[U-Boot] [PATCH v4 2/7] nios2: move altera_pio_init to board_early_init_r

Thomas Chou thomas at wytron.com.tw
Mon Sep 7 03:03:21 CEST 2015


As altera_pio_init() uses BSS, it should be moved to
board_early_init_r().

Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
Acked-by: Marek Vasut <marex at denx.de>
---
 board/altera/nios2-generic/nios2-generic.c | 13 +++++++++----
 include/configs/nios2-generic.h            |  1 +
 2 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/board/altera/nios2-generic/nios2-generic.c b/board/altera/nios2-generic/nios2-generic.c
index 834cbeb..384fee9 100644
--- a/board/altera/nios2-generic/nios2-generic.c
+++ b/board/altera/nios2-generic/nios2-generic.c
@@ -28,6 +28,15 @@ void early_flash_cmd_reset(void)
 
 int board_early_init_f(void)
 {
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) && \
+    defined(CONFIG_CFI_FLASH_MTD)
+	early_flash_cmd_reset();
+#endif
+	return 0;
+}
+
+int board_early_init_r(void)
+{
 #ifdef CONFIG_ALTERA_PIO
 #ifdef LED_PIO_BASE
 	altera_pio_init(LED_PIO_BASE, LED_PIO_WIDTH, 'o',
@@ -35,10 +44,6 @@ int board_early_init_f(void)
 			"led");
 #endif
 #endif
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) && \
-    defined(CONFIG_CFI_FLASH_MTD)
-	early_flash_cmd_reset();
-#endif
 	return 0;
 }
 
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
index 5bb7768..293acae 100644
--- a/include/configs/nios2-generic.h
+++ b/include/configs/nios2-generic.h
@@ -15,6 +15,7 @@
 #include "../board/altera/nios2-generic/custom_fpga.h" /* fpga parameters */
 #define CONFIG_BOARD_NAME "nios2-generic" /* custom board name */
 #define CONFIG_BOARD_EARLY_INIT_F	/* enable early board-spec. init */
+#define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_SYS_NIOS_SYSID_BASE	CONFIG_SYS_SYSID_BASE
-- 
2.1.4



More information about the U-Boot mailing list