[U-Boot] [PATCH 07/14] ARMv8/FSL_LSCH2: Add FSL_LSCH2 SoC
Gong Qianyu
Qianyu.Gong at freescale.com
Fri Sep 11 13:07:21 CEST 2015
From: Mingkai Hu <Mingkai.Hu at freescale.com>
Freescale LayerScape with Chassis Generation 2 is a set of SoCs with
ARMv8 cores and 2rd generation of Chassis.
Signed-off-by: Li Yang <leoli at freescale.com>
Signed-off-by: Hou Zhiqiang <B48286 at freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong at freescale.com>
---
arch/arm/cpu/armv8/Makefile | 1 +
arch/arm/cpu/armv8/fsl-lsch2/Makefile | 12 +
arch/arm/cpu/armv8/fsl-lsch2/README | 10 +
arch/arm/cpu/armv8/fsl-lsch2/cpu.c | 414 ++++++++++++++++++
arch/arm/cpu/armv8/fsl-lsch2/fdt.c | 13 +
arch/arm/cpu/armv8/fsl-lsch2/fsl_lsch2_serdes.c | 116 +++++
arch/arm/cpu/armv8/fsl-lsch2/lowlevel.S | 122 ++++++
arch/arm/cpu/armv8/fsl-lsch2/ls1043a_serdes.c | 86 ++++
arch/arm/cpu/armv8/fsl-lsch2/soc.c | 36 ++
arch/arm/cpu/armv8/fsl-lsch2/speed.c | 137 ++++++
arch/arm/cpu/armv8/fsl-lsch2/speed.h | 7 +
arch/arm/include/asm/arch-fsl-lsch2/clock.h | 24 ++
arch/arm/include/asm/arch-fsl-lsch2/config.h | 148 +++++++
arch/arm/include/asm/arch-fsl-lsch2/fsl_serdes.h | 105 +++++
arch/arm/include/asm/arch-fsl-lsch2/gpio.h | 9 +
arch/arm/include/asm/arch-fsl-lsch2/immap_lsch2.h | 499 ++++++++++++++++++++++
arch/arm/include/asm/arch-fsl-lsch2/imx-regs.h | 52 +++
arch/arm/include/asm/arch-fsl-lsch2/mmu.h | 10 +
arch/arm/include/asm/arch-fsl-lsch2/ns_access.h | 179 ++++++++
arch/arm/include/asm/arch-fsl-lsch2/soc.h | 7 +
arch/arm/include/asm/arch-fsl-lsch2/spl.h | 20 +
arch/arm/include/asm/armv8/mmu.h | 1 +
arch/arm/include/asm/config.h | 3 +
include/common.h | 3 +
24 files changed, 2014 insertions(+)
diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile
index adb11b3..eee8344 100644
--- a/arch/arm/cpu/armv8/Makefile
+++ b/arch/arm/cpu/armv8/Makefile
@@ -15,6 +15,7 @@ obj-y += cache.o
obj-y += tlb.o
obj-y += transition.o
+obj-$(CONFIG_FSL_LSCH2) += fsl-lsch2/
obj-$(CONFIG_FSL_LSCH3) += fsl-lsch3/
obj-$(CONFIG_ARCH_ZYNQMP) += zynqmp/
obj-$(CONFIG_TARGET_HIKEY) += hisilicon/
diff --git a/arch/arm/cpu/armv8/fsl-lsch2/Makefile b/arch/arm/cpu/armv8/fsl-lsch2/Makefile
new file mode 100644
index 0000000..23c5bf9
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch2/Makefile
@@ -0,0 +1,12 @@
+#
+# Copyright 2014, Freescale Semiconductor
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += cpu.o
+obj-y += soc.o
+obj-y += lowlevel.o
+obj-y += speed.o
+obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch2_serdes.o ls1043a_serdes.o
+obj-$(CONFIG_OF_LIBFDT) += fdt.o
diff --git a/arch/arm/cpu/armv8/fsl-lsch2/README b/arch/arm/cpu/armv8/fsl-lsch2/README
new file mode 100644
index 0000000..1e71ad7
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch2/README
@@ -0,0 +1,10 @@
+#
+# Copyright 2014 Freescale Semiconductor
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+Freescale LayerScape with Chassis Generation 2
+
+This architecture supports Freescale ARMv8 SoCs with Chassis generation 2,
+for example LS1043A.
diff --git a/arch/arm/cpu/armv8/fsl-lsch2/cpu.c b/arch/arm/cpu/armv8/fsl-lsch2/cpu.c
new file mode 100644
index 0000000..f81ad83
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch2/cpu.c
@@ -0,0 +1,414 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/armv8/mmu.h>
+#include <asm/io.h>
+#include <asm/arch-fsl-lsch2/immap_lsch2.h>
+#include <asm/arch/fsl_serdes.h>
+#include "speed.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+/*
+ * To start MMU before DDR is available, we create MMU table in SRAM.
+ * The base address of SRAM is CONFIG_SYS_FSL_OCRAM_BASE. We use three
+ * levels of translation tables here to cover 40-bit address space.
+ * We use 4KB granule size, with 40 bits physical address, T0SZ=24
+ * Level 0 IA[39], table address @0
+ * Level 1 IA[31:30], table address @01000, 0x2000
+ * Level 2 IA[29:21], table address @0x3000
+ */
+
+#define SECTION_SHIFT_L0 39UL
+#define SECTION_SHIFT_L1 30UL
+#define SECTION_SHIFT_L2 21UL
+#define BLOCK_SIZE_L0 0x8000000000UL
+#define BLOCK_SIZE_L1 (1 << SECTION_SHIFT_L1)
+#define BLOCK_SIZE_L2 (1 << SECTION_SHIFT_L2)
+#define CONFIG_SYS_IFC_BASE 0x60000000UL
+#define CONFIG_SYS_IFC_SIZE 0x20000000UL
+#define CONFIG_SYS_IFC_BASE2 0x620000000UL
+#define CONFIG_SYS_IFC_SIZE2 0x0e0000000UL
+#define TCR_EL2_PS_40BIT (2 << 16)
+#define LSCH2_VA_BITS (40)
+#define LSCH2_TCR (TCR_TG0_4K | \
+ TCR_EL2_PS_40BIT | \
+ TCR_SHARED_NON | \
+ TCR_ORGN_NC | \
+ TCR_IRGN_NC | \
+ TCR_T0SZ(LSCH2_VA_BITS))
+#define LSCH2_TCR_FINAL (TCR_TG0_4K | \
+ TCR_EL2_PS_40BIT | \
+ TCR_SHARED_OUTER | \
+ TCR_ORGN_WBWA | \
+ TCR_IRGN_WBWA | \
+ TCR_T0SZ(LSCH2_VA_BITS))
+
+/*
+ * Final MMU
+ * Let's start from the same layout as early MMU and modify as needed.
+ * IFC regions will be cache-inhibit.
+ */
+#define FINAL_QBMAN_CACHED_MEM 0x818000000UL
+#define FINAL_QBMAN_CACHED_SIZE 0x4000000
+
+static inline void early_mmu_setup(void)
+{
+ int el;
+ u64 i;
+ u64 section_l1t0, section_l1t1, section_l2;
+ u64 *level0_table = (u64 *)CONFIG_SYS_FSL_OCRAM_BASE;
+ u64 *level1_table_0 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x1000);
+ u64 *level1_table_1 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x2000);
+ u64 *level2_table = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x3000);
+
+
+ level0_table[0] =
+ (u64)level1_table_0 | PMD_TYPE_TABLE;
+ level0_table[1] =
+ (u64)level1_table_1 | PMD_TYPE_TABLE;
+
+ /*
+ * set level 1 table 0 to cache_inhibit, covering 0 to 512GB
+ * set level 1 table 1 to cache enabled, covering 512GB to 1TB
+ * set level 2 table to cache-inhibit, covering 0 to 1GB
+ */
+ section_l1t0 = 0;
+ section_l1t1 = BLOCK_SIZE_L0;
+ section_l2 = 0;
+ for (i = 0; i < 512; i++) {
+ set_pgtable_section(level1_table_0, i, section_l1t0,
+ MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE);
+ set_pgtable_section(level1_table_1, i, section_l1t1,
+ MT_NORMAL, PMD_SECT_NON_SHARE);
+ set_pgtable_section(level2_table, i, section_l2,
+ MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE);
+ section_l1t0 += BLOCK_SIZE_L1;
+ section_l1t1 += BLOCK_SIZE_L1;
+ section_l2 += BLOCK_SIZE_L2;
+ }
+
+ level1_table_0[0] =
+ (u64)level2_table | PMD_TYPE_TABLE;
+ level1_table_0[1] =
+ 0x40000000 | PMD_SECT_AF | PMD_TYPE_SECT |
+ PMD_ATTRINDX(MT_DEVICE_NGNRNE);
+ level1_table_0[2] =
+ 0x80000000 | PMD_SECT_AF | PMD_TYPE_SECT |
+ PMD_ATTRINDX(MT_NORMAL);
+ level1_table_0[3] =
+ 0xc0000000 | PMD_SECT_AF | PMD_TYPE_SECT |
+ PMD_ATTRINDX(MT_NORMAL);
+
+ /* Rewrite table to enable cache */
+ set_pgtable_section(level2_table,
+ CONFIG_SYS_FSL_OCRAM_BASE >> SECTION_SHIFT_L2,
+ CONFIG_SYS_FSL_OCRAM_BASE,
+ MT_NORMAL,
+ PMD_SECT_NON_SHARE);
+ for (i = CONFIG_SYS_IFC_BASE >> SECTION_SHIFT_L2;
+ i < (CONFIG_SYS_IFC_BASE + CONFIG_SYS_IFC_SIZE)
+ >> SECTION_SHIFT_L2; i++) {
+ section_l2 = i << SECTION_SHIFT_L2;
+ set_pgtable_section(level2_table, i,
+ section_l2, MT_NORMAL,
+ PMD_SECT_NON_SHARE);
+ }
+
+ el = current_el();
+ set_ttbr_tcr_mair(el, (u64)level0_table, LSCH2_TCR, MEMORY_ATTRIBUTES);
+ set_sctlr(get_sctlr() | CR_M);
+}
+
+static inline void final_mmu_setup(void)
+{
+ int el;
+ u64 i, tbl_base, tbl_limit, section_base;
+ u64 section_l1t0, section_l1t1, section_l2;
+ u64 *level0_table = (u64 *)gd->arch.tlb_addr;
+ u64 *level1_table_0 = (u64 *)(gd->arch.tlb_addr + 0x1000);
+ u64 *level1_table_1 = (u64 *)(gd->arch.tlb_addr + 0x2000);
+ u64 *level2_table_0 = (u64 *)(gd->arch.tlb_addr + 0x3000);
+ u64 *level2_table_1 = (u64 *)(gd->arch.tlb_addr + 0x4000);
+
+
+ level0_table[0] =
+ (u64)level1_table_0 | PMD_TYPE_TABLE;
+ level0_table[1] =
+ (u64)level1_table_1 | PMD_TYPE_TABLE;
+
+ /*
+ * set level 1 table 0 to cache_inhibit, covering 0 to 512GB
+ * set level 1 table 1 to cache enabled, covering 512GB to 1TB
+ * set level 2 table 0 to cache-inhibit, covering 0 to 1GB
+ */
+ section_l1t0 = 0;
+ section_l1t1 = BLOCK_SIZE_L0 | PMD_SECT_OUTER_SHARE;
+ section_l2 = 0;
+ for (i = 0; i < 512; i++) {
+ set_pgtable_section(level1_table_0, i, section_l1t0,
+ MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE);
+ set_pgtable_section(level1_table_1, i, section_l1t1,
+ MT_NORMAL, PMD_SECT_NON_SHARE);
+ set_pgtable_section(level2_table_0, i, section_l2,
+ MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE);
+ section_l1t0 += BLOCK_SIZE_L1;
+ section_l1t1 += BLOCK_SIZE_L1;
+ section_l2 += BLOCK_SIZE_L2;
+ }
+
+ level1_table_0[0] =
+ (u64)level2_table_0 | PMD_TYPE_TABLE;
+ level1_table_0[2] =
+ 0x80000000 | PMD_SECT_AF | PMD_TYPE_SECT |
+ PMD_SECT_OUTER_SHARE | PMD_SECT_NS | PMD_ATTRINDX(MT_NORMAL);
+ level1_table_0[3] =
+ 0xc0000000 | PMD_SECT_AF | PMD_TYPE_SECT |
+ PMD_SECT_OUTER_SHARE | PMD_SECT_NS | PMD_ATTRINDX(MT_NORMAL);
+
+ /* Rewrite table to enable cache */
+ set_pgtable_section(level2_table_0,
+ CONFIG_SYS_FSL_OCRAM_BASE >> SECTION_SHIFT_L2,
+ CONFIG_SYS_FSL_OCRAM_BASE,
+ MT_NORMAL,
+ PMD_SECT_NON_SHARE);
+
+ /*
+ * Fill in other part of tables if cache is needed
+ * If finer granularity than 1GB is needed, sub table
+ * should be created.
