[U-Boot] [PATCH v4 07/16] dts: zc770-xm010: Enable zynq qspi controller node

[Jagan Teki]

Enabled zynq qspi controller node for zc770-xm010 board.

=> sf probe 0 -- bus0 for selecting spi controller
=> sf probe 1 -- bus1 for selecting qspi controller

Signed-off-by: Jagan Teki <jteki at openedev.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Michal Simek <michal.simek at xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
---
 arch/arm/dts/zynq-zc770-xm010.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index 680f24c..eec4c96 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -17,6 +17,7 @@
 		i2c0 = &i2c0;
 		serial0 = &uart1;
 		spi0 = &spi1;
+		spi1 = &qspi;
 	};
 
 	chosen {
@@ -53,6 +54,10 @@
 	};
 };
 
+&qspi {
+	status = "okay";
+};
+
 &can0 {
 	status = "okay";
 };
-- 
1.9.1