[U-Boot] [PATCH 0/4] Fix operation on Odroid devices

[Tobias Jakobi]

Hello,

Jaehoon Chung wrote:
> Hi,
> 
> On 09/21/2015 08:18 AM, Tobias Jakobi wrote:
>> Hello,
>>
>> currently operation on Exynos4412-based Odroid devices is broken.
>>
>> The bootloader stops with this message:
>> Card did not respond to voltage select!
>> *** Warning - MMC init failed, using default environment
> 
> Which board did you use? and Which cad is failed? SD or eMMC?
This is an Odroid-X2. I'm booting from SD with a Sandisk Extreme. I
don't have any eMMC here.

Actually it was some other person who encountered this issue with his
Odroid-X2 and booting from SD. After he made me aware of it, I also
updated my u-boot (I was then using a version from May 2015, which works
perfectly btw) and encountered the very same issue as him.



> Your [PATCH 4/4] is strange..so i want to get more information.
For me it restores proper operation of the bootloader to the board.


With best wishes,
Tobias


> 
> If you can share more information, i can explain more exactly about your problem.
> 
> Best Regards,
> Jaehoon Chung
> 
>>
>> This series fixes error handling in the s5p sdhci driver
>> and the cause of the issue, which is an inverted card
>> detection check.
>>
>> Thanks goes to Marek Vasut and Sjoerd Simons who helped
>> me on IRC to get this triaged.
>>
>> With best wishes,
>> Tobias
>>
>> Tobias Jakobi (4):
>>   exynos: Properly initialize host_caps in s5p_sdhci_core_init()
>>   exynos: Fix passing of errors in exynos_mmc_init()
>>   exynos: be more verbose in process_nodes()
>>   exynos: fix and cleanup do_sdhci_init()
>>
>>  drivers/mmc/s5p_sdhci.c | 39 +++++++++++++++++++++++----------------
>>  1 file changed, 23 insertions(+), 16 deletions(-)
>>
>