+ */
+ section_base = FINAL_QBMAN_CACHED_MEM & ~(BLOCK_SIZE_L1 - 1);
+ i = section_base >> SECTION_SHIFT_L1;
+ level1_table_0[i] = (u64)level2_table_1 | PMD_TYPE_TABLE;
+ section_l2 = section_base;
+ for (i = 0; i < 512; i++) {
+ set_pgtable_section(level2_table_1, i, section_l2,
+ MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE);
+ section_l2 += BLOCK_SIZE_L2;
+ }
+ tbl_base = FINAL_QBMAN_CACHED_MEM & (BLOCK_SIZE_L1 - 1);
+ tbl_limit = (FINAL_QBMAN_CACHED_MEM + FINAL_QBMAN_CACHED_SIZE) &
+ (BLOCK_SIZE_L1 - 1);
+ for (i = tbl_base >> SECTION_SHIFT_L2;
+ i < tbl_limit >> SECTION_SHIFT_L2; i++) {
+ section_l2 = section_base + (i << SECTION_SHIFT_L2);
+ set_pgtable_section(level2_table_1, i,
+ section_l2, MT_NORMAL, PMD_SECT_NON_SHARE);
+ }
+
+ /* flush new MMU table */
+ flush_dcache_range(gd->arch.tlb_addr,
+ gd->arch.tlb_addr + gd->arch.tlb_size);
+ flush_dcache_all();
+
+ el = current_el();
+ set_ttbr_tcr_mair(el, (u64)level0_table, LSCH2_TCR_FINAL,
+ MEMORY_ATTRIBUTES);
+
+ /*
+ * MMU is already enabled, just need to invalidate TLB to load the
+ * new table. The new table is compatible with the current table, if
+ * MMU somehow walks through the new table before invalidation TLB,
+ * it still works. So we don't need to turn off MMU here.
+ */
+}
+
+int arch_cpu_init(void)
+{
+ icache_enable();
+ __asm_invalidate_dcache_all();
+ __asm_invalidate_tlb_all();
+ early_mmu_setup();
+ set_sctlr(get_sctlr() | CR_C);
+ return 0;
+}
+
+/*
+ * This function is called from lib/board.c.
+ * It recreates MMU table in main memory. MMU and d-cache are enabled earlier.
+ * There is no need to disable d-cache for this operation.
+ */
+void enable_caches(void)
+{
+ final_mmu_setup();
+ __asm_invalidate_tlb_all();
+}
+#endif
+
+
+static inline u32 initiator_type(u32 cluster, int init_id)
+{
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
+ u32 type = in_be32(&gur->tp_ityp[idx]);
+
+ if (type & TP_ITYP_AV)
+ return type;
+
+ return 0;
+}
+
+u32 cpu_mask(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ int i = 0, count = 0;
+ u32 cluster, type, mask = 0;
+
+ do {
+ int j;
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ type = initiator_type(cluster, j);
+ if (type) {
+ if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
+ mask |= 1 << count;
+ count++;
+ }
+ }
+ i++;
+ } while ((cluster & TP_CLUSTER_EOC_MASK) == 0x0);
+
+ return mask;
+}
+
+/*
+ * Return the number of cores on this SOC.
+ */
+int cpu_numcores(void)
+{
+ return hweight32(cpu_mask());
+}
+
+int fsl_qoriq_core_to_cluster(unsigned int core)
+{
+ struct ccsr_gur __iomem *gur =
+ (void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ int i = 0, count = 0;
+ u32 cluster;
+
+ do {
+ int j;
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ if (initiator_type(cluster, j)) {
+ if (count == core)
+ return i;
+ count++;
+ }
+ }
+ i++;
+ } while ((cluster & TP_CLUSTER_EOC_MASK) == 0x0);
+
+ return -1; /* cannot identify the cluster */
+}
+
+u32 fsl_qoriq_core_to_type(unsigned int core)
+{
+ struct ccsr_gur __iomem *gur =
+ (void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ int i = 0, count = 0;
+ u32 cluster, type;
+
+ do {
+ int j;
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ type = initiator_type(cluster, j);
+ if (type) {
+ if (count == core)
+ return type;
+ count++;
+ }
+ }
+ i++;
+ } while ((cluster & TP_CLUSTER_EOC_MASK) == 0x0);
+
+ return -1; /* cannot identify the cluster */
+}
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ struct sys_info sysinfo;
+ char buf[32];
+ unsigned int i, core;
+ u32 type;
+
+ get_sys_info(&sysinfo);
+ puts("Clock Configuration:");
+ for_each_cpu(i, core, cpu_numcores(), cpu_mask()) {
+ if (!(i % 3))
+ puts("\n ");
+ type = TP_ITYP_VER(fsl_qoriq_core_to_type(core));
+ printf("CPU%d(%s):%-4s MHz ", core,
+ type == TY_ITYP_VER_A7 ? "A7 " :
+ (type == TY_ITYP_VER_A53 ? "A53" :
+ (type == TY_ITYP_VER_A57 ? "A57" : " ")),
+ strmhz(buf, sysinfo.freq_processor[core]));
+ }
+ printf("\n Bus: %-4s MHz ",
+ strmhz(buf, sysinfo.freq_systembus));
+ printf("DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus));
+ puts("\n");
+
+ /*
+ * Display the RCW, so that no one gets confused as to what RCW
+ * we're actually using for this boot.
