[U-Boot] [PATCH v2] arm: socfpga: Fix memory error caused by re-enabling OCRAM ECC

[Jian Luo]

Re-enabling OCRAM ECC can cause some value changes in SRAM. Just
clear fake interrupt status and keep other bits intact.

Signed-off-by: Jian Luo <jian.luo4 at boschrexroth.de>
---
Changes for v2:
	- add CC to custodian

 arch/arm/mach-socfpga/spl.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-socfpga/spl.c
index 775a827..c858406 100644
--- a/arch/arm/mach-socfpga/spl.c
+++ b/arch/arm/mach-socfpga/spl.c
@@ -90,12 +90,14 @@ void board_init_f(ulong dummy)
 	 * and DBE might triggered during power on
 	 */
 	reg = readl(&sysmgr_regs->eccgrp_ocram);
-	if (reg & SYSMGR_ECC_OCRAM_SERR)
-		writel(SYSMGR_ECC_OCRAM_SERR | SYSMGR_ECC_OCRAM_EN,
-		       &sysmgr_regs->eccgrp_ocram);
-	if (reg & SYSMGR_ECC_OCRAM_DERR)
-		writel(SYSMGR_ECC_OCRAM_DERR  | SYSMGR_ECC_OCRAM_EN,
-		       &sysmgr_regs->eccgrp_ocram);
+	if (reg & SYSMGR_ECC_OCRAM_SERR) {
+		reg &= ~SYSMGR_ECC_OCRAM_SERR;
+		writel(reg, &sysmgr_regs->eccgrp_ocram);
+	}
+	if (reg & SYSMGR_ECC_OCRAM_DERR) {
+		reg &= ~SYSMGR_ECC_OCRAM_DERR;
+		writel(reg, &sysmgr_regs->eccgrp_ocram);
+	}
 
 	memset(__bss_start, 0, __bss_end - __bss_start);
 
-- 
1.9.1