[U-Boot] [PATCH] mtd: nand: fsmc: Fixes and cleanup for fsmc_nand_switch_ecc()

[Scott Wood]

On Mon, 2015-09-14 at 08:47 +0200, Stefan Roese wrote:
> This patch addresses some comments raised by Scott in the last versions.
> Here the changes in detail:
> 
> - Removed __maybe_unused as its not needed
> - Added check for strength == 4 and error out for the unsupported
>   ECC strength values
> - Don't set .caclulate, .correct, and .bytes for NAND_ECC_SOFT_BCH as this
>   will be done in nand_scan_tail()
> - Set .caclulate back to fsmc_read_hwecc() in the HW case
> - Added comment that this function will only be called on SPEAr platforms,
>   not supporting the BCH8 HW ECC (FSMC_VER8)
> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Scott Wood <scottwood at freescale.com>
> Cc: Tom Rini <trini at konsulko.com>
> ---
>  drivers/mtd/nand/fsmc_nand.c | 21 +++++++++++++++------
>  1 file changed, 15 insertions(+), 6 deletions(-)

Acked-by: Scott Wood <scottwood at freescale.com>

-Scott