+ */
+ puts("Reset Configuration Word (RCW):");
+ for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+ u32 rcw = in_be32(&gur->rcwsr[i]);
+
+ if ((i % 4) == 0)
+ printf("\n %08x:", i * 4);
+ printf(" %08x", rcw);
+ }
+ puts("\n");
+
+ return 0;
+}
+#endif
+
+int arch_early_init_r(void)
+{
+#ifdef CONFIG_SYS_HAS_SERDES
+ fsl_serdes_init();
+#endif
+ return 0;
+}
+
+int timer_init(void)
+{
+ u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
+#ifdef COUNTER_FREQUENCY_REAL
+ unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
+
+ /* Update with accurate clock frequency */
+ asm volatile("msr cntfrq_el0, %0" : : "r" (cntfrq) : "memory");
+#endif
+
+ /* Enable clock for timer. This is a global setting. */
+ out_le32(cntcr, 0x1);
+
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+ u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
+ u32 val;
+
+ /* Raise RESET_REQ_B */
+ val = in_le32(rstcr);
+ val |= 0x02;
+ out_be32(rstcr, val);
+}
diff --git a/arch/arm/cpu/armv8/fsl-lsch2/fdt.c b/arch/arm/cpu/armv8/fsl-lsch2/fdt.c
new file mode 100644
index 0000000..b4af812
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch2/fdt.c
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+}
diff --git a/arch/arm/cpu/armv8/fsl-lsch2/fsl_lsch2_serdes.c b/arch/arm/cpu/armv8/fsl-lsch2/fsl_lsch2_serdes.c
new file mode 100644
index 0000000..4832e92
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch2/fsl_lsch2_serdes.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch-fsl-lsch2/immap_lsch2.h>
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
+#endif
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+ int ret = 0;
+
+#ifdef CONFIG_SYS_FSL_SRDS_1
+ ret |= serdes1_prtcl_map[device];
+#endif
+
+ return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 cfg = in_be32(&gur->rcwsr[4]);
+ int i;
+
+ switch (sd) {
+#ifdef CONFIG_SYS_FSL_SRDS_1
+ case FSL_SRDS_1:
+ cfg &= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+ cfg >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+ break;
+#endif
+ default:
+ printf("invalid SerDes%d\n", sd);
+ break;
+ }
+
+ /* Is serdes enabled at all? */
+ if (unlikely(cfg == 0))
+ return -ENODEV;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_get_prtcl(sd, cfg, i) == device)
+ return i;
+ }
+
+ return -ENODEV;
+}
+
+int get_serdes_protocol(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 cfg = in_be32(&gur->rcwsr[4]) &
+ FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
+ cfg >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+ return cfg;
+}
+
+const char *serdes_clock_to_string(u32 clock)
+{
+ switch (clock) {
+ case SRDS_PLLCR0_RFCK_SEL_100:
+ return "100";
+ case SRDS_PLLCR0_RFCK_SEL_125:
+ return "125";
+ case SRDS_PLLCR0_RFCK_SEL_156_25:
+ return "156.25";
+ default:
+ return "100";
+ }
+}
+
+void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
+ u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 cfg;
+ int lane;
+
+ memset(serdes_prtcl_map, 0, sizeof(serdes_prtcl_map));
+
+ cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask;
+ cfg >>= sd_prctl_shift;
+ printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
+
+ if (!is_serdes_prtcl_valid(sd, cfg))
+ printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+ for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+ if (unlikely(lane_prtcl >= SERDES_PRCTL_COUNT))
+ debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
+ else
+ serdes_prtcl_map[lane_prtcl] = 1;
+ }
+}
+
+void fsl_serdes_init(void)
+{
+#ifdef CONFIG_SYS_FSL_SRDS_1
+ serdes_init(FSL_SRDS_1,
+ CONFIG_SYS_FSL_SERDES_ADDR,
+ FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK,
+ FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT,
+ serdes1_prtcl_map);
+#endif
+}
diff --git a/arch/arm/cpu/armv8/fsl-lsch2/lowlevel.S b/arch/arm/cpu/armv8/fsl-lsch2/lowlevel.S
new file mode 100644
index 0000000..4329bf5
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch2/lowlevel.S
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Extracted from armv8/start.S
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/gic.h>
+#include <asm/macro.h>
+
+ENTRY(lowlevel_init)
+ mov x29, lr /* Save LR */
+
+ /* Set the SMMU page size in the sACR register */
+ ldr x1, =SMMU_BASE
+ ldr w0, [x1, #0x10]
+ orr w0, w0, #1 << 16 /* set sACR.pagesize to indicate 64K page */
+ str w0, [x1, #0x10]
+
+ /* Initialize GIC Secure Bank Status */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+ branch_if_slave x0, 1f
+ ldr x0, =GICD_BASE
+ bl gic_init_secure
+1:
+#ifdef CONFIG_GICV3
+ ldr x0, =GICR_BASE
+ bl gic_init_secure_percpu
+#elif defined(CONFIG_GICV2)
+ ldr x0, =GICD_BASE
+ ldr x1, =GICC_BASE
+ bl gic_init_secure_percpu
+#endif
+#endif
+
+ branch_if_master x0, x1, 1f
+
+ /*
+ * Slave should wait for master clearing spin table.
+ * This sync prevent salves observing incorrect
+ * value of spin table and jumping to wrong place.
+ */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+#ifdef CONFIG_GICV2
+ ldr x0, =GICC_BASE
+#endif
+ bl gic_wait_for_interrupt
+#endif
+
+ /*
+ * All processors will enter EL2 and optionally EL1.
+ */
+ bl armv8_switch_to_el2
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+ bl armv8_switch_to_el1
+#endif
+ b 2f
+
+1:
+ /* Set Non Secure access for all devices protected via TZPC */
+ ldr x1, =TZPCDECPROT_0_SET_BASE /* Decode Protection-0 Set Reg */
+ mov w0, #0xFF /* Set decode region to NS, Bits[7:0] */
+ str w0, [x1]
+
+ ldr x1, =TZPCDECPROT_1_SET_BASE /* Decode Protection-1 Set Reg */
+ mov w0, #0xFF /* Set decode region to NS, Bits[7:0] */
+ str w0, [x1]
+
+ ldr x1, =TZPCDECPROT_2_SET_BASE /* Decode Protection-2 Set Reg */
+ mov w0, #0xFF /* Set decode region to NS, Bits[7:0] */
+ str w0, [x1]
+
+ /* Entire SRAM as NS */
+ ldr x1, =TZPCR0SIZE_BASE /* Secure RAM region size Reg */
+ mov w0, #0x00000000 /* 0x00000000 = no secure region */
+ str w0, [x1]
+
+ /* Set TZASC so that:
+ * a. We use only Region0 whose global secure write/read is EN
+ * b. We use only Region0 whose NSAID write/read is EN
+ *
+ * NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just
+ * placeholders.
+ */
+ ldr x1, =TZASC_GATE_KEEPER(0)
+ ldr x0, [x1] /* Filter 0 Gate Keeper Register */
+ orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */
+ str x0, [x1]
+
+ ldr x1, =TZASC_GATE_KEEPER(1)
+ ldr x0, [x1] /* Filter 0 Gate Keeper Register */
+ orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */
+ str x0, [x1]
+
+ ldr x1, =TZASC_REGION_ATTRIBUTES_0(0)
+ ldr x0, [x1] /* Region-0 Attributes Register */
+ orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */
+ orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */
+ str x0, [x1]
+
+ ldr x1, =TZASC_REGION_ATTRIBUTES_0(1)
+ ldr x0, [x1] /* Region-1 Attributes Register */
+ orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */
+ orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */
+ str x0, [x1]
+
+ ldr x1, =TZASC_REGION_ID_ACCESS_0(0)
+ ldr w0, [x1] /* Region-0 Access Register */
+ mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
+ str w0, [x1]
+
+ ldr x1, =TZASC_REGION_ID_ACCESS_0(1)
+ ldr w0, [x1] /* Region-1 Attributes Register */
+ mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */
+ str w0, [x1]
+2:
+ mov lr, x29 /* Restore LR */
+ ret
+ENDPROC(lowlevel_init)
diff --git a/arch/arm/cpu/armv8/fsl-lsch2/ls1043a_serdes.c b/arch/arm/cpu/armv8/fsl-lsch2/ls1043a_serdes.c
new file mode 100644
index 0000000..818285f
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch2/ls1043a_serdes.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch-fsl-lsch2/immap_lsch2.h>
+
+struct serdes_config {
+ u32 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {0x1555, {XFI_FM1_MAC9, PCIE1, PCIE2, PCIE3} },
