[U-Boot] [PATCH 4/7] dm: pmic: add s2mps11 PMIC I/O driver
Przemyslaw Marczak
p.marczak at samsung.com
Fri Sep 4 17:04:25 CEST 2015
Hello,
On 09/01/2015 02:33 AM, Simon Glass wrote:
> On 28 August 2015 at 07:59, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
>> This driver allows I/O operations on the Samsung S2MPS11 PMIC,
>> which provides lots of LDO/BUCK outputs.
>>
>> To enable it, update defconfig with:
>> - CONFIG_DM_PMIC_S2MPS11
>> and additional, if were not defined:
>> - CONFIG_CMD_PMIC
>> - CONFIG_ERRNO_STR
>>
>> The binding info: doc/device-tree-bindings/pmic/s2mps11.txt
>>
>> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
>> ---
>> doc/device-tree-bindings/pmic/s2mps11.txt | 17 +++++
>> drivers/power/pmic/Kconfig | 14 ++++
>> drivers/power/pmic/Makefile | 1 +
>> drivers/power/pmic/s2mps11.c | 60 ++++++++++++++++
>> include/power/s2mps11.h | 109 ++++++++++++++++++++++++++++++
>> 5 files changed, 201 insertions(+)
>> create mode 100644 doc/device-tree-bindings/pmic/s2mps11.txt
>> create mode 100644 drivers/power/pmic/s2mps11.c
>> create mode 100644 include/power/s2mps11.h
>
> Reviewed-by: Simon Glass <sjg at chromium.org>
>
> (2 nits below)
>
>>
>> diff --git a/doc/device-tree-bindings/pmic/s2mps11.txt b/doc/device-tree-bindings/pmic/s2mps11.txt
>> new file mode 100644
>> index 0000000..db8d624
>> --- /dev/null
>> +++ b/doc/device-tree-bindings/pmic/s2mps11.txt
>> @@ -0,0 +1,17 @@
>> +SAMSUBNG, S2MPS11 PMIC
>> +
>> +This file describes the binding info for the PMIC driver:
>> +- drivers/power/pmic/s2mps11.c
>> +
>> +Required properties:
>> +- compatible: "samsung,s2mps11-pmic"
>> +- reg = 0x66
>> +
>> +With those two properties, the pmic device can be used for read/write only.
>> +
>> +Example:
>> +
>> +s2mps11 at 66 {
>> + compatible = "samsung,s2mps11-pmic";
>> + reg = <0x66>;
>> +};
>> diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
>> index fc6a374..c66b352 100644
>> --- a/drivers/power/pmic/Kconfig
>> +++ b/drivers/power/pmic/Kconfig
>> @@ -24,6 +24,20 @@ config DM_PMIC_MAX77686
>> This config enables implementation of driver-model pmic uclass features
>> for PMIC MAX77686. The driver implements read/write operations.
>>
>> +config DM_PMIC_S2MPS11
>
> nit: I don't think this should have a DM_ prefix. Remember that all
> the CONFIG_DM_... options are going to be removed one day. It is
> intended to select the DM version of a subsystem. In your case you
> only have a DM version of the driver, so just CONFIG_PMIC_S2MPS11
> seems fine.
>
Ah, ok. I will update this.
>> + bool "Enable Driver Model for PMIC Samsung S2MPS11"
>> + depends on DM_PMIC
>> + ---help---
>> + The Samsung S2MPS11 PMIC provides:
>> + - 38 adjustable LDO regulators
>> + - 9 High-Efficiency Buck Converters
>> + - 1 BuckBoost Converter
>> + - RTC with two alarms
>> + - Backup battery charger
>> + - I2C Configuration Interface
>> + This driver provides access to I/O interface only.
