[U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board

[Dinh Nguyen]

On 08/31/2015 05:23 PM, Marek Vasut wrote:
> On Monday, August 31, 2015 at 09:57:05 PM, dinguyen at opensource.altera.com wrote:
>> From: Dinh Nguyen <dinguyen at opensource.altera.com>
>>
>> Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV
>> based board. The board can boot from SD/MMC. Ethernet is a bit different
>> because it has a KSZ9031 PHY, so for now, ethernet doesn't quite work yet,
>> as a few patches are needed to support the PHY.
> 
> I thought we did support the KSZ9031 PHY. What's the problem ?
> 

Yeah, I just realized that. That's the problem when I've been working
with v2013.10 U-Boot! I'll have ethernet in V2.

>> Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
>> ---
>> Hi Marek,
>>
>> This patch is based on your u-boot-socfpga/wip/boards branch.
> 
> OK, that makes sense.
> 
>> Thanks,
>> Dinh
>> ---
>>  arch/arm/dts/Makefile                        |   1 +
>>  arch/arm/dts/socfpga_cyclone5_de0_sockit.dts |  61 +++
>>  arch/arm/mach-socfpga/Kconfig                |   7 +
>>  board/terasic/de0/MAINTAINERS                |   5 +
>>  board/terasic/de0/Makefile                   |   9 +
> 
> I think it might be clearer to rename it to de0-nano-soc, what do you think ?
> What's the difference between de0-nano-soc and atlas btw ?
> 

I don't know. From the website, DE0-Nano-SoC Kit/Atlas-SoC Kit, so
DE0_Nano_SoCKit is synonymous with Atlas Sockit?

> [...]
> 
>> diff --git a/configs/socfpga_de0_defconfig b/configs/socfpga_de0_defconfig
>> new file mode 100644
>> index 0000000..000f322
>> --- /dev/null
>> +++ b/configs/socfpga_de0_defconfig
>> @@ -0,0 +1,21 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_SOCFPGA=y
>> +CONFIG_TARGET_SOCFPGA_CYCLONE5=y
>> +CONFIG_TARGET_SOCFPGA_TERASIC_DE0=y
>> +CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_sockit"
>> +CONFIG_SPL=y
>> +# CONFIG_CMD_IMLS is not set
>> +# CONFIG_CMD_FLASH is not set
>> +CONFIG_OF_CONTROL=y
>> +CONFIG_DM_ETH=y
>> +CONFIG_NETDEVICES=y
>> +CONFIG_ETH_DESIGNWARE=y
>> +CONFIG_DM_GPIO=y
>> +CONFIG_DWAPB_GPIO=y
>> +CONFIG_SPL_DM=y
>> +CONFIG_SPL_MMC_SUPPORT=y
>> +CONFIG_DM_SEQ_ALIAS=y
> 
> I think you don't need the DM_SEQ_ALIAS, it's needed only for QSPI
> to enforce the SPI NOR ordering.
> 

Right, I missed this one.

<snip>

>> +
>> +/* USB */
>> +#ifdef CONFIG_CMD_USB
>> +#define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
>> +#endif
>> +#define CONFIG_G_DNL_MANUFACTURER      "Terasic"
>> +
>> +/* Extra Environment */
>> +#define CONFIG_HOSTNAME		socfpga_cyclone5
> 
> socfpga_d0_nano_soc might be better ;-)
> 

Yeah..missed this one too.

>> +
>> +#define CONFIG_EXTRA_ENV_SETTINGS \
>> +	"verify=n\0" \
> 
> What's this "verify" variable for ?
> 

Copied from your SoCKit patch.

Thanks for reviewing.
Dinh