+ {0x2555, {SGMII_2500_FM1_DTSEC9, PCIE1, PCIE2, PCIE3} },
+ {0x4555, {QSGMII_FM1_A, PCIE1, PCIE2, PCIE3} },
+ {0x4558, {QSGMII_FM1_A, PCIE1, PCIE2, SATA1} },
+ {0x1355, {XFI_FM1_MAC9, SGMII_FM1_DTSEC2, PCIE2, PCIE3} },
+ {0x2355, {SGMII_2500_FM1_DTSEC9, SGMII_FM1_DTSEC2, PCIE2, PCIE3} },
+ {0x3335, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC5,
+ PCIE3} },
+ {0x3355, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, PCIE2, PCIE3} },
+ {0x3358, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, PCIE2, SATA1} },
+ {0x3555, {SGMII_FM1_DTSEC9, PCIE1, PCIE2, PCIE3} },
+ {0x3558, {SGMII_FM1_DTSEC9, PCIE1, PCIE2, SATA1} },
+ {0x7000, {PCIE1, PCIE1, PCIE1, PCIE1} },
+ {0x9998, {PCIE1, PCIE2, PCIE3, SATA1} },
+ {0x6058, {PCIE1, PCIE1, PCIE2, SATA1} },
+ {0x1455, {XFI_FM1_MAC9, QSGMII_FM1_A, PCIE2, PCIE3} },
+ {0x2455, {SGMII_2500_FM1_DTSEC9, QSGMII_FM1_A, PCIE2, PCIE3} },
+ {0x2255, {SGMII_2500_FM1_DTSEC9, SGMII_2500_FM1_DTSEC2, PCIE2, PCIE3} },
+ {0x3333, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC5,
+ SGMII_FM1_DTSEC6} },
+ {}
+};
+
+static struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv8/fsl-lsch2/soc.c b/arch/arm/cpu/armv8/fsl-lsch2/soc.c
new file mode 100644
index 0000000..8f010ae
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch2/soc.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_ifc.h>
+#include <asm/arch-fsl-lsch2/soc.h>
+#include <asm/io.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void fsl_lsch2_early_init_f(void)
+{
+ struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+
+#ifdef CONFIG_FSL_IFC
+ init_early_memctl_regs(); /* tighten IFC timing */
+#endif
+
+ /*
+ * Enable snoop requests and DVM message requests for
+ * Slave insterface S4 (A53 core cluster)
+ */
+ out_le32(&cci->slave[4].snoop_ctrl,
+ CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ return 0;
+}
+#endif
diff --git a/arch/arm/cpu/armv8/fsl-lsch2/speed.c b/arch/arm/cpu/armv8/fsl-lsch2/speed.c
new file mode 100644
index 0000000..2912d67
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch2/speed.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/compiler.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/arch-fsl-lsch2/immap_lsch2.h>
+#include <asm/arch/clock.h>
+#include <fsl_ifc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
+#endif
+
+void get_sys_info(struct sys_info *sys_info)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+#ifdef CONFIG_FSL_IFC
+ struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL};
+ u32 ccr;
+#endif
+ struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_CLK_ADDR);
+ unsigned int cpu;
+ const u8 core_cplx_pll[8] = {
+ [0] = 0, /* CC1 PPL / 1 */
+ [1] = 0, /* CC1 PPL / 2 */
+ [4] = 1, /* CC2 PPL / 1 */
+ [5] = 1, /* CC2 PPL / 2 */
+ };
+
+ const u8 core_cplx_pll_div[8] = {
+ [0] = 1, /* CC1 PPL / 1 */
+ [1] = 2, /* CC1 PPL / 2 */
+ [4] = 1, /* CC2 PPL / 1 */
+ [5] = 2, /* CC2 PPL / 2 */
+ };
+
+ uint i;
+ uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
+ uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
+ unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+
+ sys_info->freq_systembus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+ sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#else
+ sys_info->freq_ddrbus = sysclk;
+#endif
+
+ sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >>
+ FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT) &
+ FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK;
+ sys_info->freq_ddrbus *= (in_be32(&gur->rcwsr[0]) >>
+ FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT) &
+ FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK;
+
+ for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
+ ratio[i] = (in_be32(&clk->pllcgsr[i].pllcngsr) >> 1) & 0xff;
+ if (ratio[i] > 4)
+ freq_c_pll[i] = sysclk * ratio[i];
+ else
+ freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
+ }
+
+ for (cpu = 0; cpu < CONFIG_MAX_CPUS; cpu++) {
+ u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
+ & 0xf;
+ u32 cplx_pll = core_cplx_pll[c_pll_sel];
+
+ sys_info->freq_processor[cpu] =
+ freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
+ }
+
+#define HWA_CGA_M1_CLK_SEL 0xe0000000
+#define HWA_CGA_M1_CLK_SHIFT 29
+
+#define HWA_CGA_M2_CLK_SEL 0x00000007
+#define HWA_CGA_M2_CLK_SHIFT 0
+
+#if defined(CONFIG_FSL_IFC)
+ ccr = in_le32(&ifc_regs.gregs->ifc_ccr);
+ ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
+
+ sys_info->freq_localbus = sys_info->freq_systembus / ccr;
+#endif
+}
+
+int get_clocks(void)
+{
+ struct sys_info sys_info;
+
+ get_sys_info(&sys_info);
+ gd->cpu_clk = sys_info.freq_processor[0];
+ gd->bus_clk = sys_info.freq_systembus;
+ gd->mem_clk = sys_info.freq_ddrbus;
+
+ if (gd->cpu_clk != 0)
+ return 0;
+ else
+ return 1;
+}
+
+ulong get_bus_freq(ulong dummy)
+{
+ return gd->bus_clk;
+}
+
+ulong get_ddr_freq(ulong dummy)
+{
+ return gd->mem_clk;
+}
+
+int get_serial_clock(void)
+{
+ return gd->bus_clk;
+}
+
+unsigned int mxc_get_clock(enum mxc_clock clk)
+{
+ switch (clk) {
+ case MXC_I2C_CLK:
+ return get_bus_freq(0);
+ case MXC_DSPI_CLK:
+ return get_bus_freq(0);
+ case MXC_UART_CLK:
+ return get_bus_freq(0);
+ default:
+ printf("Unsupported clock\n");
+ }
+ return 0;
+}
diff --git a/arch/arm/cpu/armv8/fsl-lsch2/speed.h b/arch/arm/cpu/armv8/fsl-lsch2/speed.h
new file mode 100644
index 0000000..15af5b9
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-lsch2/speed.h
@@ -0,0 +1,7 @@
+/*
+ * Copyright 2014, Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+void get_sys_info(struct sys_info *sys_info);
diff --git a/arch/arm/include/asm/arch-fsl-lsch2/clock.h b/arch/arm/include/asm/arch-fsl-lsch2/clock.h
new file mode 100644
index 0000000..9aaf87c
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch2/clock.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_FSL_LSCH2_CLOCK_H_
+#define __ASM_ARCH_FSL_LSCH2_CLOCK_H_
+
+#include <common.h>
+
+enum mxc_clock {
+ MXC_ARM_CLK = 0,
+ MXC_BUS_CLK,
+ MXC_UART_CLK,
+ MXC_ESDHC_CLK,
+ MXC_I2C_CLK,
+ MXC_DSPI_CLK,
+};
+
+unsigned int mxc_get_clock(enum mxc_clock clk);
+
+#endif /* __ASM_ARCH_FSL_LSCH2_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-fsl-lsch2/config.h b/arch/arm/include/asm/arch-fsl-lsch2/config.h
new file mode 100644
index 0000000..2125161
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch2/config.h
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2014, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV8_FSL_LSCH2_CONFIG_
+#define _ASM_ARMV8_FSL_LSCH2_CONFIG_
+
+#define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */
+
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+/* Link Definitions */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+
+#define CONFIG_SYS_IMMR 0x01000000
+
+#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
+#define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000)
+#define CONFIG_SYS_GIC400_ADDR (CONFIG_SYS_IMMR + 0x00400000)
+#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000)
+#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
+#define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000)
+#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
+#define CONFIG_SYS_FSL_RST_ADDR (CONFIG_SYS_IMMR + 0x00ee00b0)
+#define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000)
+#define CONFIG_SYS_FSL_FMAN_ADDR (CONFIG_SYS_IMMR + 0x00a00000)
+#define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000)
+#define CONFIG_SYS_FSL_DCFG_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
+#define CONFIG_SYS_FSL_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000)
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011c0600)
+#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_IMMR + 0x011d0500)
