[U-Boot] [PATCH V2 4/4] arm: mx6: cm-fx6: modify device tree for old revisions of utilite

Nikita Kiryanov nikita at compulab.co.il
Sun Sep 6 10:48:38 CEST 2015


Old revisions of Utilite (a miniature PC based on cm-fx6) do not have
a card detect for mmc, and thus the kernel needs to be told that
there's a persistent storage on usdhc3 to force it to probe the mmc
card.

Check the baseboard revision and modify the device tree accordingly
if needed.

Cc: Stefano Babic <sbabic at denx.de>
Cc: Igor Grinberg <grinberg at compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita at compulab.co.il>
---
Changes in V2:
	- #define USDHC3_PATH instead of const variable usdhc3_path
	- Do not update device tree on eeprom read failures in a more explicit
	  way

 board/compulab/cm_fx6/cm_fx6.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index 572111d..a21e7b0 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -580,9 +580,14 @@ int cm_fx6_setup_ecspi(void) { return 0; }
 #endif
 
 #ifdef CONFIG_OF_BOARD_SETUP
+#define USDHC3_PATH	"/soc/aips-bus at 02100000/usdhc at 02198000/"
 int ft_board_setup(void *blob, bd_t *bd)
 {
+	u32 baseboard_rev;
+	int nodeoffset;
 	uint8_t enetaddr[6];
+	char baseboard_name[16];
+	int err;
 
 	/* MAC addr */
 	if (eth_getenv_enetaddr("ethaddr", enetaddr)) {
@@ -596,6 +601,21 @@ int ft_board_setup(void *blob, bd_t *bd)
 				     enetaddr, 6, 1);
 	}
 
+	baseboard_rev = cl_eeprom_get_board_rev(0);
+	err = cl_eeprom_get_product_name((uchar *)baseboard_name, 0);
+	if (err || baseboard_rev == 0)
+		return 0; /* Assume not an early revision SB-FX6m baseboard */
+
+	if (!strncmp("SB-FX6m", baseboard_name, 7) && baseboard_rev <= 120) {
+		fdt_shrink_to_minimum(blob); /* Make room for new properties */
+		nodeoffset = fdt_path_offset(blob, USDHC3_PATH);
+		fdt_delprop(blob, nodeoffset, "cd-gpios");
+		fdt_find_and_setprop(blob, USDHC3_PATH, "non-removable",
+				     NULL, 0, 1);
+		fdt_find_and_setprop(blob, USDHC3_PATH, "keep-power-in-suspend",
+				     NULL, 0, 1);
+	}
+
 	return 0;
 }
 #endif
-- 
1.9.1



More information about the U-Boot mailing list