[U-Boot] [PATCH v3 13/13] sf: Rename read register functions

Bin Meng bmeng.cn at gmail.com
Tue Sep 15 10:21:22 CEST 2015


Hi Jagan,

On Wed, Sep 2, 2015 at 2:09 PM, Jagan Teki <jteki at openedev.com> wrote:
> spi_flash_cmd_read_status -> read_sr
> spi_flash_cmd_read_config -> read_cr

Can you elaborate why this rename is needed? To me, read_sr() and
read_cr() are too generic names, and they are not static neither.

>
> Signed-off-by: Jagan Teki <jteki at openedev.com>
> ---
> Changes for v3:
>         - none
> Changes for v2:
>         - none
>
>  drivers/mtd/spi/sf_internal.h | 5 +----
>  drivers/mtd/spi/sf_ops.c      | 8 ++++----
>  drivers/mtd/spi/sf_probe.c    | 4 ++--
>  3 files changed, 7 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
> index e4cb198..e618306 100644
> --- a/drivers/mtd/spi/sf_internal.h
> +++ b/drivers/mtd/spi/sf_internal.h
> @@ -180,14 +180,11 @@ int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len,
>  /* Flash erase(sectors) operation, support all possible erase commands */
>  int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len);
>
> -/* Read the status register */
> -int spi_flash_cmd_read_status(struct spi_flash *flash);
> -
>  /* Program the status register */
>  int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws);
>
>  /* Read the config register */
> -int spi_flash_cmd_read_config(struct spi_flash *flash);
> +int read_cr(struct spi_flash *flash);
>
>  /* Program the config register */
>  int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc);
> diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
> index 77b053a..a27beb5 100644
> --- a/drivers/mtd/spi/sf_ops.c
> +++ b/drivers/mtd/spi/sf_ops.c
> @@ -26,7 +26,7 @@ static void spi_flash_addr(u32 addr, u8 *cmd)
>         cmd[3] = addr >> 0;
>  }
>
> -int spi_flash_cmd_read_status(struct spi_flash *flash)
> +int read_sr(struct spi_flash *flash)
>  {
>         int ret;
>         u8 rs;
> @@ -70,7 +70,7 @@ int spi_flash_cmd_write_status(struct spi_flash *flash, u8 ws)
>  }
>
>  #if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
> -int spi_flash_cmd_read_config(struct spi_flash *flash)
> +int read_cr(struct spi_flash *flash)
>  {
>         int ret;
>         u8 rc;
> @@ -90,7 +90,7 @@ int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc)
>         u8 cmd;
>         int ret, val;
>
> -       val = spi_flash_cmd_read_status(flash);
> +       val = read_sr(flash);
>         if (val < 0)
>                 return val;
>
> @@ -160,7 +160,7 @@ static inline int write_cfsr(struct spi_flash *flash)
>
>  static inline int spi_flash_sr_ready(struct spi_flash *flash)
>  {
> -       int sr = spi_flash_cmd_read_status(flash);
> +       int sr = read_sr(flash);
>         if (sr < 0)
>                 return sr;
>         else
> diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
> index 262849e..bf84f06 100644
> --- a/drivers/mtd/spi/sf_probe.c
> +++ b/drivers/mtd/spi/sf_probe.c
> @@ -37,7 +37,7 @@ static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
>  {
>         int qeb_status, ret;
>
> -       qeb_status = spi_flash_cmd_read_config(flash);
> +       qeb_status = read_cr(flash);
>         if (qeb_status < 0)
>                 return qeb_status;
>
> @@ -58,7 +58,7 @@ static int spi_flash_set_qeb_winspan(struct spi_flash *flash)
>  {
>         int qeb_status, ret;
>
> -       qeb_status = spi_flash_cmd_read_config(flash);
> +       qeb_status = read_cr(flash);
>         if (qeb_status < 0)
>                 return qeb_status;
>
> --

Regards,
Bin


More information about the U-Boot mailing list