+#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_IMMR + 0x011d0600)
+#define CONFIG_SYS_FSL_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x01f00000)
+#define CONFIG_SYS_FSL_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02000000)
+#define CONFIG_SYS_FSL_XHCI_USB3_ADDR (CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)
+#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000)
+#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR + 0x2600000)
+#define CONFIG_SYS_FSL_SEC_ADDR (CONFIG_SYS_IMMR + 0x700000)
+#define CONFIG_SYS_FSL_JR0_ADDR (CONFIG_SYS_IMMR + 0x710000)
+#define CONFIG_SYS_SNVS_ADDR (CONFIG_SYS_IMMR + 0xe90000)
+#define CONFIG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0xe80200)
+
+#define CONFIG_SYS_FSL_TIMER_ADDR 0x02b00000
+
+#define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01180000)
+#define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01190000)
+#define I2C3_BASE_ADDR (CONFIG_SYS_IMMR + 0x011a0000)
+#define I2C4_BASE_ADDR (CONFIG_SYS_IMMR + 0x011b0000)
+
+#define WDOG1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01ad0000)
+
+#define QSPI0_BASE_ADDR (CONFIG_SYS_IMMR + 0x00550000)
+#define DSPI1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01100000)
+
+#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
+
+#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000)
+
+#define CONFIG_SYS_PCIE1_PHYS_ADDR 0x4000000000ULL
+#define CONFIG_SYS_PCIE2_PHYS_ADDR 0x4800000000ULL
+#define CONFIG_SYS_PCIE3_PHYS_ADDR 0x5000000000ULL
+
+/* SMMU Defintions */
+#define SMMU_BASE 0x09000000
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE 0x01401000
+#define GICC_BASE 0x01402000
+
+/* TZ Protection Controller Definitions */
+#define TZPC_BASE 0x02200000
+#define TZPCR0SIZE_BASE (TZPC_BASE)
+#define TZPCDECPROT_0_STAT_BASE (TZPC_BASE + 0x800)
+#define TZPCDECPROT_0_SET_BASE (TZPC_BASE + 0x804)
+#define TZPCDECPROT_0_CLR_BASE (TZPC_BASE + 0x808)
+#define TZPCDECPROT_1_STAT_BASE (TZPC_BASE + 0x80C)
+#define TZPCDECPROT_1_SET_BASE (TZPC_BASE + 0x810)
+#define TZPCDECPROT_1_CLR_BASE (TZPC_BASE + 0x814)
+#define TZPCDECPROT_2_STAT_BASE (TZPC_BASE + 0x818)
+#define TZPCDECPROT_2_SET_BASE (TZPC_BASE + 0x81C)
+#define TZPCDECPROT_2_CLR_BASE (TZPC_BASE + 0x820)
+
+/* TZ Address Space Controller Definitions */
+#define TZASC1_BASE 0x01100000 /* as per CCSR map. */
+#define TZASC2_BASE 0x01110000 /* as per CCSR map. */
+#define TZASC3_BASE 0x01120000 /* as per CCSR map. */
+#define TZASC4_BASE 0x01130000 /* as per CCSR map. */
+#define TZASC_BUILD_CONFIG_REG(x) ((TZASC1_BASE + (x * 0x10000)))
+#define TZASC_ACTION_REG(x) ((TZASC1_BASE + (x * 0x10000)) + 0x004)
+#define TZASC_GATE_KEEPER(x) ((TZASC1_BASE + (x * 0x10000)) + 0x008)
+#define TZASC_REGION_BASE_LOW_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x100)
+#define TZASC_REGION_BASE_HIGH_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x104)
+#define TZASC_REGION_TOP_LOW_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x108)
+#define TZASC_REGION_TOP_HIGH_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x10C)
+#define TZASC_REGION_ATTRIBUTES_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x110)
+#define TZASC_REGION_ID_ACCESS_0(x) ((TZASC1_BASE + (x * 0x10000)) + 0x114)
+
+#define CONFIG_SYS_FSL_DDR_BE
+#define CONFIG_VERY_BIG_RAM
+#ifdef CONFIG_SYS_FSL_DDR4
+#define CONFIG_SYS_FSL_DDRC_GEN4
+#else
+#define CONFIG_SYS_FSL_DDRC_ARM_GEN3 /* Enable Freescale ARM DDR3 driver */
+#endif
+#define CONFIG_SYS_FSL_DDR /* Freescale DDR driver */
+#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30)
+#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE
+
+#define CONFIG_SYS_FSL_IFC_BE
+#define CONFIG_SYS_FSL_ESDHC_BE
+#define CONFIG_SYS_FSL_WDOG_BE
+#define CONFIG_SYS_FSL_DSPI_BE
+#define CONFIG_SYS_FSL_QSPI_BE
+
+#define QE_MURAM_SIZE 0x6000UL
+#define MAX_QE_RISC 1
+#define QE_NUM_OF_SNUM 28
+
+#define CONFIG_SYS_FSL_SRDS_1
+#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
+
+#ifdef CONFIG_LS1043A
+#define CONFIG_MAX_CPUS 4
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_NUM_FMAN 1
+#define CONFIG_SYS_NUM_FM1_DTSEC 7
+#define CONFIG_SYS_NUM_FM1_10GEC 1
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0x01000000
+#define CONFIG_SYS_FSL_SEC_COMPAT 5
+#else
+#error SoC not defined
+#endif
+
+#define CONFIG_SYS_FSL_SFP_VER_3_2
+#define CONFIG_SYS_FSL_SNVS_LE
+#define CONFIG_SYS_FSL_SEC_LE
+#define CONFIG_SYS_FSL_SFP_BE
+#define CONFIG_SYS_FSL_SRK_LE
+#define CONFIG_KEY_REVOCATION
+
+#endif /* _ASM_ARMV8_FSL_LSCH2_CONFIG_ */
diff --git a/arch/arm/include/asm/arch-fsl-lsch2/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-lsch2/fsl_serdes.h
new file mode 100644
index 0000000..d4478db
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch2/fsl_serdes.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_SERDES_H__
+#define __FSL_SERDES_H__
+
+#include <config.h>
+
+enum srds_prtcl {
+ NONE = 0,
+ PCIE1,
+ PCIE2,
+ PCIE3,
+ PCIE4,
+ SATA1,
+ SATA2,
+ SRIO1,
+ SRIO2,
+ SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4,
+ SGMII_FM1_DTSEC5,
+ SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC10,
+ SGMII_FM2_DTSEC1,
+ SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3,
+ SGMII_FM2_DTSEC4,
+ SGMII_FM2_DTSEC5,
+ SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC10,
+ SGMII_TSEC1,
+ SGMII_TSEC2,
+ SGMII_TSEC3,
+ SGMII_TSEC4,
+ XAUI_FM1,
+ XAUI_FM2,
+ AURORA,
+ CPRI1,
+ CPRI2,
+ CPRI3,
+ CPRI4,
+ CPRI5,
+ CPRI6,
+ CPRI7,
+ CPRI8,
+ XAUI_FM1_MAC9,
+ XAUI_FM1_MAC10,
+ XAUI_FM2_MAC9,
+ XAUI_FM2_MAC10,
+ HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10,
+ HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10,
+ QSGMII_FM1_A, /* A indicates MACs 1,2,5,6 */
+ QSGMII_FM1_B, /* B indicates MACs 5,6,9,10 */
+ QSGMII_FM2_A,
+ QSGMII_FM2_B,
+ XFI_FM1_MAC1,
+ XFI_FM1_MAC2,
+ XFI_FM1_MAC9,
+ XFI_FM1_MAC10,
+ XFI_FM2_MAC9,
+ XFI_FM2_MAC10,
+ INTERLAKEN,
+ QSGMII_SW1_A, /* Indicates ports on L2 Switch */
+ QSGMII_SW1_B,
+ SGMII_2500_FM1_DTSEC1,
+ SGMII_2500_FM1_DTSEC2,
+ SGMII_2500_FM1_DTSEC3,
+ SGMII_2500_FM1_DTSEC4,
+ SGMII_2500_FM1_DTSEC5,
+ SGMII_2500_FM1_DTSEC6,
+ SGMII_2500_FM1_DTSEC9,
+ SGMII_2500_FM1_DTSEC10,
+ SGMII_2500_FM2_DTSEC1,
+ SGMII_2500_FM2_DTSEC2,
+ SGMII_2500_FM2_DTSEC3,
+ SGMII_2500_FM2_DTSEC4,
+ SGMII_2500_FM2_DTSEC5,
+ SGMII_2500_FM2_DTSEC6,
+ SGMII_2500_FM2_DTSEC9,
+ SGMII_2500_FM2_DTSEC10,
+ SERDES_PRCTL_COUNT
+};
+
+enum srds {
+ FSL_SRDS_1 = 0,
+};
+
+int is_serdes_configured(enum srds_prtcl device);
+void fsl_serdes_init(void);
+const char *serdes_clock_to_string(u32 clock);
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int get_serdes_protocol(void);
+
+#endif /* __FSL_SERDES_H__ */
diff --git a/arch/arm/include/asm/arch-fsl-lsch2/gpio.h b/arch/arm/include/asm/arch-fsl-lsch2/gpio.h
new file mode 100644
index 0000000..ff03e5a
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch2/gpio.h
@@ -0,0 +1,9 @@
+/*
+ * (C) Copyright 2014, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV8_FSL_LSCH2_GPIO_H_
+#define _ASM_ARMV8_FSL_LSCH2_GPIO_H_
+#endif /* _ASM_ARMV8_FSL_LSCH2_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-fsl-lsch2/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-lsch2/immap_lsch2.h
new file mode 100644
index 0000000..3f8ce0e
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch2/immap_lsch2.h
@@ -0,0 +1,499 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ARCH_FSL_LSCH2_IMMAP_H__
+#define __ARCH_FSL_LSCH2_IMMAP_H__
+
+#include <fsl_immap.h>
+
+#define IS_E_PROCESSOR(svr) (!(svr & 0x100))
+
+#define TP_ITYP_AV 0x00000001 /* Initiator available */
+#define TP_ITYP_TYPE(x) (((x) & 0x6) >> 1) /* Initiator Type */
+#define TP_ITYP_TYPE_ARM 0x0
