[U-Boot] [PATCH v4 00/16] spi: zynq qspi support

[Jagan Teki]

On 1 September 2015 at 13:53, Michal Simek <michal.simek at xilinx.com> wrote:
> On 09/01/2015 08:14 AM, Jagan Teki wrote:
>> Hi Michal/Siva,
>>
>> On 1 September 2015 at 11:41, Jagan Teki <jteki at openedev.com> wrote:
>>> These are the previous version patches-
>>> https://patchwork.ozlabs.org/patch/302945/
>>> https://patchwork.ozlabs.org/patch/264440/
>>>
>>> This series adds zynq qspi controller driver in driver model and
>>> enabled support on relevent zynq boards and tested the same.
>>>
>>> Branch to verify:
>>> $ git clone git://git.denx.de/u-boot-spi.git
>>> $ cd u-boot-spi
>>> $ git checkout -b master-next origin/master-next
>>
>> Please let me know for any comments, and also test the same.
>>
>>>
>>> Changes for v4:
>>>         - Rebase to master
>>>
>>> Changes for v3:
>>>         - Added driver-model to zynq-qspi driver
>>>         - devicetree support on zynq-qspi
>>>         - Enabled qspi nodes on relevent board dts files
>>>         - Enabled qspi driver on relevent board config files
>>>
>>> Changes for v3:
>>>         - Fixes with macro's addition
>>>
>>> Jagan Teki (16):
>>>   spi: Add zynq qspi controller driver
>>>   dts: zynq: Add zynq qspi controller nodes
>>>   doc: device-tree-bindings: spi: Add zynq qspi info
>>>   dts: microzed: Enable zynq qspi controller node
>>>   dts: zc702: Enable zynq qspi controller node
>>>   dts: zc706: Enable zynq qspi controller node
>>>   dts: zc770-xm010: Enable zynq qspi controller node
>>>   dts: zed: Enable zynq qspi controller node
>>>   configs: Enable legacy SPI flash interface support
>>>   zynq-common: Enable zynq qspi controller support
>>>   zynq-common: Enable Bank/Extended address register support
>>>   configs: zynq: Enable zynq qspi controller
>>>   spi: Kconfig: Add Zynq QSPI controller entry
>>>   spi: zynq_spi: Add config reg shift named macros
>>>   spi: zynq_spi: Rename baudrate divisor mask name
>>>   spi: zynq_spi: Store cs value into private data
>>>
>>>  arch/arm/dts/zynq-7000.dtsi                    |  12 +
>>>  arch/arm/dts/zynq-microzed.dts                 |   5 +
>>>  arch/arm/dts/zynq-zc702.dts                    |   5 +
>>>  arch/arm/dts/zynq-zc706.dts                    |   5 +
>>>  arch/arm/dts/zynq-zc770-xm010.dts              |   5 +
>>>  arch/arm/dts/zynq-zed.dts                      |   5 +
>>>  configs/zynq_microzed_defconfig                |   2 +
>>>  configs/zynq_zc702_defconfig                   |   2 +
>>>  configs/zynq_zc706_defconfig                   |   2 +
>>>  configs/zynq_zc70x_defconfig                   |   2 +
>>>  configs/zynq_zc770_xm010_defconfig             |   1 +
>>>  configs/zynq_zed_defconfig                     |   2 +
>>>  doc/device-tree-bindings/spi/spi-zynq-qspi.txt |  26 ++
>
> All these DTS patches are fine and here is my
> Acked-by: Michal Simek <michal.simek at xilinx.com>
>
> The rest will be checked by Siva.

Applied to u-boot-spi/master

thanks!
-- 
Jagan | openedev.