[U-Boot] [PATCH 2/4] imx-common: cpu: Do not print on invalid temperature

[Fabio Estevam]

It is not very useful to have the message below on every boot
(especially when we are using early silicon):

U-Boot 2015.10-rc2-23945-g37cf215 (Sep 08 2015 - 14:12:14 -0300)

CPU:   Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C)CPU:   Thermal invalid data, fuse: 0x0
 - invalid sensor device

, so turn the error message into debug level.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/imx-common/cpu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index e27546c..667b3f7 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -205,9 +205,9 @@ int print_cpuinfo(void)
 		if (!ret)
 			printf(" at %dC\n", cpu_tmp);
 		else
-			puts(" - invalid sensor data\n");
+			debug(" - invalid sensor data\n");
 	} else {
-		puts(" - invalid sensor device\n");
+		debug(" - invalid sensor device\n");
 	}
 #endif
 
-- 
1.9.1