+#define TP_ITYP_TYPE_PPC 0x1 /* PowerPC */
+#define TP_ITYP_TYPE_OTHER 0x2 /* StarCore DSP */
+#define TP_ITYP_TYPE_HA 0x3 /* HW Accelerator */
+#define TP_ITYP_THDS(x) (((x) & 0x18) >> 3) /* # threads */
+#define TP_ITYP_VER(x) (((x) & 0xe0) >> 5) /* Initiator Version */
+#define TY_ITYP_VER_A7 0x1
+#define TY_ITYP_VER_A53 0x2
+#define TY_ITYP_VER_A57 0x3
+
+#define TP_CLUSTER_EOC_MASK 0xc0000000 /* end of clusters mask */
+#define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */
+#define TP_INIT_PER_CLUSTER 4
+
+#define FSL_LS102xA_DEVDISR3_PCIE1 0x80000000
+#define FSL_LS102xA_DEVDISR3_PCIE2 0x40000000
+
+/*
+ * Define default values for some CCSR macros to make header files cleaner*
+ *
+ * To completely disable CCSR relocation in a board header file, define
+ * CONFIG_SYS_CCSR_DO_NOT_RELOCATE. This will force CONFIG_SYS_CCSRBAR_PHYS
+ * to a value that is the same as CONFIG_SYS_CCSRBAR.
+ */
+
+#ifdef CONFIG_SYS_CCSRBAR_PHYS
+#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly. Use \
+CONFIG_SYS_CCSRBAR_PHYS_LOW and/or CONFIG_SYS_CCSRBAR_PHYS_HIGH instead."
+#endif
+
+#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#undef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR
+#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf
+#else
+#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0
+#endif
+#endif
+
+#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT
+#endif
+
+#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \
+ CONFIG_SYS_CCSRBAR_PHYS_LOW)
+
+struct sys_info {
+ unsigned long freq_processor[CONFIG_MAX_CPUS];
+ unsigned long freq_systembus;
+ unsigned long freq_ddrbus;
+ unsigned long freq_localbus;
+ unsigned long freq_sdhc;
+#ifdef CONFIG_SYS_DPAA_FMAN
+ unsigned long freq_fman[CONFIG_SYS_NUM_FMAN];
+#endif
+ unsigned long freq_qman;
+};
+
+#define CONFIG_SYS_FSL_FM1_OFFSET 0xa00000
+#define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET 0xa88000
+#define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET 0xa89000
+#define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET 0xa8a000
+#define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET 0xa8b000
+#define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET 0xa8c000
+#define CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET 0xa8d000
+
+#define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0xae0000
+#define CONFIG_SYS_FSL_FM1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_OFFSET)
+#define CONFIG_SYS_FSL_FM1_DTSEC1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET)
+
+/* Device Configuration and Pin Control */
+struct ccsr_gur {
+ u32 porsr1; /* POR status 1 */
+#define FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK 0xFF800000
+ u32 porsr2; /* POR status 2 */
+ u8 res_008[0x20-0x8];
+ u32 gpporcr1; /* General-purpose POR configuration */
+ u32 gpporcr2;
+#define FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT 25
+#define FSL_CHASSIS2_DCFG_FUSESR_VID_MASK 0x1F
+#define FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT 20
+#define FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK 0x1F
+ u32 dcfg_fusesr; /* Fuse status register */
+ u8 res_02c[0x70-0x2c];
+ u32 devdisr; /* Device disable control */
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_1 0x80000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_2 0x40000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_3 0x20000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_4 0x10000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_5 0x08000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_6 0x04000000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_9 0x00800000
+#define FSL_CHASSIS2_DEVDISR2_DTSEC1_10 0x00400000
+#define FSL_CHASSIS2_DEVDISR2_10GEC1_1 0x00800000
+#define FSL_CHASSIS2_DEVDISR2_10GEC1_2 0x00400000
+#define FSL_CHASSIS2_DEVDISR2_10GEC1_3 0x80000000
+#define FSL_CHASSIS2_DEVDISR2_10GEC1_4 0x40000000
+ u32 devdisr2; /* Device disable control 2 */
+ u32 devdisr3; /* Device disable control 3 */
+ u32 devdisr4; /* Device disable control 4 */
+ u32 devdisr5; /* Device disable control 5 */
+ u32 devdisr6; /* Device disable control 6 */
+ u32 devdisr7; /* Device disable control 7 */
+ u8 res_08c[0x94-0x8c];
+ u32 coredisru; /* uppper portion for support of 64 cores */
+ u32 coredisrl; /* lower portion for support of 64 cores */
+ u8 res_09c[0xa0-0x9c];
+ u32 pvr; /* Processor version */
+ u32 svr; /* System version */
+ u32 mvr; /* Manufacturing version */
+ u8 res_0ac[0xb0-0xac];
+ u32 rstcr; /* Reset control */
+ u32 rstrqpblsr; /* Reset request preboot loader status */
+ u8 res_0b8[0xc0-0xb8];
+ u32 rstrqmr1; /* Reset request mask */
+ u8 res_0c4[0xc8-0xc4];
+ u32 rstrqsr1; /* Reset request status */
+ u8 res_0cc[0xd4-0xcc];
+ u32 rstrqwdtmrl; /* Reset request WDT mask */
+ u8 res_0d8[0xdc-0xd8];
+ u32 rstrqwdtsrl; /* Reset request WDT status */
+ u8 res_0e0[0xe4-0xe0];
+ u32 brrl; /* Boot release */
+ u8 res_0e8[0x100-0xe8];
+ u32 rcwsr[16]; /* Reset control word status */
+#define FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT 25
+#define FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK 0x1f
+#define FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT 16
+#define FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK 0x3f
+#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK 0xffff0000
+#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT 16
+ u8 res_140[0x200-0x140];
+ u32 scratchrw[4]; /* Scratch Read/Write */
+ u8 res_210[0x300-0x210];
+ u32 scratchw1r[4]; /* Scratch Read (Write once) */
+ u8 res_310[0x400-0x310];
+ u32 crstsr[12];
+ u8 res_430[0x500-0x430];
+
+ /* PCI Express n Logical I/O Device Number register */
+ u32 dcfg_ccsr_pex1liodnr;
+ u32 dcfg_ccsr_pex2liodnr;
+ u32 dcfg_ccsr_pex3liodnr;
+ u32 dcfg_ccsr_pex4liodnr;
+ /* RIO n Logical I/O Device Number register */
+ u32 dcfg_ccsr_rio1liodnr;
+ u32 dcfg_ccsr_rio2liodnr;
+ u32 dcfg_ccsr_rio3liodnr;
+ u32 dcfg_ccsr_rio4liodnr;
+ /* USB Logical I/O Device Number register */
+ u32 dcfg_ccsr_usb1liodnr;
+ u32 dcfg_ccsr_usb2liodnr;
+ u32 dcfg_ccsr_usb3liodnr;
+ u32 dcfg_ccsr_usb4liodnr;
+ /* SD/MMC Logical I/O Device Number register */
+ u32 dcfg_ccsr_sdmmc1liodnr;
+ u32 dcfg_ccsr_sdmmc2liodnr;
+ u32 dcfg_ccsr_sdmmc3liodnr;
+ u32 dcfg_ccsr_sdmmc4liodnr;
+ /* RIO Message Unit Logical I/O Device Number register */
+ u32 dcfg_ccsr_riomaintliodnr;
+
+ u8 res_544[0x550-0x544];
+ u32 sataliodnr[4];
+ u8 res_560[0x570-0x560];
+
+ u32 dcfg_ccsr_misc1liodnr;
+ u32 dcfg_ccsr_misc2liodnr;
+ u32 dcfg_ccsr_misc3liodnr;
+ u32 dcfg_ccsr_misc4liodnr;
+ u32 dcfg_ccsr_dma1liodnr;
+ u32 dcfg_ccsr_dma2liodnr;
+ u32 dcfg_ccsr_dma3liodnr;
+ u32 dcfg_ccsr_dma4liodnr;
+ u32 dcfg_ccsr_spare1liodnr;
+ u32 dcfg_ccsr_spare2liodnr;
+ u32 dcfg_ccsr_spare3liodnr;
+ u32 dcfg_ccsr_spare4liodnr;
+ u8 res_5a0[0x600-0x5a0];
+ u32 dcfg_ccsr_pblsr;
+
+ u32 pamubypenr;
+ u32 dmacr1;
+
+ u8 res_60c[0x610-0x60c];
+ u32 dcfg_ccsr_gensr1;
+ u32 dcfg_ccsr_gensr2;
+ u32 dcfg_ccsr_gensr3;
+ u32 dcfg_ccsr_gensr4;
+ u32 dcfg_ccsr_gencr1;
+ u32 dcfg_ccsr_gencr2;
+ u32 dcfg_ccsr_gencr3;
+ u32 dcfg_ccsr_gencr4;
+ u32 dcfg_ccsr_gencr5;
+ u32 dcfg_ccsr_gencr6;
+ u32 dcfg_ccsr_gencr7;
+ u8 res_63c[0x658-0x63c];
+ u32 dcfg_ccsr_cgensr1;
+ u32 dcfg_ccsr_cgensr0;
+ u8 res_660[0x678-0x660];
+ u32 dcfg_ccsr_cgencr1;
+
+ u32 dcfg_ccsr_cgencr0;
+ u8 res_680[0x700-0x680];
+ u32 dcfg_ccsr_sriopstecr;
+ u32 dcfg_ccsr_dcsrcr;
+
+ u8 res_708[0x740-0x708]; /* add more registers when needed */
+ u32 tp_ityp[64]; /* Topology Initiator Type Register */
+ struct {
+ u32 upper;
+ u32 lower;
+ } tp_cluster[16];
+ u8 res_8c0[0xa00-0x8c0]; /* add more registers when needed */
+ u32 dcfg_ccsr_qmbm_warmrst;