>> + Binding info: doc/device-tree-bindings/pmic/s2mps11.txt
>> +
>> config DM_PMIC_SANDBOX
>> bool "Enable Driver Model for emulated Sandbox PMIC "
>> depends on DM_PMIC
>> diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
>> index 99c5778..1b58d98 100644
>> --- a/drivers/power/pmic/Makefile
>> +++ b/drivers/power/pmic/Makefile
>> @@ -8,6 +8,7 @@
>> obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
>> obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
>> obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze100.o
>> +obj-$(CONFIG_DM_PMIC_S2MPS11) += s2mps11.o
>> obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
>> obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
>> obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
>> diff --git a/drivers/power/pmic/s2mps11.c b/drivers/power/pmic/s2mps11.c
>> new file mode 100644
>> index 0000000..7e28402
>> --- /dev/null
>> +++ b/drivers/power/pmic/s2mps11.c
>> @@ -0,0 +1,60 @@
>> +/*
>> + * Copyright (C) 2015 Samsung Electronics
>> + * Przemyslaw Marczak <p.marczak at samsung.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <fdtdec.h>
>> +#include <errno.h>
>> +#include <dm.h>
>> +#include <i2c.h>
>> +#include <power/pmic.h>
>> +#include <power/s2mps11.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +static int s2mps11_reg_count(struct udevice *dev)
>> +{
>> + return S2MPS11_REG_COUNT;
>> +}
>> +
>> +static int s2mps11_write(struct udevice *dev, uint reg, const uint8_t *buff,
>> + int len)
>> +{
>> + if (dm_i2c_write(dev, reg, buff, len)) {
>> + error("write error to device: %p register: %#x!", dev, reg);
>> + return -EIO;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int s2mps11_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
>> +{
>> + if (dm_i2c_read(dev, reg, buff, len)) {
>> + error("read error from device: %p register: %#x!", dev, reg);
>> + return -EIO;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static struct dm_pmic_ops s2mps11_ops = {
>> + .reg_count = s2mps11_reg_count,
>> + .read = s2mps11_read,
>> + .write = s2mps11_write,
>> +};
>> +
>> +static const struct udevice_id s2mps11_ids[] = {
>> + { .compatible = "samsung,s2mps11-pmic" },
>> + { }
>> +};
>> +
>> +U_BOOT_DRIVER(pmic_s2mps11) = {
>> + .name = "s2mps11_pmic",
>> + .id = UCLASS_PMIC,
>> + .of_match = s2mps11_ids,
>> + .ops = &s2mps11_ops,
>> +};
>> diff --git a/include/power/s2mps11.h b/include/power/s2mps11.h
>> new file mode 100644
>> index 0000000..885a816
>> --- /dev/null
>> +++ b/include/power/s2mps11.h
>> @@ -0,0 +1,109 @@
>> +#ifndef __INCLUDE__S2MPS11__H__
>
> nit: I don't think you need __INCLUDE__ here
>
ok, will remove.
>> +#define __INCLUDE__S2MPS11__H__
>> +
>> +enum s2mps11_reg {
>> + S2MPS11_REG_ID = 0,
>> + S2MPS11_REG_INT1,
