[U-Boot] [PATCH v5 3/4] x86: Convert to use driver model eth on quark/galileo

[Bin Meng]

Convert to use DM version of Designware ethernet driver on Intel
quark/galileo.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Acked-by: Simon Glass <sjg at chromium.org>

---

Changes in v5: None
Changes in v3: None
Changes in v2: None

 arch/x86/cpu/quark/quark.c | 19 -------------------
 configs/galileo_defconfig  |  2 +-
 2 files changed, 1 insertion(+), 20 deletions(-)

diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c
index 637c370..caa3875 100644
--- a/arch/x86/cpu/quark/quark.c
+++ b/arch/x86/cpu/quark/quark.c
@@ -6,8 +6,6 @@
 
 #include <common.h>
 #include <mmc.h>
-#include <netdev.h>
-#include <phy.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/pci.h>
@@ -231,23 +229,6 @@ int cpu_mmc_init(bd_t *bis)
 			    ARRAY_SIZE(mmc_supported));
 }
 
-int cpu_eth_init(bd_t *bis)
-{
-	u32 base;
-	int ret0, ret1;
-
-	qrk_pci_read_config_dword(QUARK_EMAC0, PCI_BASE_ADDRESS_0, &base);
-	ret0 = designware_initialize(base, PHY_INTERFACE_MODE_RMII);
-
-	qrk_pci_read_config_dword(QUARK_EMAC1, PCI_BASE_ADDRESS_0, &base);
-	ret1 = designware_initialize(base, PHY_INTERFACE_MODE_RMII);
-
-	if (ret0 < 0 && ret1 < 0)
-		return -1;
-	else
-		return 0;
-}
-
 void cpu_irq_init(void)
 {
 	struct quark_rcba *rcba;
diff --git a/configs/galileo_defconfig b/configs/galileo_defconfig
index d05154e..9623986 100644
--- a/configs/galileo_defconfig
+++ b/configs/galileo_defconfig
@@ -12,7 +12,7 @@ CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_CMD_BOOTSTAGE=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPI_FLASH=y
-CONFIG_NETDEVICES=y
+CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_DM_PCI=y
 CONFIG_DM_RTC=y
-- 
1.8.2.1