+ u8 res_a04[0xa20-0xa04]; /* add more registers when needed */
+ u32 dcfg_ccsr_reserved0;
+ u32 dcfg_ccsr_reserved1;
+};
+
+#define SCFG_QSPI_CLKSEL 0x40100000
+#define SCFG_USBDRVVBUS_SELCR_USB1 0x00000000
+#define SCFG_USBDRVVBUS_SELCR_USB2 0x00000001
+#define SCFG_USBDRVVBUS_SELCR_USB3 0x00000002
+#define SCFG_USBPWRFAULT_INACTIVE 0x00000000
+#define SCFG_USBPWRFAULT_SHARED 0x00000001
+#define SCFG_USBPWRFAULT_DEDICATED 0x00000002
+#define SCFG_USBPWRFAULT_USB3_SHIFT 4
+#define SCFG_USBPWRFAULT_USB2_SHIFT 2
+#define SCFG_USBPWRFAULT_USB1_SHIFT 0
+
+#define SCFG_SNPCNFGCR_SECRDSNP 0x80000000
+#define SCFG_SNPCNFGCR_SECWRSNP 0x40000000
+
+/* Supplemental Configuration Unit */
+struct ccsr_scfg {
+ u8 res_000[0x100-0x000];
+ u32 usb2_icid;
+ u32 usb3_icid;
+ u8 res_108[0x114-0x108];
+ u32 dma_icid;
+ u32 sata_icid;
+ u32 usb1_icid;
+ u32 qe_icid;
+ u32 sdhc_icid;
+ u32 edma_icid;
+ u32 etr_icid;
+ u32 core_sft_rst[4];
+ u8 res_140[0x158-0x140];
+ u32 altcbar;
+ u32 qspi_cfg;
+ u8 res_160[0x180-0x160];
+ u32 dmamcr;
+ u8 res_184[0x18c-0x184];
+ u32 debug_icid;
+ u8 res_190[0x1a4-0x190];
+ u32 snpcnfgcr;
+ u8 res_1a8[0x1ac-0x1a8];
+ u32 intpcr;
+ u8 res_1b0[0x204-0x1b0];
+ u32 coresrencr;
+ u8 res_208[0x220-0x208];
+ u32 rvbar0_0;
+ u32 rvbar0_1;
+ u32 rvbar1_0;
+ u32 rvbar1_1;
+ u32 rvbar2_0;
+ u32 rvbar2_1;
+ u32 rvbar3_0;
+ u32 rvbar3_1;
+ u32 lpmcsr;
+ u8 res_244[0x400-0x244];
+ u32 qspidqscr;
+ u32 ecgtxcmcr;
+ u32 sdhciovselcr;
+ u32 rcwpmuxcr0;
+ u32 usbdrvvbus_selcr;
+ u32 usbpwrfault_selcr;
+ u32 usb_refclk_selcr1;
+ u32 usb_refclk_selcr2;
+ u32 usb_refclk_selcr3;
+ u8 res_424[0x600-0x424];
+ u32 scratchrw[4];
+ u8 res_610[0x680-0x610];
+ u32 corebcr;
+ u8 res_684[0x1000-0x684];
+ u32 pex1msiir;
+ u32 pex1msir;
+ u8 res_1008[0x2000-0x1008];
+ u32 pex2;
+ u32 pex2msir;
+ u8 res_2008[0x3000-0x2008];
+ u32 pex3msiir;
+ u32 pex3msir;
+};
+
+/* Clocking */
+struct ccsr_clk {
+ struct {
+ u32 clkcncsr; /* core cluster n clock control status */
+ u8 res_004[0x0c];
+ u32 clkcghwacsr; /* Clock generator n hardware accelerator */
+ u8 res_014[0x0c];
+ } clkcsr[4];
+ u8 res_040[0x780]; /* 0x100 */
+ struct {
+ u32 pllcngsr;
+ u8 res_804[0x1c];
+ } pllcgsr[2];
+ u8 res_840[0x1c0];
+ u32 clkpcsr; /* 0xa00 Platform clock domain control/status */
+ u8 res_a04[0x1fc];
+ u32 pllpgsr; /* 0xc00 Platform PLL General Status */
+ u8 res_c04[0x1c];
+ u32 plldgsr; /* 0xc20 DDR PLL General Status */
+ u8 res_c24[0x3dc];
+};
+
+/* System Counter */
+struct sctr_regs {
+ u32 cntcr;
+ u32 cntsr;
+ u32 cntcv1;
+ u32 cntcv2;
+ u32 resv1[4];
+ u32 cntfid0;
+ u32 cntfid1;
+ u32 resv2[1002];
+ u32 counterid[12];
+};
+
+#define MAX_SERDES 1
+#define SRDS_MAX_LANES 4
+#define SRDS_MAX_BANK 2
+struct ccsr_serdes {
+ struct {
+ u32 rstctl; /* Reset Control Register */
+#define SRDS_RSTCTL_RST 0x80000000
+#define SRDS_RSTCTL_RSTDONE 0x40000000
+#define SRDS_RSTCTL_RSTERR 0x20000000
+#define SRDS_RSTCTL_SWRST 0x10000000
+#define SRDS_RSTCTL_SDEN 0x00000020
+#define SRDS_RSTCTL_SDRST_B 0x00000040
+#define SRDS_RSTCTL_PLLRST_B 0x00000080
+ u32 pllcr0; /* PLL Control Register 0 */
+#define SRDS_PLLCR0_POFF 0x80000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
+#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
+#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
+#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000
+#define SRDS_PLLCR0_PLL_LCK 0x00800000
+#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000
+#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000
+#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000
+#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000
+#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000
+ u32 pllcr1; /* PLL Control Register 1 */
+#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
+ u32 res_0c; /* 0x00c */
+ u32 pllcr3;
+ u32 pllcr4;
+ u8 res_18[0x20-0x18];
+ } bank[2];
+ u8 res_40[0x90-0x40];
+ u32 srdstcalcr; /* 0x90 TX Calibration Control */
+ u8 res_94[0xa0-0x94];
+ u32 srdsrcalcr; /* 0xa0 RX Calibration Control */
+ u8 res_a4[0xb0-0xa4];
+ u32 srdsgr0; /* 0xb0 General Register 0 */
+ u8 res_b4[0xe0-0xb4];
+ u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */
+ u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */
+ u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */
+ u32 srdspccr3; /* 0xec Protocol Converter Config 3 */
+ u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */
+ u8 res_f4[0x100-0xf4];
+ struct {
+ u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */
+ u8 res_104[0x120-0x104];
+ } srdslnpssr[4];
+ u8 res_180[0x300-0x180];
+ u32 srdspexeqcr;
+ u32 srdspexeqpcr[11];
+ u8 res_330[0x400-0x330];
+ u32 srdspexapcr;
+ u8 res_404[0x440-0x404];
+ u32 srdspexbpcr;
+ u8 res_444[0x800-0x444];
+ struct {
+ u32 gcr0; /* 0x800 General Control Register 0 */
+ u32 gcr1; /* 0x804 General Control Register 1 */
+ u32 gcr2; /* 0x808 General Control Register 2 */
+ u32 sscr0;
+ u32 recr0; /* 0x810 Receive Equalization Control */
+ u32 recr1;
+ u32 tecr0; /* 0x818 Transmit Equalization Control */
+ u32 sscr1;
+ u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */
+ u8 res_824[0x83c-0x824];
+ u32 tcsr3;
+ } lane[4]; /* Lane A, B, C, D, E, F, G, H */
+ u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */
+};
+
+#define CCI400_CTRLORD_TERM_BARRIER 0x00000008
+#define CCI400_CTRLORD_EN_BARRIER 0
+#define CCI400_SHAORD_NON_SHAREABLE 0x00000002
+#define CCI400_DVM_MESSAGE_REQ_EN 0x00000002
+#define CCI400_SNOOP_REQ_EN 0x00000001
+
+/* CCI-400 registers */
+struct ccsr_cci400 {
+ u32 ctrl_ord; /* Control Override */
+ u32 spec_ctrl; /* Speculation Control */
+ u32 secure_access; /* Secure Access */
+ u32 status; /* Status */
+ u32 impr_err; /* Imprecise Error */
+ u8 res_14[0x100 - 0x14];
+ u32 pmcr; /* Performance Monitor Control */
+ u8 res_104[0xfd0 - 0x104];
+ u32 pid[8]; /* Peripheral ID */
+ u32 cid[4]; /* Component ID */
+ struct {
+ u32 snoop_ctrl; /* Snoop Control */
+ u32 sha_ord; /* Shareable Override */
+ u8 res_1008[0x1100 - 0x1008];
+ u32 rc_qos_ord; /* read channel QoS Value Override */
+ u32 wc_qos_ord; /* read channel QoS Value Override */
+ u8 res_1108[0x110c - 0x1108];
+ u32 qos_ctrl; /* QoS Control */
+ u32 max_ot; /* Max OT */
+ u8 res_1114[0x1130 - 0x1114];
+ u32 target_lat; /* Target Latency */
+ u32 latency_regu; /* Latency Regulation */
+ u32 qos_range; /* QoS Range */
+ u8 res_113c[0x2000 - 0x113c];
+ } slave[5]; /* Slave Interface */
+ u8 res_6000[0x9004 - 0x6000];
+ u32 cycle_counter; /* Cycle counter */
+ u32 count_ctrl; /* Count Control */
+ u32 overflow_status; /* Overflow Flag Status */
+ u8 res_9010[0xa000 - 0x9010];
+ struct {
+ u32 event_select; /* Event Select */
+ u32 event_count; /* Event Count */
+ u32 counter_ctrl; /* Counter Control */
+ u32 overflow_status; /* Overflow Flag Status */
+ u8 res_a010[0xb000 - 0xa010];
+ } pcounter[4]; /* Performance Counter */
+ u8 res_e004[0x10000 - 0xe004];
+};
+
+/* MMU 500 */
+#define SMMU_SCR0 (SMMU_BASE + 0x0)
+#define SMMU_SCR1 (SMMU_BASE + 0x4)
+#define SMMU_SCR2 (SMMU_BASE + 0x8)
+#define SMMU_SACR (SMMU_BASE + 0x10)
+#define SMMU_IDR0 (SMMU_BASE + 0x20)
+#define SMMU_IDR1 (SMMU_BASE + 0x24)
+
+#define SMMU_NSCR0 (SMMU_BASE + 0x400)
+#define SMMU_NSCR2 (SMMU_BASE + 0x408)
+#define SMMU_NSACR (SMMU_BASE + 0x410)
+
+#define SCR0_CLIENTPD_MASK 0x00000001
+#define SCR0_USFCFG_MASK 0x00000400
+
+#endif /* __ARCH_FSL_LSCH2_IMMAP_H__*/
diff --git a/arch/arm/include/asm/arch-fsl-lsch2/imx-regs.h b/arch/arm/include/asm/arch-fsl-lsch2/imx-regs.h
new file mode 100644
index 0000000..d6a34e6
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch2/imx-regs.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+#ifndef __ASM_ARCH_FSL_LSCH2_IMX_REGS_H__
