[U-Boot] [PATCH v2 4/4] exynos: more debug and cleanup in do_sdhci_init()

[Przemyslaw Marczak]

Hello,

On 09/25/2015 07:18 PM, Tobias Jakobi wrote:
> Add more debug printfs in do_sdhci_init() for calls
> that can potentially fail.
>
> Signed-off-by: Tobias Jakobi <tjakobi at math.uni-bielefeld.de>
> ---
>   drivers/mmc/s5p_sdhci.c | 20 +++++++++++---------
>   1 file changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
> index b60bc23..f88d76b 100644
> --- a/drivers/mmc/s5p_sdhci.c
> +++ b/drivers/mmc/s5p_sdhci.c
> @@ -102,29 +102,31 @@ struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS];
>
>   static int do_sdhci_init(struct sdhci_host *host)
>   {
> -	int dev_id, flag;
> -	int err = 0;
> +	int dev_id, flag, ret;
>
>   	flag = host->bus_width == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
>   	dev_id = host->index + PERIPH_ID_SDMMC0;
>
>   	if (dm_gpio_is_valid(&host->pwr_gpio)) {
>   		dm_gpio_set_value(&host->pwr_gpio, 1);
> -		err = exynos_pinmux_config(dev_id, flag);
> -		if (err) {
> +		ret = exynos_pinmux_config(dev_id, flag);
> +		if (ret) {
>   			debug("MMC not configured\n");
> -			return err;
> +			return ret;
>   		}
>   	}
>
>   	if (dm_gpio_is_valid(&host->cd_gpio)) {
> -		if (dm_gpio_get_value(&host->cd_gpio))
> +		ret = dm_gpio_get_value(&host->cd_gpio);
> +		if (ret) {
> +			debug("no SD card detected (%d)\n", ret);
>   			return -ENODEV;
> +		}
>
> -		err = exynos_pinmux_config(dev_id, flag);
> -		if (err) {
> +		ret = exynos_pinmux_config(dev_id, flag);
> +		if (ret) {
>   			printf("external SD not configured\n");
> -			return err;
> +			return ret;
>   		}
>   	}
>
>

Acked-by: Przemyslaw Marczak <p.marczak at samsung.com>

Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com