[U-Boot] [PATCH 1/4] thermal: imx_thermal: Do not print on error

[Stefano Babic]

On 08/09/2015 19:43, Fabio Estevam wrote:
> It is not very useful to have the message below on every boot
> (especially when we are using early silicon):
> 
> U-Boot 2015.10-rc2-23945-g37cf215 (Sep 08 2015 - 14:12:14 -0300)
> 
> CPU:   Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
> CPU:   Commercial temperature grade (0C to 95C)CPU:   Thermal invalid data, fuse: 0x0
>  - invalid sensor device
> 
> , so turn the error message into debug level.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  drivers/thermal/imx_thermal.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
> index 3c6c967..04c43d7 100644
> --- a/drivers/thermal/imx_thermal.c
> +++ b/drivers/thermal/imx_thermal.c
> @@ -159,7 +159,7 @@ static int imx_thermal_probe(struct udevice *dev)
>  
>  	/* Check for valid fuse */
>  	if (fuse == 0 || fuse == ~0) {
> -		printf("CPU:   Thermal invalid data, fuse: 0x%x\n", fuse);
> +		debug("CPU:   Thermal invalid data, fuse: 0x%x\n", fuse);
>  		return -EPERM;
>  	}
>  
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================