>> + S2MPS11_REG_INT2,
>> + S2MPS11_REG_INT3,
>> + S2MPS11_REG_INT1M,
>> + S2MPS11_REG_INT2M,
>> + S2MPS11_REG_INT3M,
>> + S2MPS11_REG_STATUS1,
>> + S2MPS11_REG_STATUS2,
>> + S2MPS11_REG_OFFSRC,
>> + S2MPS11_REG_PWRONSRC,
>> + S2MPS11_REG_RTC_CTRL,
>> + S2MPS11_REG_CTRL1,
>> + S2MPS11_REG_ETC_TEST,
>> + S2MPS11_REG_RSVD3,
>> + S2MPS11_REG_BU_CHG,
>> + S2MPS11_REG_RAMP,
>> + S2MPS11_REG_RAMP_BUCK,
>> + S2MPS11_REG_LDO1_8,
>> + S2MPS11_REG_LDO9_16,
>> + S2MPS11_REG_LDO17_24,
>> + S2MPS11_REG_LDO25_32,
>> + S2MPS11_REG_LDO33_38,
>> + S2MPS11_REG_LDO1_8_OVC,
>> + S2MPS11_REG_LDO9_16_OVC,
>> + S2MPS11_REG_LDO17_24_OVC,
>> + S2MPS11_REG_LDO25_32_OVC,
>> + S2MPS11_REG_LDO33_38_OVC,
>> + S2MPS11_REG_RESERVED1,
>> + S2MPS11_REG_RESERVED2,
>> + S2MPS11_REG_RESERVED3,
>> + S2MPS11_REG_RESERVED4,
>> + S2MPS11_REG_RESERVED5,
>> + S2MPS11_REG_RESERVED6,
>> + S2MPS11_REG_RESERVED7,
>> + S2MPS11_REG_RESERVED8,
>> + S2MPS11_REG_WDRSTEN_CTRL,
>> + S2MPS11_REG_B1CTRL1,
>> + S2MPS11_REG_B1CTRL2,
>> + S2MPS11_REG_B2CTRL1,
>> + S2MPS11_REG_B2CTRL2,
>> + S2MPS11_REG_B3CTRL1,
>> + S2MPS11_REG_B3CTRL2,
>> + S2MPS11_REG_B4CTRL1,
>> + S2MPS11_REG_B4CTRL2,
>> + S2MPS11_REG_B5CTRL1,
>> + S2MPS11_REG_BUCK5_SW,
>> + S2MPS11_REG_B5CTRL2,
>> + S2MPS11_REG_B5CTRL3,
>> + S2MPS11_REG_B5CTRL4,
>> + S2MPS11_REG_B5CTRL5,
>> + S2MPS11_REG_B6CTRL1,
>> + S2MPS11_REG_B6CTRL2,
>> + S2MPS11_REG_B7CTRL1,
>> + S2MPS11_REG_B7CTRL2,
>> + S2MPS11_REG_B8CTRL1,
>> + S2MPS11_REG_B8CTRL2,
>> + S2MPS11_REG_B9CTRL1,
>> + S2MPS11_REG_B9CTRL2,
>> + S2MPS11_REG_B10CTRL1,
>> + S2MPS11_REG_B10CTRL2,
>> + S2MPS11_REG_L1CTRL,
>> + S2MPS11_REG_L2CTRL,
>> + S2MPS11_REG_L3CTRL,
>> + S2MPS11_REG_L4CTRL,
>> + S2MPS11_REG_L5CTRL,
>> + S2MPS11_REG_L6CTRL,
>> + S2MPS11_REG_L7CTRL,
>> + S2MPS11_REG_L8CTRL,
>> + S2MPS11_REG_L9CTRL,
>> + S2MPS11_REG_L10CTRL,
>> + S2MPS11_REG_L11CTRL,
>> + S2MPS11_REG_L12CTRL,
>> + S2MPS11_REG_L13CTRL,
>> + S2MPS11_REG_L14CTRL,
>> + S2MPS11_REG_L15CTRL,
>> + S2MPS11_REG_L16CTRL,
>> + S2MPS11_REG_L17CTRL,
>> + S2MPS11_REG_L18CTRL,
>> + S2MPS11_REG_L19CTRL,
>> + S2MPS11_REG_L20CTRL,
>> + S2MPS11_REG_L21CTRL,
>> + S2MPS11_REG_L22CTRL,
>> + S2MPS11_REG_L23CTRL,
>> + S2MPS11_REG_L24CTRL,
>> + S2MPS11_REG_L25CTRL,
>> + S2MPS11_REG_L26CTRL,
>> + S2MPS11_REG_L27CTRL,
>> + S2MPS11_REG_L28CTRL,
>> + S2MPS11_REG_L29CTRL,
>> + S2MPS11_REG_L30CTRL,
>> + S2MPS11_REG_L31CTRL,
>> + S2MPS11_REG_L32CTRL,
>> + S2MPS11_REG_L33CTRL,
>> + S2MPS11_REG_L34CTRL,
>> + S2MPS11_REG_L35CTRL,
>> + S2MPS11_REG_L36CTRL,
>> + S2MPS11_REG_L37CTRL,
>> + S2MPS11_REG_L38CTRL,
>> + S2MPS11_REG_COUNT,
>> +};
>> +
>> +#define S2MPS11_LDO26_ENABLE 0xec
>> +
>> +#endif
>> --
>> 1.9.1
>>
>
> Regards,
> Simon
>
Thanks,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
More information about the U-Boot
mailing list