[U-Boot] [PATCH v4 00/16] spi: zynq qspi support

[Michal Simek]

On 09/01/2015 08:14 AM, Jagan Teki wrote:
> Hi Michal/Siva,
> 
> On 1 September 2015 at 11:41, Jagan Teki <jteki at openedev.com> wrote:
>> These are the previous version patches-
>> https://patchwork.ozlabs.org/patch/302945/
>> https://patchwork.ozlabs.org/patch/264440/
>>
>> This series adds zynq qspi controller driver in driver model and
>> enabled support on relevent zynq boards and tested the same.
>>
>> Branch to verify:
>> $ git clone git://git.denx.de/u-boot-spi.git
>> $ cd u-boot-spi
>> $ git checkout -b master-next origin/master-next
> 
> Please let me know for any comments, and also test the same.
> 
>>
>> Changes for v4:
>>         - Rebase to master
>>
>> Changes for v3:
>>         - Added driver-model to zynq-qspi driver
>>         - devicetree support on zynq-qspi
>>         - Enabled qspi nodes on relevent board dts files
>>         - Enabled qspi driver on relevent board config files
>>
>> Changes for v3:
>>         - Fixes with macro's addition
>>
>> Jagan Teki (16):
>>   spi: Add zynq qspi controller driver
>>   dts: zynq: Add zynq qspi controller nodes
>>   doc: device-tree-bindings: spi: Add zynq qspi info
>>   dts: microzed: Enable zynq qspi controller node
>>   dts: zc702: Enable zynq qspi controller node
>>   dts: zc706: Enable zynq qspi controller node
>>   dts: zc770-xm010: Enable zynq qspi controller node
>>   dts: zed: Enable zynq qspi controller node
>>   configs: Enable legacy SPI flash interface support
>>   zynq-common: Enable zynq qspi controller support
>>   zynq-common: Enable Bank/Extended address register support
>>   configs: zynq: Enable zynq qspi controller
>>   spi: Kconfig: Add Zynq QSPI controller entry
>>   spi: zynq_spi: Add config reg shift named macros
>>   spi: zynq_spi: Rename baudrate divisor mask name
>>   spi: zynq_spi: Store cs value into private data
>>
>>  arch/arm/dts/zynq-7000.dtsi                    |  12 +
>>  arch/arm/dts/zynq-microzed.dts                 |   5 +
>>  arch/arm/dts/zynq-zc702.dts                    |   5 +
>>  arch/arm/dts/zynq-zc706.dts                    |   5 +
>>  arch/arm/dts/zynq-zc770-xm010.dts              |   5 +
>>  arch/arm/dts/zynq-zed.dts                      |   5 +
>>  configs/zynq_microzed_defconfig                |   2 +
>>  configs/zynq_zc702_defconfig                   |   2 +
>>  configs/zynq_zc706_defconfig                   |   2 +
>>  configs/zynq_zc70x_defconfig                   |   2 +
>>  configs/zynq_zc770_xm010_defconfig             |   1 +
>>  configs/zynq_zed_defconfig                     |   2 +
>>  doc/device-tree-bindings/spi/spi-zynq-qspi.txt |  26 ++

All these DTS patches are fine and here is my
Acked-by: Michal Simek <michal.simek at xilinx.com>

The rest will be checked by Siva.

Thanks,
Michal