• [U-Boot] [PATCH] Allow imxtract to extract part of script image.   p.aubert at staubli.com