[U-Boot] [PATCH v2] zynq-common: Define spi args offset and size

[Jagan Teki]

On 14 September 2015 at 11:32, Siva Durga Prasad Paladugu
<siva.durga.paladugu at xilinx.com> wrote:
> Define CONFIG_SYS_SPI_ARGS_OFFS, CONFIG_SYS_SPI_ARGS_SIZE
> and CONFIG_SYS_SPI_KERNEL_OFFS which will be used in SPL
> spi mode. These macros defines the device tree offset, size
> and the kernel image offset in flash respectively.
>
> Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
> ---
> Changes for v2:
> - Moved the configs under  SPI-SPL as per review comment.
> - Updated the commit message with description of the configs.
> - Placed the kernel offset at 0x200000.
> - This patch is based on u-boot-spi/master branch
> ---
>  include/configs/zynq-common.h |    4 ++++
>  1 files changed, 4 insertions(+), 0 deletions(-)
>
> diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
> index f6dd03b..45dafe2 100644
> --- a/include/configs/zynq-common.h
> +++ b/include/configs/zynq-common.h
> @@ -355,6 +355,10 @@
>  #define CONFIG_SPL_SPI_LOAD
>  #define CONFIG_SPL_SPI_FLASH_SUPPORT
>  #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x100000
> +#define CONFIG_SYS_SPI_ARGS_OFFS       0x200000
> +#define CONFIG_SYS_SPI_ARGS_SIZE       0x80000
> +#define CONFIG_SYS_SPI_KERNEL_OFFS     (CONFIG_SYS_SPI_ARGS_OFFS + \
> +                                        CONFIG_SYS_SPI_ARGS_SIZE)

Still got SPL build issue

drivers/mtd/spi/sf_probe.c: In function 'spi_flash_std_probe':
drivers/mtd/spi/sf_probe.c:480:2: error: dereferencing pointer to
incomplete type
make[3]: *** [spl/drivers/mtd/spi/sf_probe.o] Error 1

Does this depends Simon, patches[1] you pointed earlier.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

thanks!
-- 
Jagan | openedev.