[U-Boot] [PATCH 1/4] sf: params: Add IS25LP032 part support

[Siva Durga Prasad Paladugu]

Hi Jagan,

> -----Original Message-----
> From: Jagan Teki [mailto:jteki at openedev.com]
> Sent: Tuesday, September 08, 2015 2:52 PM
> To: u-boot at lists.denx.de
> Cc: Jagan Teki; Siva Durga Prasad Paladugu; Michal Simek
> Subject: Re: [PATCH 1/4] sf: params: Add IS25LP032 part support
> 
> Hi Siva,
> 
> On 4 September 2015 at 18:33, Jagan Teki <jteki at openedev.com> wrote:
> > Added support for IS25LP032 flash part.
> >
> > Signed-off-by: Jagan Teki <jteki at openedev.com>
> > Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
> > Cc: Michal Simek <michal.simek at xilinx.com>
> > ---
> 
> Can you test this parts?

I can't test this as these parts are not mounted on any of our boards now, but I can say that 
this won't work straight away and needs another patch I will be sending you soon. 


Regards,
Siva

> 
> >  drivers/mtd/spi/sf_params.c | 3 +++
> >  1 file changed, 3 insertions(+)
> >
> > diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
> > index 4a4a3af..184ba9c 100644
> > --- a/drivers/mtd/spi/sf_params.c
> > +++ b/drivers/mtd/spi/sf_params.c
> > @@ -34,6 +34,9 @@ const struct spi_flash_params
> spi_flash_params_table[] = {
> >         {"GD25Q64B",       0xc84017, 0x0,       64 * 1024,   128, RD_NORM,
> SECT_4K},
> >         {"GD25LQ32",       0xc86016, 0x0,       64 * 1024,    64, RD_NORM,
> SECT_4K},
> >  #endif
> > +#ifdef CONFIG_SPI_FLASH_ISSI           /* ISSI */
> > +       {"IS25LP032",      0x9d6016, 0x0,       64 * 1024,    64, RD_NORM,
> 0},
> > +#endif
> >  #ifdef CONFIG_SPI_FLASH_MACRONIX       /* MACRONIX */
> >         {"MX25L2006E",     0xc22012, 0x0,       64 * 1024,     4, RD_NORM,
> 0},
> >         {"MX25L4005",      0xc22013, 0x0,       64 * 1024,     8, RD_NORM,
> 0},
> > --
> > 1.9.1
> >
> 
> thanks!
> --
> Jagan | openedev.