[U-Boot] [RESEND PATCH v3 5/5] sunxi: add NetConsole by default for Banana Pi/Pro

[Bernhard Nortmann]

Simon Glass and Joe Hershberger suggested adding at least one
test case for the CONFIG_DM_ETH plus CONFIG_NETCONSOLE options.

This patch enables NetConsole as a default for the "Banana Pi/Pro"
sunxi boards.

(By the nature of this patch it could probably be extended later
to include all sunxi boards using CONFIG_SUNXI_[EG]MAC.)

Signed-off-by: Bernhard Nortmann <bernhard.nortmann at web.de>
Acked-by: Joe Hershberger <joe.hershberger at ni.com>

---

Changes in v3: None
Changes in v2: None

 configs/Bananapi_defconfig  | 3 ++-
 configs/Bananapro_defconfig | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
index 560295f..898631d 100644
--- a/configs/Bananapi_defconfig
+++ b/configs/Bananapi_defconfig
@@ -2,8 +2,8 @@ CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
-CONFIG_GMAC_TX_DELAY=3
 CONFIG_VIDEO_COMPOSITE=y
+CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
@@ -11,5 +11,6 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHC
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+CONFIG_NETCONSOLE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
index 346db34..e9909d9 100644
--- a/configs/Bananapro_defconfig
+++ b/configs/Bananapro_defconfig
@@ -4,8 +4,8 @@ CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN="PH0"
 CONFIG_USB2_VBUS_PIN="PH1"
-CONFIG_GMAC_TX_DELAY=3
 CONFIG_VIDEO_COMPOSITE=y
+CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
@@ -13,5 +13,6 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHC
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
+CONFIG_NETCONSOLE=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y
-- 
2.4.6