[U-Boot] [PATCH 09/15] ARM: uniphier: increase CONFIG_SYS_MALLOC_F_LEN to bind all nodes

Masahiro Yamada yamada.masahiro at socionext.com
Tue Sep 1 15:50:26 CEST 2015


In the next commit, I will add "u-boot,dm-pre-reloc" to the "soc"
(simple-bus) nodes in UniPhier device trees.  But, before that,
CONFIG_SYS_MALLOC_F_LEN must be increased.

Adding "u-boot,dm-pre-reloc" to a simple-bus node causes it to bind
all of its child nodes.  (See simple_bus_post_bind() function)

Actually, I want only UART0 and pinctrl to be bound in SPL and before
relocation in U-boot proper.  But, with "u-boot,dm-pre-reloc" in the
simple-bus node, all the other unwanted nodes are also bound.  The
default value for CONFIG_SYS_MALLOC_F_LEN, 0x400, is not enough for
that.  Increase the pre-reloc malloc size to 0x2000, hoping the root
cause will be fixed later.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 configs/ph1_ld4_defconfig  | 1 +
 configs/ph1_pro4_defconfig | 1 +
 configs/ph1_sld8_defconfig | 1 +
 3 files changed, 3 insertions(+)

diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig
index 74e759a..61eb037 100644
--- a/configs/ph1_ld4_defconfig
+++ b/configs/ph1_ld4_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_MACH_PH1_LD4=y
 CONFIG_PFC_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig
index 714339a..7582fdf 100644
--- a/configs/ph1_pro4_defconfig
+++ b/configs/ph1_pro4_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_PFC_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref"
diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig
index df0e005..236e673 100644
--- a/configs/ph1_sld8_defconfig
+++ b/configs/ph1_sld8_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_UNIPHIER=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_MACH_PH1_SLD8=y
 CONFIG_PFC_MICRO_SUPPORT_CARD=y
 CONFIG_SYS_TEXT_BASE=0x84000000
-- 
1.9.1



More information about the U-Boot mailing list