[U-Boot] [PATCH 1/3] imx-common: fix iomux settings

[Stefano Babic]

Hi Peng,

On 20/09/2015 15:02, Peng Fan wrote:
> On Sun, Sep 20, 2015 at 01:33:20PM +0200, Benoît Thébaudeau wrote:
>> Hi Stefano, Peng, Fabio, all,
>>
>> Sorry for seeing this only now, but...
>>
>> On Sun, Sep 20, 2015 at 9:43 AM, Stefano Babic <sbabic at denx.de> wrote:
>>>
>>>
>>> On 14/09/2015 07:34, Peng Fan wrote:
>>>> When setting iomux for a pin mux, there is no need to check mux_ctrl_ofs.
>>
>> This assumption is wrong. This check was there for a reason. Some i.MX
>> SoCs have some registers controlling pads but not muxes, either for a
>> single pin or for groups of pins:
>> http://git.denx.de/?p=u-boot/u-boot-imx.git;a=blob;f=arch/arm/include/asm/arch-mx25/iomux-mx25.h;h=220cf4ef2e94aa69482557852ed0cc0690a79cec;hb=HEAD
>> http://git.denx.de/?p=u-boot/u-boot-imx.git;a=blob;f=arch/arm/include/asm/arch-mx35/iomux-mx35.h;h=5898b46f4720088b18882e21d0d2424fff987ab5;hb=HEAD
>> http://git.denx.de/?p=u-boot/u-boot-imx.git;a=blob;f=arch/arm/include/asm/arch-mx5/iomux-mx51.h;h=b7b169505f91c4a213be59efca47e8a5aed770e7;hb=HEAD
>>
>> I have not checked whether these cases are currently used in-tree by
>> U-Boot, but they have to be possible anyway in order to support these
>> SoCs.
> 
> Benoît,
> 
> Thanks for pointing this out.
> You mean piece of code like this, right?
> 509         MX25_PAD_CTL_GRP_DVS_MISC               = IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 510         MX25_PAD_CTL_GRP_DSE_FEC                = IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 511         MX25_PAD_CTL_GRP_DVS_JTAG               = IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 512         MX25_PAD_CTL_GRP_DSE_NFC                = IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 513         MX25_PAD_CTL_GRP_DSE_CSI                = IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 514         MX25_PAD_CTL_GRP_DSE_WEIM               = IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 515         MX25_PAD_CTL_GRP_DSE_DDR                = IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 516         MX25_PAD_CTL_GRP_DVS_CRM                = IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 517         MX25_PAD_CTL_GRP_DSE_KPP                = IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 518         MX25_PAD_CTL_GRP_DSE_SDHC1              = IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 519         MX25_PAD_CTL_GRP_DSE_LCD                = IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 520         MX25_PAD_CTL_GRP_DSE_UART               = IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 521         MX25_PAD_CTL_GRP_DVS_NFC                = IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 522         MX25_PAD_CTL_GRP_DVS_CSI                = IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 523         MX25_PAD_CTL_GRP_DSE_CSPI1              = IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 524         MX25_PAD_CTL_GRP_DDRTYPE                = IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 525         MX25_PAD_CTL_GRP_DVS_SDHC1              = IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL),
> 526         MX25_PAD_CTL_GRP_DVS_LCD                = IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
> 
> My bad. I only took i.mx6/7 into consideration when working this patch.
>>
>>>> Also If still checking mux_ctrl_ofs, we have no chance to set iomux
>>>> for i.MX7D IOMUXC_LPSR_SW_MUX_CTL_PAD_GPIO1_IO00, because the mux_ctrl_ofs
>>>> for this register is 0.
>>
>> The need is clear, but then the test mechanism should be changed, not
>> removed. You could find a free bit in mux_ctrl_ofs or in mux_mode or
>> elsewhere in IOMUX_PAD (e.g. bit 63, which is currently reserved),
>> something like NO_PAD_CTRL, or create a reserved value other than
>> __NA_ for mux_ctrl_ofs/mux_mode.
> 
> Stefano,
> 
> There is '#define NO_PAD_CTRL             (1 << 17)' now,
> we can add'NO_MUX_CTRL' and 'NO_SEL_CTRL(select input)', but need to check
> whether the __NA__ pads are used or not now.
> also need a big change for the layout and related macro definition:

Right

> 39  * MUX_CTRL_OFS:            0..11 (12)
> 40  * PAD_CTRL_OFS:           12..23 (12)
> 41  * SEL_INPUT_OFS:          24..35 (12)
> 42  * MUX_MODE + SION:        36..40  (5)
> 43  * PAD_CTRL + NO_PAD_CTRL: 41..58 (18)
> 44  * SEL_INP:                59..62  (4)
> 45  * reserved:                 63    (1)
> 
> Can we just use the following way, since only i.mx7 has the requirement of
> mux_ctrl_ofs maybe at 0. 
> if (is_soc_type(MX7)) {
> 	__raw_writel(mux_mode, base + mux_ctrl_ofs);
> } else {
> 	if (mux_ctrl_ofs)
>         __raw_writel(mux_mode, base + mux_ctrl_ofs);
> }
> I prefer this simple way for now, since we are at RC2 now. Later we can
> refactor the code using the way to provide macros NO_MUX_CTRL or NO_SEL_CTRL.
> What do you think?

Yes, it is ok for now, green light on my side.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================