+#define __ASM_ARCH_FSL_LSCH2_IMX_REGS_H__
+
+#define I2C_QUIRK_REG /* enable 8-bit driver */
+#ifdef CONFIG_LPUART_32B_REG
+struct lpuart_fsl {
+ u32 baud;
+ u32 stat;
+ u32 ctrl;
+ u32 data;
+ u32 match;
+ u32 modir;
+ u32 fifo;
+ u32 water;
+};
+#else
+struct lpuart_fsl {
+ u8 ubdh;
+ u8 ubdl;
+ u8 uc1;
+ u8 uc2;
+ u8 us1;
+ u8 us2;
+ u8 uc3;
+ u8 ud;
+ u8 uma1;
+ u8 uma2;
+ u8 uc4;
+ u8 uc5;
+ u8 ued;
+ u8 umodem;
+ u8 uir;
+ u8 reserved;
+ u8 upfifo;
+ u8 ucfifo;
+ u8 usfifo;
+ u8 utwfifo;
+ u8 utcfifo;
+ u8 urwfifo;
+ u8 urcfifo;
+ u8 rsvd[28];
+};
+#endif
+
+#endif /* __ASM_ARCH_FSL_LSCH2_IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-fsl-lsch2/mmu.h b/arch/arm/include/asm/arch-fsl-lsch2/mmu.h
new file mode 100644
index 0000000..e28344c
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch2/mmu.h
@@ -0,0 +1,10 @@
+/*
+ * Copyright 2014, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV8_FSL_LSCH2_MMU_H_
+#define _ASM_ARMV8_FSL_LSCH2_MMU_H_
+#include <asm/arch-armv8/mmu.h>
+#endif /* _ASM_ARMV8_FSL_LSCH2_MMU_H_ */
diff --git a/arch/arm/include/asm/arch-fsl-lsch2/ns_access.h b/arch/arm/include/asm/arch-fsl-lsch2/ns_access.h
new file mode 100644
index 0000000..41d0e77
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch2/ns_access.h
@@ -0,0 +1,179 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_NS_ACCESS_H_
+#define __FSL_NS_ACCESS_H_
+
+enum csu_cslx_access {
+ CSU_NS_SUP_R = 0x08,
+ CSU_NS_SUP_W = 0x80,
+ CSU_NS_SUP_RW = 0x88,
+ CSU_NS_USER_R = 0x04,
+ CSU_NS_USER_W = 0x40,
+ CSU_NS_USER_RW = 0x44,
+ CSU_S_SUP_R = 0x02,
+ CSU_S_SUP_W = 0x20,
+ CSU_S_SUP_RW = 0x22,
+ CSU_S_USER_R = 0x01,
+ CSU_S_USER_W = 0x10,
+ CSU_S_USER_RW = 0x11,
+ CSU_ALL_RW = 0xff,
+};
+
+enum csu_cslx_ind {
+ CSU_CSLX_PCIE2_IO = 0,
+ CSU_CSLX_PCIE1_IO,
+ CSU_CSLX_MG2TPR_IP,
+ CSU_CSLX_IFC_MEM,
+ CSU_CSLX_OCRAM,
+ CSU_CSLX_GIC,
+ CSU_CSLX_PCIE1,
+ CSU_CSLX_OCRAM2,
+ CSU_CSLX_QSPI_MEM,
+ CSU_CSLX_PCIE2,
+ CSU_CSLX_SATA,
+ CSU_CSLX_USB1,
+ CSU_CSLX_QM_BM_SWPORTAL,
+ CSU_CSLX_PCIE3 = 16,
+ CSU_CSLX_PCIE3_IO,
+ CSU_CSLX_USB3 = 20,
+ CSU_CSLX_USB2,
+ CSU_CSLX_SERDES = 32,
+ CSU_CSLX_QDMA,
+ CSU_CSLX_LPUART2,
+ CSU_CSLX_LPUART1,
+ CSU_CSLX_LPUART4,
+ CSU_CSLX_LPUART3,
+ CSU_CSLX_LPUART6,
+ CSU_CSLX_LPUART5,
+ CSU_CSLX_DSPI1 = 41,
+ CSU_CSLX_QSPI,
+ CSU_CSLX_ESDHC,
+ CSU_CSLX_IFC = 45,
+ CSU_CSLX_I2C1,
+ CSU_CSLX_I2C3 = 48,
+ CSU_CSLX_I2C2,
+ CSU_CSLX_DUART2 = 50,
+ CSU_CSLX_DUART1,
+ CSU_CSLX_WDT2,
+ CSU_CSLX_WDT1,
+ CSU_CSLX_EDMA,
+ CSU_CSLX_SYS_CNT,
+ CSU_CSLX_DMA_MUX2,
+ CSU_CSLX_DMA_MUX1,
+ CSU_CSLX_DDR,
+ CSU_CSLX_QUICC,
+ CSU_CSLX_DCFG_CCU_RCPM = 60,
+ CSU_CSLX_SECURE_BOOTROM,
+ CSU_CSLX_SFP,
+ CSU_CSLX_TMU,
+ CSU_CSLX_SECURE_MONITOR,
+ CSU_CSLX_SCFG,
+ CSU_CSLX_FM = 66,
+ CSU_CSLX_SEC5_5,
+ CSU_CSLX_BM,
+ CSU_CSLX_QM,
+ CSU_CSLX_GPIO2 = 70,
+ CSU_CSLX_GPIO1,
+ CSU_CSLX_GPIO4,
+ CSU_CSLX_GPIO3,
+ CSU_CSLX_PLATFORM_CONT,
+ CSU_CSLX_CSU,
+ CSU_CSLX_IIC4 = 77,
+ CSU_CSLX_WDT4,
+ CSU_CSLX_WDT3,
+ CSU_CSLX_WDT5 = 81,
+ CSU_CSLX_FTM2 = 86,
+ CSU_CSLX_FTM1,
+ CSU_CSLX_FTM4,
+ CSU_CSLX_FTM3,
+ CSU_CSLX_FTM6 = 90,
+ CSU_CSLX_FTM5,
+ CSU_CSLX_FTM8,
+ CSU_CSLX_FTM7,
+ CSU_CSLX_DSCR = 121,
+};
+
+struct csu_ns_dev {
+ unsigned long ind;
+ uint32_t val;
+};
+
+static struct csu_ns_dev ns_dev[] = {
+ {CSU_CSLX_PCIE2_IO, CSU_ALL_RW},
+ {CSU_CSLX_PCIE1_IO, CSU_ALL_RW},
+ {CSU_CSLX_MG2TPR_IP, CSU_ALL_RW},
+ {CSU_CSLX_IFC_MEM, CSU_ALL_RW},
+ {CSU_CSLX_OCRAM, CSU_ALL_RW},
+ {CSU_CSLX_GIC, CSU_ALL_RW},
+ {CSU_CSLX_PCIE1, CSU_ALL_RW},
+ {CSU_CSLX_OCRAM2, CSU_ALL_RW},
+ {CSU_CSLX_QSPI_MEM, CSU_ALL_RW},
+ {CSU_CSLX_PCIE2, CSU_ALL_RW},
+ {CSU_CSLX_SATA, CSU_ALL_RW},
+ {CSU_CSLX_USB1, CSU_ALL_RW},
+ {CSU_CSLX_QM_BM_SWPORTAL, CSU_ALL_RW},
+ {CSU_CSLX_PCIE3, CSU_ALL_RW},
+ {CSU_CSLX_PCIE3_IO, CSU_ALL_RW},
+ {CSU_CSLX_USB3, CSU_ALL_RW},
+ {CSU_CSLX_USB2, CSU_ALL_RW},
+ {CSU_CSLX_SERDES, CSU_ALL_RW},
+ {CSU_CSLX_QDMA, CSU_ALL_RW},
+ {CSU_CSLX_LPUART2, CSU_ALL_RW},
+ {CSU_CSLX_LPUART1, CSU_ALL_RW},
+ {CSU_CSLX_LPUART4, CSU_ALL_RW},
+ {CSU_CSLX_LPUART3, CSU_ALL_RW},
+ {CSU_CSLX_LPUART6, CSU_ALL_RW},
+ {CSU_CSLX_LPUART5, CSU_ALL_RW},
+ {CSU_CSLX_DSPI1, CSU_ALL_RW},
+ {CSU_CSLX_QSPI, CSU_ALL_RW},
+ {CSU_CSLX_ESDHC, CSU_ALL_RW},
+ {CSU_CSLX_IFC, CSU_ALL_RW},
+ {CSU_CSLX_I2C1, CSU_ALL_RW},
+ {CSU_CSLX_I2C3, CSU_ALL_RW},
+ {CSU_CSLX_I2C2, CSU_ALL_RW},
+ {CSU_CSLX_DUART2, CSU_ALL_RW},
+ {CSU_CSLX_DUART1, CSU_ALL_RW},
+ {CSU_CSLX_WDT2, CSU_ALL_RW},
+ {CSU_CSLX_WDT1, CSU_ALL_RW},
+ {CSU_CSLX_EDMA, CSU_ALL_RW},
+ {CSU_CSLX_SYS_CNT, CSU_ALL_RW},
+ {CSU_CSLX_DMA_MUX2, CSU_ALL_RW},
+ {CSU_CSLX_DMA_MUX1, CSU_ALL_RW},
+ {CSU_CSLX_DDR, CSU_ALL_RW},
+ {CSU_CSLX_QUICC, CSU_ALL_RW},
+ {CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW},
+ {CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW},
+ {CSU_CSLX_SFP, CSU_ALL_RW},
+ {CSU_CSLX_TMU, CSU_ALL_RW},
+ {CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW},
+ {CSU_CSLX_SCFG, CSU_ALL_RW},
+ {CSU_CSLX_FM, CSU_ALL_RW},
+ {CSU_CSLX_SEC5_5, CSU_ALL_RW},
+ {CSU_CSLX_BM, CSU_ALL_RW},
+ {CSU_CSLX_QM, CSU_ALL_RW},
+ {CSU_CSLX_GPIO2, CSU_ALL_RW},
+ {CSU_CSLX_GPIO1, CSU_ALL_RW},
+ {CSU_CSLX_GPIO4, CSU_ALL_RW},
+ {CSU_CSLX_GPIO3, CSU_ALL_RW},
+ {CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW},
+ {CSU_CSLX_CSU, CSU_ALL_RW},
+ {CSU_CSLX_IIC4, CSU_ALL_RW},
+ {CSU_CSLX_WDT4, CSU_ALL_RW},
+ {CSU_CSLX_WDT3, CSU_ALL_RW},
+ {CSU_CSLX_WDT5, CSU_ALL_RW},
+ {CSU_CSLX_FTM2, CSU_ALL_RW},
+ {CSU_CSLX_FTM1, CSU_ALL_RW},
+ {CSU_CSLX_FTM4, CSU_ALL_RW},
+ {CSU_CSLX_FTM3, CSU_ALL_RW},
+ {CSU_CSLX_FTM6, CSU_ALL_RW},
+ {CSU_CSLX_FTM5, CSU_ALL_RW},
+ {CSU_CSLX_FTM8, CSU_ALL_RW},
+ {CSU_CSLX_FTM7, CSU_ALL_RW},
+ {CSU_CSLX_DSCR, CSU_ALL_RW},
+};
+
+#endif
diff --git a/arch/arm/include/asm/arch-fsl-lsch2/soc.h b/arch/arm/include/asm/arch-fsl-lsch2/soc.h
new file mode 100644
index 0000000..73f7de5
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch2/soc.h
@@ -0,0 +1,7 @@
+/*
+ * Copyright 2015 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+void fsl_lsch2_early_init_f(void);
diff --git a/arch/arm/include/asm/arch-fsl-lsch2/spl.h b/arch/arm/include/asm/arch-fsl-lsch2/spl.h
new file mode 100644
index 0000000..356a338
--- /dev/null
+++ b/arch/arm/include/asm/arch-fsl-lsch2/spl.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_SPL_H__
+#define __ASM_ARCH_SPL_H__
+
+#define BOOT_DEVICE_NONE 0
+#define BOOT_DEVICE_XIP 1
+#define BOOT_DEVICE_XIPWAIT 2
+#define BOOT_DEVICE_NAND 3
+#define BOOT_DEVICE_ONENAND 4
+#define BOOT_DEVICE_MMC1 5
+#define BOOT_DEVICE_MMC2 6
+#define BOOT_DEVICE_MMC2_2 7
+#define BOOT_DEVICE_SPI 10
+
+#endif /* __ASM_ARCH_SPL_H__ */
diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h
index 0c928d4..50e3a83 100644
--- a/arch/arm/include/asm/armv8/mmu.h
+++ b/arch/arm/include/asm/armv8/mmu.h
@@ -65,6 +65,7 @@
/*
* Section
*/
+#define PMD_SECT_NS (1 << 5)
#define PMD_SECT_NON_SHARE (0 << 8)
#define PMD_SECT_OUTER_SHARE (2 << 8)
#define PMD_SECT_INNER_SHARE (3 << 8)
diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h
index 22fff02..bca9814 100644
--- a/arch/arm/include/asm/config.h
+++ b/arch/arm/include/asm/config.h
@@ -18,6 +18,9 @@
#ifdef CONFIG_FSL_LSCH3
#include <asm/arch-fsl-lsch3/config.h>
#endif
+#ifdef CONFIG_FSL_LSCH2
+#include <asm/arch-fsl-lsch2/config.h>
+#endif
#if defined(CONFIG_LS102XA) || \
defined(CONFIG_CPU_PXA27X) || \
diff --git a/include/common.h b/include/common.h
index c12f402..6d92988 100644
--- a/include/common.h
+++ b/include/common.h
@@ -76,6 +76,9 @@ typedef volatile unsigned char vu_char;
#ifdef CONFIG_SOC_DA8XX
#include <asm/arch/hardware.h>
#endif
+#ifdef CONFIG_LS1043A
+#include <asm/arch-fsl-lsch2/immap_lsch2.h>
+#endif
#include <part.h>
#include <flash.h>
--
2.1.0.27.g96db324
More information about the U-Boot
mailing list